Hier gibts bezahlbare Bohrer speziell für Alu. Ich habe aber noch keinen da bestellt, kann also nichts über die Qualität sagen...von DerEchteLanger - Allgemeines
Woher nimmst du einen Mipi-Adapter für dieses Display? Afaik gibts diese Adapter nur für ne Hand voll verschiedene Displays, z.B. iPad 3 oder das 1440p 5.5 Zoll Display des Wanhao D7. Ganz nebenbei brauch man auch das Z5 Premiumdisplay, was aber einfach sein sollte wenn man nur genug Geld in die Hand nimmt. Ausserdem bin ich mir nicht sicher ob diese extreme Auflösung noch großartig besser ist avon DerEchteLanger - Projekte
Dich. Du hast das VAT wenn ich es richtig verstanden habe aus Makrolon (=Polycarbonat) gebaut, die Verkleidung des Druckers aber aus Acryl. Jetzt dachte ich das Acryl irgendwie ungeeignet für das VAT ist, oder hattest du es einfach zur Hand?von DerEchteLanger - Projekte
Danke für die ganzen Links, da habe ich erstmal was zu lesen...von DerEchteLanger - Allgemeines
Toller Drucker! Das VAT besteht aus Polycarbonat, die restliche Verkleidung hast du aus PMMA gebaut. Hat das PC da einen besonderen Grund oder geht auch Acryl?von DerEchteLanger - Projekte
Da ich gerne Dungeons&Dragons spiele möchte ich Figuren dafür drucken, FMD ist aber gerade für kleine Sachen zu grob. Deswegen beschäftige ich mich in letzter Zeit mit DLP/SLA Druck. Hierbei stellen sich mir einige Fragen: 1. Aus welchem Kunststoff bestehen die fertigen Figuren? Z.B. bei Verwendung von diesem Harz: 2. Für fertige Drucker gibt es in meiner Preisklasse anscheinend nur den Wavon DerEchteLanger - Allgemeines
Ich habe mal zu beidem auf Wikipedia gelesen, anscheinend sind FR-1/FR-2/Hartpapier/Pertinax das Gleiche, FR-4 aber wie von Fridi angemerkt etwas anderes. Pertinax besteht anscheinend aus Papier und Phenolharz, FR-4 aus Glasfaser und Epoxidharz. Ich vermute mal das die Fasern beim Gebrauch als Druckoberfläche keine Rolle spielen, also wäre wichtig zu wissen ob Phenolharz oder Epoxidharz die besvon DerEchteLanger - Druck- und Heizbetten
Ich dachte ich hätte schon alles zu dem Thema gelesen, aber von FR4 höre ich zum ersten mal. Danke für den Hinweis, das gucke ich mir mal genauer an.von DerEchteLanger - Druck- und Heizbetten
Ich plane gerade einen Druckerneubau (CoreXY) und orientiere mich dabei an dem hier (allerdings kleiner): Sowohl bei diesem Drucker als auch bei sehr vielen anderen wird eine PEI Folie als Druckoberfläche empfohlen, da man diese nicht vorbereiten muss (ausser sauber machen). Blöderweise kann ich eine solche Folie nicht bezahlbar finden. Auf Amazon findet man 2 Anbieter: Primafil: Scheint Betrugvon DerEchteLanger - Druck- und Heizbetten
Oh, never thought about the screws not being centered. I will use linear guides, so i hope the wobble wont be to bad. The screws are toleranced 7.9mm to 8mm, with a micrometer i can check which end is closer to 8mm and mount that one in the bearing, maybe together with a carefully selected shim. Im not sure what to choose there, maybe folded aluminium foil.von DerEchteLanger - Mechanics
Im currently planning a small CoreXY machine and want to use a screw drive for my Z-axis. Since i want to use 2 screws and keep them synced with belts (using one motor) i need to use something else to "carry" the load (whats the right word for this? there doesnt seem to be an appropiate translation for the german verb "lagern"). I found those flangle bearings: and want to combine them with thisvon DerEchteLanger - Mechanics
QuoteQdeathstarGrizzly g0672 I found this on amazon: Are you sure its a milling machine?von DerEchteLanger - CoreXY Machines
Is there a specific reason you used nylon washers instead of normal ones or were those simply the ones at hand? My concern regarding the printed bushings is that they have to carry the belt tension, so i would expect them to creep. This would lower the belt tension over time...von DerEchteLanger - CoreXY Machines
You mentioned on page 3 that you are using printed bushings for the larger bearings, which have a 17mm bore. Knowing that you dislike using printed parts in important structural parts i wonder how those hold up to the load. Which material did you use to print them?von DerEchteLanger - CoreXY Machines
Which acceleration are you using now on the X/Y axis? I remember you had to reduce it to 1500m/s back when using a pen, how did that change when mounting the extruder? Im asking because i could use that number to calculate the actual flexing of the linear rails. Why do you screw your levelingscrews into teflon blocks? Those are realy hard to find.von DerEchteLanger - CoreXY Machines
Im not sure which railwidth i should choose for the linear rails. I will propably order from Misumi, the ones i would need arent much more expensive than good used ones on ebay (which is so flooded by chinese shit its hard to find something else). It boils down to the decision between 12mm and 15mm width, they are 38,50€/41,37€ for about 350mm. Now the question is, which ones to choose for the X-von DerEchteLanger - CoreXY Machines
QuoteQdeathstar I am building this with a drill press. It's still a work in progress. I use higher quality digital calipers and a starret center punch to lay everything out, then I drill the holes. You need high quality drill bits and taps. When I made my measurements I made them from an uncut side so they would be the most accurate. I spent $60 on some taps and $90 on some drill bits for this prvon DerEchteLanger - CoreXY Machines
Currently im on a Anet A8 and am getting realy fed up with its poor quality. After realising i would have to replace the whole printer to get decent quality im now planning to go all the way, a "digital-dentist-style" printer would propably satisfy my thirst for better quality, it seems realy awesome! I only need 200mm^3 build volume, but i think lots of lessons from your printer projects stillvon DerEchteLanger - CoreXY Machines