Salut kyrian, Oui. c'est parti. pas de problème.by smartfriendz - RepRap Groupe d'Utilisateurs Francophone
I hope it will work for you ? About the bended huxley head support, it's THE black point of the smartrap actually.. working hard on it to make it better. For waiting, you can maybe try the hair dryer method . All structure is in PLA and a hair dryer applied to it around one minute long..or less, make it soft ! ( it's a little scary by the way !). I repaired a lot of not so good parts like thaby smartfriendz - Smart_Rap
thanks guys. That's pretty clear to me : no imperial ! ( but i like the name .. imperial smartrap..good for ego To be honest, i was a little scared because until i would redo the all design in something like openscad , I don't see when i could work on the adaptation , it's a lot of work , and i even couldn't test easy from France. I think the only imperial we have left here are those gaz plumbby smartfriendz - Smart_Rap
Would it be nice to have the smartrap in imperial ? i wonder..by smartfriendz - Smart_Rap
cool ! Oui tu as vu les rendus ? wow ! pour les matrices, c'est super. j'avais pas pensé a faire comme cela. Je vais integerer ca sur le marlin smartfriendz . Pour le fil, je ne suis pas complètement certain de ce qui s'est passé mais je vois que j'avais pris un caperlan 0.35 13kg complètement par hasard et que ca tournait super bien. Une fois fini ( 400 metres quand meme, ca m'a fait 50 kitby smartfriendz - RepRap Groupe d'Utilisateurs Francophone
Salut morphin , Thingiverse est bien a jour et unifié ( je le mes a jour régulièrement) . La BOM est a jour également par rapport aux pieces a imprimer justement. C'est la que je place le release . github est la , plus pour choisir d'autres options ou des versions différentes. Il n'y a pas de BOM pour chaque version ou option, malheureusement . Pour être tout a fait précis, c'est mieux de cby smartfriendz - RepRap Groupe d'Utilisateurs Francophone
ha yes .. why didn't you wire it up ? i know you do nothing all day long seriously, i'm very curious about it .. but i'm sure it will run very good. It's nice design , no doubtby smartfriendz - Smart_Rap
je pense que c'est réparé. Je n'avais pas vu le français deja installé et j'ai ajouté un français utf8 .. visiblement il n'a pas aiméby smartfriendz - RepRap Groupe d'Utilisateurs Francophone
haha oui oui , désolé . Quand j'ai cliqué la premiere fois, c'est allé vers la page d'accueil de SMF.. c'est pour ca que je demandais. La, c'est bon, ja'rrive dans le bon thread. MErci. je vais lire un peu et voir si c'est compliquéby smartfriendz - RepRap Groupe d'Utilisateurs Francophone
I would like to integrate it in smartfriendz marlin . I would like to implement the M556 gcode like reprappro did with the omerod and like it is written in reprap.org ( ) . I can't tell why it's not in marlin, I've asked there on github but people just laughed at me ?!?! . I've been said that " A hardware problem shouldn't be recovered by software .. you must do a better design ! period. Yourby smartfriendz - Smart_Rap
sorry , shouldn't talk about that especially in english .. too big for me i think . in resume for me , reprap is not standstill only 0.1% of world population know its existence .. at the most , there's still room to progress i think.by smartfriendz - General
ha ok. bizarre. le lien vers smf, tu voulais pointer vers un truc particulier ?by smartfriendz - RepRap Groupe d'Utilisateurs Francophone
about capitalist/communist subject, i find it normal it comes back often in open source business model talks . Even if it's not really that simple and certainly not adapted, it's true that in open source business model, you don't capitalize on the idea, you only sell your work ( service, products). In the contrary, with "classical" business model, you get an idea, you protect it and try to capby smartfriendz - General
J'ai du coup découvert tapatalk , grace a hubert ! Je crois que je vais rester la dessus car on a juste les post rangés par date , toute rubrique confondues..c'est parfait pour moiby smartfriendz - RepRap Groupe d'Utilisateurs Francophone
mince ! je vais regarder de plus pres.. je teste avec chrome sous os x et je ne vois pas de problème pour l'instant. peut être windows ?by smartfriendz - RepRap Groupe d'Utilisateurs Francophone
Cool Christian. je suis conter. c'était ca ! Salut angélus, J'attends la poste ! grrr. En plus, comme je pars une semaine du 19 au 26, j'ai l'impression qu'on va droit vers une mise en ligne a partir du 26 , sinon je ne pourrai pas envoyer les kits, ce qui rend le nouveau mode de livraison un bancale. Cela me permet aussi de bien checker ce que je reçois et non de juste mettre en boite , eby smartfriendz - RepRap Groupe d'Utilisateurs Francophone
yes and no. The main real ease uses now 6mm rods , but there is a 049 version for 8mm rods ( stl/dev/049_8mm/ ) . There is only one plate there for now. i need to re-export all parts from the blender . Will be done soon i think .by smartfriendz - Smart_Rap
haha, you're right traumflug, was just kidding IT happens often people not involved in open source projects are calling me about Smartraps and after a good talk, I strongly advice them to buy a ready made product ! not a reprap kit. Usually they come back after a while to thank me because they where in fact just looking for a cheaper product , nothing more !by smartfriendz - General
QuoteTraumflug By your measures you should build a WolfStrap. Still the cheapest design, safe, and it works. or buy a product ? it's safe, it works ( usually) , and no one will bother you with some weird marxist philosophy you pay, you use. simple .by smartfriendz - General
Yes christian, But i wanted to use only one bearing hehe. like there's no cheap saving ? If we can't find a good way to make the axis straight, i will come back to this solution ( the first smartrap doing this was back in december). The other problem is that i removed the support you see here.by smartfriendz - Smart_Rap
Salut Yome, C'est pas une folie, le système a servo fonctionne plutôt bien. Je l'ai stoppé car dans l'état, c'était assez compliqué a monter / régler . Les pieces avec le servos sont vraiment trop petites et l'adaptation était un peu trop difficile pour la cible visée avec la Smartrap. Sinon, c'est evident qu'il y a moins de pression. Par contre, avec le hack sur marlin, je m'aperçois que la pby smartfriendz - RepRap Groupe d'Utilisateurs Francophone
Hi Dan , I think we will have a lot of wow, aaaww and compliments on the next posts Impressive ! I think i'm going to try the 8mm for z axis ? I've never thought it could be a problem or that 8mm could make it better. thank you for the tricks.by smartfriendz - Smart_Rap
bonne idée . j'ai fait un user mods ( customistation ) , je vais ajouter les réalisations . experience aussi. pas mal merci cyprinby smartfriendz - RepRap Groupe d'Utilisateurs Francophone
oui. il faut que je fasse un compte la bas j'imagine Je vais le faireby smartfriendz - RepRap Groupe d'Utilisateurs Francophone
Il y a effectivement un plugin tapatalk. installé je connaissais pas ce forum..pas mal. tout est clair .by smartfriendz - RepRap Groupe d'Utilisateurs Francophone
ha merci Je suis content que ca plaise.. Non, je veux faire des rubriques.. bien sur. C'est justement le but. tapatalk ? je vais voir si il y a un plugin. Je voulais trouver un forum open source multilingue ( interface et rubriques générales.. pas les posts ) . Celui la peut avoir un menu de langue pour l'interface au moins. c'est deja ca. Je ne pensais pas séparer français anglais.. jeby smartfriendz - RepRap Groupe d'Utilisateurs Francophone
Salut oikos, wow genial le montage . bravo ! j'ai installé un forum smartrap pour le support , et autre, chez smartfriendz. Ce n'est plus tenable d'avoir tout ici , n'est ce pas ? surtout le support commercial n'a pas a être ici , désolé pour cela d'ailleurs. Je n'ai pas encore fait trop de rubriques.. je ne sais pas trop quoi faire . a voir ?by smartfriendz - RepRap Groupe d'Utilisateurs Francophone
To answer to maboo, on the "true" reprap spirit, I can say some are trying to keep it alive ( like me ) I know perfectly that printed structure for a reprap is not as good as metal or aluminium one and it's lot more challenging to have it working well. It just depends of what people are looking for ? On my side , i decided to don't look after the top notch quality 3d printer, because to doby smartfriendz - General
You're quiet right Madmike thx for the compliments . On my side. I make really a little pause in design from this 0.4.9 version , which is release on thingiverse now. I'm quiet happy with the result and my 4 smartraps in production are really going well now ( not something breaking every two days now ). I will on next months improve the actual design to make it more easy to assemble and fitby smartfriendz - Smart_Rap
Hi Christian, Thank you for those feedback. I can only agree with all that About the Z , I think that making a triangle would be the best too, with maybe two threaded rods going on the back , behind the steppers and attached on the top. That would make a solid triangle reducing the flexibility of those two smooth rods. It is that or using M12 smooth rods like in the ptrintrbot simple. I wouby smartfriendz - Smart_Rap