Does anyone know how to fix oval circle? i want to print it circle but they gave me a oval circleby stevenkw1 - Reprappers
firmware is inside the website i was sharedby stevenkw1 - Reprappers
Hi my printer right now having this issues i was bough from amazon model hictop 3DP-11 Prusa i3 , and now the issue is when i printing something i put my object( stl file ) to CURA 14.5 , and print right? Yes and my 3D print is printed but the thing is it automatically 1 object become 2 or 3 time object which mean it finished first layer and it come back for first layer again and again till theby stevenkw1 - Reprappers
Hi everyone right now i having problem with my Hictop 3dp08 i just bough it from amazon.ca like last few week but after i build it ( calibration , motor current everything is ok ) software to pring CURA 14.13 setup all the information follow HICTOP give but when i go print the printer have problem with stop in mid way , which mean the printing job is not finish yet then the Cura software stop myby stevenkw1 - Reprappers
@scottybfg im did alot research before i setup my 3d printer , but standard of REPRAP Ramps 1.4 standard is 1/16 so in my case do u have any suggestion right for me?by stevenkw1 - Reprappers
@Dush my 3d printer is using cable not using rod like another people they have so i may have some different number on x , y ,z yes i have endstop ( NC switch ) for each axis ( max )by stevenkw1 - Reprappers
Right now i have x , y ,z axis and extrude temp ok with marlin firmware all the x ,y ,z calbration is good if i move 50mm when i measure it give me 50mm , i dont know what going on in my 3D printer when i click on print with software reptier host thats will run to my max pos and stop right there i cant print it anyone know what is going? /** * Marlin 3D Printer Firmware * Copyright (C) 2016 Maby stevenkw1 - Reprappers
i have the words file , please help me fix this problem , its may be i set the Home is incorrect? Or something wrong with my firmware or software?by stevenkw1 - Reprappers
21:12:04.890 : echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s) 21:12:04.894 : echo: M205 S0.00 T0.00 B20000 X20.00 Y20.00 Z0.40 E5.00 21:12:04.894 : echo:Home offset (mm) 21:12:04.894 : echo: M206 X0.00 Y0.00 Z0.00 21:12:04.898 : echo:Material heatup parameters: 21by stevenkw1 - Mechanics
21:12:04.890 : echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s) 21:12:04.894 : echo: M205 S0.00 T0.00 B20000 X20.00 Y20.00 Z0.40 E5.00 21:12:04.894 : echo:Home offset (mm) 21:12:04.894 : echo: M206 X0.00 Y0.00 Z0.00 21:12:04.898 : echo:Material heatup parametersby stevenkw1 - Reprappers
you should have 240W for your heat bed , the heat head print is think around 100w something im not sure . My DIY 3D printer what I'm building now is use the 12VDC 500W ATX Power Supply for itby stevenkw1 - Reprappers
did u wiring your heat head correctly and enable your D10 port ?by stevenkw1 - Reprappers
so which mean is should entering my coding like the one u giving me? Go to the Configuration.h file in Marlin, and edit this line: #define INVERT_X_DIR true/false Reverse the true/false that's in there right now. For setting up the homing direction, in the same Configuration.h file, go to the following 3 lines: #define X_HOME_DIR -1/1 #define Y_HOME_DIR -1/1 #define Z_HOME_DIR -1/1 and choose tby stevenkw1 - Reprappers
1) My Repetier-Host software having problem with X and Y or Z when i click on "+50" it move to "back" and when i click on "-50" it move to front how can i invert this 2 signal? Like +50 it move to front , and -50 movie to back . 2) And also does anyone know how to setup the Home Direction for my 3d printer RAMPS 1.4? Because right now i click on Home they not run back to mid plan they run everywby stevenkw1 - Reprappers
actually how many end stop do we need on the 3d printer? its 3 is enough? ( x , y ,z axis )by stevenkw1 - Mechanics
so which mean if i enter that number to my define DEFAULT_AXIS_STEPS_PER_UNIT ( 8000, 8000) ? it should work? Y axis long = 47cm => 470mm , X axis long = 27.5cm =? 275mm , so not that long because my friends his gift me the base for free so i dont need waste my money to buy the materials ( linear axis , step motor , etc... ) that axis base is have everything the thing i need to buy is Rampsby stevenkw1 - Mechanics
/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option)by stevenkw1 - Mechanics
Hi i have question about my 3D printer , the x , y axis is working perfect but i dont know how to do the calculation about x ,y axis because i need to know how many mm per step i can move for 200 turn for my Reprap RAMPS 1.4 board , and my microstepping is 1/16 . Does anyone know how to do it? Or any code or software to help me calculation of it? My X , Y axis that look like cable ( metal cable )by stevenkw1 - Mechanics