forget the ceramic hot end. I had a rostock builder over at the shop last week showing off his parts and he told me that the heat in the hot ends would melt the filament in the wrong place. I tried to message you on FB but it went to your other folder. FB asked for 41 pesos to send you a message.by metzindustries - Philippines RepRap User Group
Facebook won't let me send you a message without paying moneyby metzindustries - Philippines RepRap User Group
Still not happy with the y axis design. It seems to have a lot of friction. Will be back on the drawing board tomorrow. Thinking I might use plastic rollers on the top and bottom of the smooth rod instead of a plastic linear bearing design.by metzindustries - Philippines RepRap User Group
I will have some pics up in a couple hours. got the frame mostly made. they are welding it and the y axis now. I abandoned the anglebar design and just used 4mm plate. this thing is turning into a monster. the frame is strong enough to mill with.by metzindustries - Philippines RepRap User Group
After a lot of false starts, finally building here. Electronics have been ordered and parts are being cut out. Today I made several y axis designs from thingiverse. Turns out most of the laser designs don't really translate to 2mm ms plate. I am getting closer to a design with the aim of low parts count and ease of reproduction. I was thinking I could bend parts on the press brake and it wouby metzindustries - Philippines RepRap User Group
cant see the pictures...by metzindustries - Philippines RepRap User Group
Sulit has most of the electronics needed, the rest I can make or source within a 5 minute walk from my shop here. I really want to get this going.by metzindustries - Philippines RepRap User Group
what if I host a hacker space conference at my shop weekend after next? I can get several participants from one of my facebook groups. My shop is easily accessable by public transport. Just LRT to Santolan Makati, then the Cogeo FX for 15 minutes. We need a leader though to do the parts list, and sourcing.by metzindustries - Philippines RepRap User Group
We have a group kind of now. Me, my neighbor who is mechanical engineer, and Roger. Roger has gone missing in action these last few weeks though. We are all ready to build some printers. thinking we can knock out one or 2 in a weekend. We can get just about every part needed except the board and steppers within a 10 minute walk from my shop. The rest we can make in my shop on the CNC plasby metzindustries - Philippines RepRap User Group
We are working on getting ours up and running. Prob be a month or so before we can do a rough print.by metzindustries - Philippines RepRap User Group
i contacted the seller but dead silence. my guess is the guy is a paid internet promoter.by metzindustries - Philippines RepRap User Group
I have customers right now who will buy 3D printed products made on a extrusion type machine. I really need to get one built.by metzindustries - Philippines RepRap User Group
@roger. sent you email...by metzindustries - Philippines RepRap User Group
Non existent for the most part. I am really looking for someone to help me build my first machine. I have the shop and am willing to trade or barter to get one going. For example I supply the parts and shop, someone builds 2 and keeps one as payment...by metzindustries - Philippines RepRap User Group
I am for a meetup. I can host at my shop in Antipolo. We are 15 minutes by jeep from LRT Santolan station Marikina.by metzindustries - Philippines RepRap User Group
nothing came inby metzindustries - Philippines RepRap User Group
We are up and running here in Manila now. Marcos HIghway in Antipolo. We can do CNC plasma and TIG welding.by metzindustries - Philippines RepRap User Group
Hi, We are a American owned small CNC shop located in the Philippines. We make custom CNC cut parts for the makerbot, reprap or any other custom design. We can make all your cases, and flat cut parts, and powder coat them too. Want a steel case that is powder coated? We can do it! Find us on facebookby metzindustries - Job Shop: I make stuff!
I have a 24x48 inch CNC plasma table. Can cut up to 1/2 inch thick with the Hypertherm powermax45 torch. Accuracy around .03 inch. Accept paypal, and Xoom.com. Will ship anywhere in the world. File requirements .dxf file with all shape nodes joined. Example a polyarc circle of 4 nodes. All nodes need to be joined together otherwise the machine does not see it as a complete shape and Iby metzindustries - Job Shop: I make stuff!
CNC shop up and running in Antipolo. Looking for collaborators to build a printer....by metzindustries - Philippines RepRap User Group
Still looking to work a meetup and possibly do a repstrap project.by metzindustries - Philippines RepRap User Group
I just got software to make custom sprockets. Still looking to set up a meetup next monthby metzindustries - Philippines RepRap User Group
Umknowmthos was a 3 year old post?by metzindustries - Let's design something! (I've got an idea ...)
I am opening up my CNC shop tentative march or April of this year. (depending on building construction speed) I have a CNC plasma table and can fabricate parts in steel, stainless, and aluminum with a resolution of .0006" inch. I can can cut up to 1/2 inch thick from the center and 5/8 inch starting from the edge of the material. I can cut up to 150 inches per minute, depending on the thickneby metzindustries - Job Shop: I make stuff!
Has anyone thought of using conductive paint to create circuits? This is the same stuff they use to bronze baby shoes, chrome coat plastics and to make those heating elements on window defrosters.by metzindustries - Wire and Thread Embedded Extrusion
Here is the model of torch table I have. Not picture of mine as it is still in the crate waiting for me to get home.by metzindustries - Philippines RepRap User Group
I am unsure the date I will be home. I am working in Kuwait but I will be home in a few months. I have not gotten a 3D printer machine yet, I was planning on building one from scratch and buying only some of the electronics and hardware. I have a CNC plasma table that I can cut out gears, and other parts on. I am still learning how to use the software, it has been a big challenge to learn. Iby metzindustries - Philippines RepRap User Group
Has anyone tried downloading the free 3D computer model files off of turbosquid and printing them in 3D? They are 3d models designed for Animation, however I dont see why they could not be converted to print pretty easy... for this example of a car modelby metzindustries - Let's design something! (I've got an idea ...)
I would like to do a meetup when I get home. I can host in Antipolo. Easy to get here. Santolan Station, then FX to Antipolo, then trike to the my subdivision gate. Or drive...by metzindustries - Philippines RepRap User Group