I'm getting the following compile error when enabling AUTO_BED_LEVELING_UBL I'm using a FLSUN Delta printer, marlin geforce-8a-ac firmware. Attatching my config files. I tried moving declarations around to handle the undefined and got overloading method compile errors. Can some please give me a hand getting UBL up and running on my delta? Arduino: 1.8.5 (Windows 7), Board: "Arduino/Genuino Mby aunueget - Firmware - Marlin
cdru, That was it. I tried Repetier Host last night and everything was fine so I had narrowed it down to pronterface. I'm not to smart. I thought that the 300 in the mm/min was how much it goes when you hit reverse because its directly next to the reverse button. I never understood why it was so high in reverse and it never seemed to go 300mm in reverse. I'm an idiot. I set that to 5 becauby aunueget - Stepper Motors, Servo Motors, DC Motors
cdru, How do I check the speed(mm/min). Is this a setting in my configuration.h in marlin or some gcode command in pronterface?by aunueget - Stepper Motors, Servo Motors, DC Motors
Thanks for the quick reply cdru. You are totally right. So the real problem for me is when i press the extrude button in pronterface and it mostly does a very low vibrate and barely moves.(not feeding the 5mm). Both printers are doing it now after all the above testing. Is there a way to see what commands pronterface is doing when i hit the extruder set to 5mm? Aby aunueget - Stepper Motors, Servo Motors, DC Motors
Hi all my first post. So i have two prusaI3 printers. One for plastic and one for experimenting with mig welding. prusaI3 greg/wade Extruder Marlin ramps1.4 So while i was experimenting with mig welding i ran my extrude stepper really hard. +#define DEFAULT_AXIS_STEPS_PER_UNIT {64, 64, 4680, 1100} +#define DEFAULT_MAX_FEEDRATE {500, 500, 2, 178} // (mm/sec) At one point i hadby aunueget - Stepper Motors, Servo Motors, DC Motors