Quotedc42 If you use M401 to deploy the probe at the start of bed.g and M402 to retract it at the end, then it won't deploy and retract on each G30 command. Thanks, problem solved. /Thomby Captain_sq - Duet
Quotenumber40fan I think his point was to remove the deploy and retract probe folders. Yes, I understand . My second question is about why it makes sense to do the deploy/retract sequence (IF you have a retractable probe) at each and every single probe point (G30) instead of once per invoking of the the bed.g macro. To me, it makes more sense to control this behavior in the bed.g file itself usiby Captain_sq - Duet
Hi dc42, Thanks very much for the fast response. That explains it. One further question comes to mind; it seems like the deploy and retract .g files are invoked before and after each G30 command, even inside the bed.g file which will result in the deployment and release of the probe (in case the probe is of the retractable kind) for each probe point. Is this intentional? Best regards /Thomby Captain_sq - Duet
Hi, Got myself a custom built Mini Kossel delta with a Duet 0.6 as controller. I use dc42's 1.19 fork of the firmware with the same DuetWebControl. I managed to calibrate it fairly with the help of Eschers wizard but still have a deviation of about 0.83. It moves correctly in all directions using G0 and G1 commands and homes. It's when I start the auto calibration feature strange things start toby Captain_sq - Duet
The termistor types have been quite static for a while. Any more types added not yet documented?by Captain_sq - Smoothie