Narrowed it down some more by launching the executable from the command line. If I load a STL, then try to slice it, I get 2014-06-28 01:27:16.569 Repetier-Host Mac[1106:507] pypy:/Developer/Applications/CNC/Repetier-Host.app/Contents/Resources/pypy.app 2014-06-28 01:27:41.241 Repetier-Host Mac[1106:507] *** -[__NSArrayM objectAtIndex:]: index 4294967295 beyond bounds [0 .. 6] 2014-06-28 01:27by bjoerngiesler - Repetier
Hi, I have a very strange problem with RH 0.53 and 0.56 (upgrading did not fix it). It popped up from one day to the next, and I have no idea what I did wrong. When I open RH, after about half a second after the main window shows, the log widget disappears. I don't know how to describe it better. The window frame is still there, but it is grey, the widget with the green time part and the whiteby bjoerngiesler - Repetier
Also doch eine "richtige" Spindel? Das widerspricht dem, was Uwe94 oben schreibt; wenn die Plattform schon zu schwach ist, die Kräfte vom Fräsen aufzunehmen, dann wird sie auch nicht genug Querkräfte aufnehmen, um einen 50er Proxxon zu killen, oder? Klar, ein Kress-Motor wäre mir ja deutlich lieber...by bjoerngiesler - Extruder, Hotends & verschiedene Materialien
...ich hab aber keinen Mendel, sondern einen ORDBot... Fahre nachher mal in den Baumarkt, nehm mir einen Proxxon 50 mit und drucke testweise eine Halterung.by bjoerngiesler - Extruder, Hotends & verschiedene Materialien
So I've finally managed to get my V4.1.1 soldered up and assembled. Haven't built it in or tried printing yet. First of all, I had no problem assembling it. It has nice wrench grips on both sides of the thin steel tube, so there's no need to put any stress on the tube at all. And there are warning messages plastered all over the place. It looks really nice, solid piece of engineering. It's notby bjoerngiesler - Plastic Extruder Working Group
Ich hab jetzt eine Weile gesucht und finde jede Menge Leute, die eine CNC-Fräse in einen RepRap verwandelt haben, aber fast niemanden, der den umgekehrten Weg beschritten hat. Ein paar Anfänge gibt es, aber die sind zum großen Teil schon sehr alt. Jetzt ist mir ja klar, daß so ein RepRap-"Schwächling" nur schwer Alu odergar Härteres fräsen kann, aber ich überlege doch, ob ich nicht mal probiereby bjoerngiesler - Extruder, Hotends & verschiedene Materialien
Danke! Verflucht, vor zwei Wochen haben die mit genau so einem Zeug unseren Ofen gemauert. Hätt ich mal was abgezweigt :-)by bjoerngiesler - Extruder, Hotends & verschiedene Materialien
Hallo zusammen, kann mir jemand sagen, unter welcher deutschen Bezeichnung ich "Fire Cement" finden kann? Will mein seit Jahr und Tag hier rumliegendes Arcol-Hotend zusammenbauen, aber der Fire Cement ist durchgetrocknet... Danke & Gruß, Björnby bjoerngiesler - Extruder, Hotends & verschiedene Materialien
Nope, reset after connect doesn't help. An option would be nice :-)by bjoerngiesler - Repetier
Hi, I upgraded to Repetier-Host Mac 0.56 recently, but it seems it doesn't like my printer... After "connect", all communications just hangs, and nothing happens in the log window. Downgrading to 0.53 fixes the problem. I'm on Mountain Lion (OSX 10.8.3), my printer communication settings are 250kbps/8N1. Any idea what I could try? Regards, Björnby bjoerngiesler - Repetier
Very cool, thank you very much! BTW, would uploading files to SD card be much faster using your binary protocol? That would be a compelling reason to switch to Repetier firmware... I'm using Marlin right now.by bjoerngiesler - Repetier
God, I am dumb. I never used the upload button before, always saved directly to SD card on the computer then put the SD card into the printer. Thanks a lot for this advice! Still, I'm in the process of uploading a file, and the uploading process (70k lines) takes 15 minutes... this isn't really practical either. So I'd still be happy if the save button behaved similar to the upload button with rby bjoerngiesler - Repetier
Hi, I've recently switched to the excellent Repetier-Host for job preparation and control. I love it! Especially the STL composer is an awesome tool. One question though: I often print jobs from SD card, so I use Repetier-Host to compose the STL, generate G-Code, then save the generated code to SD card and print from there. Problem with this: When Repetier-Host saves the G-Code, it doesn't prepby bjoerngiesler - Repetier
Hi, I'd like to power my RAMPS from 12V to be able to print from SD card. My board doesn't have a D1 diode fitted yet, and I have a couple of IN4002 diodes here but no IN4004. Since I have little electronics experience, can someone please tell me if I can just use an IN4002 instead? Thanks in advance, Björnby bjoerngiesler - RAMPS Electronics
That's one more advantage of the V4, it mounts to a standard Wade.by bjoerngiesler - Plastic Extruder Working Group
Hi all, I'm thinking about getting an arcol.hu hot-end for my first RepRap since I don't have the tools to make my own, and this is available locally in Germany and even quite cheap. Many people have used the V3 Arcol hot-end with good results. However, the one I could buy is the V4, which is quite hidden on the Arcol site (the article is at http://wiki.arcol.hu/v4-announcement, but it's not lby bjoerngiesler - Plastic Extruder Working Group