problème réglé avec du tape de peintre bleuby The-ez - Canada, Montreal RUG
at first hot end jamming that i solved by buying a new one. right now just multiple minor problems like my Z axis jamming (i thinks i'm not aligned somewhere) also, i was able to print like 3 layer of a small piece (20mm cube) but when it was printing the 4th layer the piece got stuck to the hot end and moved along with it as soon as i'm going to be able to fix that, i think i will have adjustmenby The-ez - Canada, Montreal RUG
QuoteMozx90 I built my i2 pursa , but I'm having software problems .... So I have not printed anything yet do you still have problems? maybe we could help each otherby The-ez - Canada, Montreal RUG
Salut tout le monde. premièrement je voulais vous prévenir, je suis très débutant en impression 3D! J'ai fini de monter ma prusa i2 cet après midi (après avoir eu de la misère avec un hot end qui se bouchait continuellement) Au moment d'imprimer le cube de 20mmx20mm (ma toute première impression), les 2 ou 3 premiers layers se sont imprimés "correctement" (besoin d'ajustements mais quand même cby The-ez - Canada, Montreal RUG
here's a picture of the filament :by The-ez - General Mendel Topics
seems like i have another issue.... i don't know yet what i have done wrong but there's a problem with my extruder or my hot end (or both) i put the PLA in, press the extrude 5mm button on pronterface, everything seems to works, i manage to have matter going out of the hot end (it also work if i do it manually but pushing the filament with my hand) i set my home position, start a print, the firstby The-ez - General Mendel Topics
raoullevert Wrote: ------------------------------------------------------- > Il peut aussi arriver que le plastique fonde sur > une trop grande longueur et bien avant la buse. > Dans ce cas le fil est trop mou pour être poussé > correctement. est ce que tu as une solution par rapport au plastique qui fond sur une trop grande distance? merci Manuby The-ez - RepRap Groupe d'Utilisateurs Francophone
Thanks sweaving that was the answer i was looking for! i ran a dry test (without PLA) and all the movements were accurate as soon as i find some time later i'll try a real print thanks a lotby The-ez - General Mendel Topics
can it be related to a slic3r setting by any chance?by The-ez - General Mendel Topics
at first i wired everything according to . at least i think i did but i had issues so i unplugged all the endstops. i ran a test with a different socket and it's weirder : my Z axis won't go down unless i press the endstop isn't it supposed to do the opposite?by The-ez - General Mendel Topics
it's worst actually the carriers goes the good way but never stop i have to unplug the printer is there a way to set the home position manually?by The-ez - General Mendel Topics
hey everybody. this morning i finished the assembly of my prusa mendel v2. using marlin on my RAMPS 1.4 slicer and pronterface on an iMac everything works fine, i mean i can move every axes by pressing the buttons, i ajusted the distances in marlin #define DEFAULT_AXIS_STEPS_PER_UNIT {76.91,79.777,1770.7,760*1.1} so it appears to be in order. i tried to print without PLA just to see if theby The-ez - General Mendel Topics
when i extracted the RAMPS14test file i got 2 files : ramps14test.ino and thermistortables.h i ran the .ino one and it works for me but just like you i'm very new at 3D printing...by The-ez - RAMPS Electronics
Hey thanks a lot!! i was really lost on this one i realized i haven't define the motherboard nor the thermistor...... your advices were very very helpful! i might need some help later but for now i'm good thanks Manuby The-ez - RAMPS Electronics
I finally managed to instal marlin, thanks But of course I have more issues... Error 0 : Extruder switched off. MINTEMP triggered And my hot end is not heating anymore... But it's probably not part of this topicby The-ez - RAMPS Electronics
thanks, i have more questions.... where do i find the "real" program? i ran so many randoms tests that now, nothing works anymore.... and a green LED blinks...by The-ez - RAMPS Electronics
Hello everybody, I have the same issue unfortunately i don't understand a word of what you have done to resolve it... can you explain it to me like if i was a 2 year old child ? kinda step by step thing? thanks Manuby The-ez - RAMPS Electronics