Category:8/16-bit board

From RepRapWiki
Jump to: navigation, search

This page shows Reprap Controller Boards or "Shields" (for 3D printing, laser, CNC etc.) that use (or can use) an 8-bit or 16-bit Micro-Controller. Note: some boards, particularly if designed as Arduino "Shields", may actually also be compatible with a 32-bit MCU, but some such shields may (or may not) require modification: see their actual page for details.

Pages in category "8/16-bit board"

The following 7 pages are in this category, out of 7 total.