Hi,
I've have amount 4 printers now, so I have a lot of spare electronics.
I remembered I could motorize my camera slider with it.
The mechanical part is almost done, I'm still deciding if I use a threaded rod or some pulleys to move the slider.
What I want: to use the arduino+LCD module (I have one of those with a rotary and SDcard, but I dont really need the SDcard part) to power the motor to make my slider...slide
What I need is to find out the quickest way to connect a polulu and the LCD/sdcard module directly to arduino without the ramps.
I realize it shouldn't be much difficult, I would only need to trace the connections from the ramps to the arduino, but if someone has done it already and knows what connects to where, it would save me a lot of time.
And the the firmware part... I would need a simple LCD interface where I would select items from the menus (like I have on my printers with Marlin).
Any help would be greatly appreciated.