Welcome! Log In Create A New Profile

Advanced

SD Card interface by LC Studio SDCARDDETECT hack

Posted by disneytoy 
Forum List Message List New Topic
disneytoy
SD Card interface by LC Studio SDCARDDETECT hack
October 08, 2013 03:36PM
Hi!

I'm trying to add a SD Card interface board made by LC Studio/lcsoft.net



I want to do the SDCARDDETECT Hack, but not sure what pin I need to solder the wire to?

Any help please.

Thanks

Max
Reply Quote
Justblair
Re: SD Card interface by LC Studio SDCARDDETECT hack
October 08, 2013 07:28PM
Sorry it's a rotten picture but this might help
Google+ piccie

The white wire detects the Sd card. The pins it is soldered to is normally 3v. I cut the trace on the board to disconnect the pin from the 3v trace and then soldered the white wire to the broken trace on the pin side.

Edited 1 time(s). Last edit at 10/09/2013 03:47AM by Justblair.
Reply Quote
disneytoy
Re: SD Card interface by LC Studio SDCARDDETECT hack
October 09, 2013 01:32PM
So its the 5th pin from the top.
Reply Quote
Justblair
Re: SD Card interface by LC Studio SDCARDDETECT hack
October 09, 2013 02:34PM
Yep
Reply Quote
sanzr
Re: SD Card interface by LC Studio SDCARDDETECT hack
January 07, 2014 01:06PM
Quote
Justblair
Yep


Hello justblair I am trying run this sd to my ramps 1.4

But I not understand the photo of second commentary

it is i understand

I CUT TRACK OR NO

THANKS
Reply Quote
Newer Topic Older Topic
Sorry, only registered users may post in this forum.

Click here to login