DIY Tiny OLED I2C full graphics controller
Posted by enif
|
Re: DIY Tiny OLED I2C full graphics controller September 26, 2015 06:23AM |
I'm using MEGA / RAMPS 1.4 with Marlin 1.0.2 and 1.1.0 rc1.
other components:
2.42" OLED Display I2C configured
SD card module
Encoder
Beeper
The SD module is wired to AUX 3 on Ramps
Encoder and Beeper like REPRAP_DISCOUNT_SMART_CONTROLLER
Display is on SCL and SDA
configuration.h:
other components:
2.42" OLED Display I2C configured
SD card module
Encoder
Beeper
The SD module is wired to AUX 3 on Ramps
Encoder and Beeper like REPRAP_DISCOUNT_SMART_CONTROLLER
Display is on SCL and SDA
configuration.h:
#define SDSUPPORT #define REPRAP_DISCOUNT_SMART_CONTROLLER #define U8GLIB_SSD1306
|
Re: DIY Tiny OLED I2C full graphics controller October 09, 2015 10:52AM |
How come mine looks like this:
[drive.google.com]
EDIT:
i found the problem myself.
it was a driver issue ( i was having a driver SH1106 and not SSD1306)
Edited 1 time(s). Last edit at 10/09/2015 02:31PM by TRoager.
[drive.google.com]
EDIT:
i found the problem myself.
it was a driver issue ( i was having a driver SH1106 and not SSD1306)
Edited 1 time(s). Last edit at 10/09/2015 02:31PM by TRoager.
|
Re: DIY Tiny OLED I2C full graphics controller November 06, 2015 12:44PM |
TinyOLED V1.2 Module 128x64 for RAMPS
• 128x64 pixel 1.3" I2C OLED / 0.96" I2C OLED (Detachable)
• TinyOLED V1.2 Connector Board (Custom Design : 45mm x 37mm)
• TF Card Module (Offline Printing, Detachable)
• Rotary Encoder (User Control)
• BlueTooth HC-05 Module (Wireless Connection - short range, Detachable)
• ESP8266-01 WIFI Module (Wifi Connection - long range, Deachable)
•Change Bitmap to OLED with LCD Bitmap converter
[forums.reprap.org]
[ati-soft.biz]
[www.HKMakers.hk]
Edited 3 time(s). Last edit at 11/06/2015 12:57PM by fredchan.
• 128x64 pixel 1.3" I2C OLED / 0.96" I2C OLED (Detachable)
• TinyOLED V1.2 Connector Board (Custom Design : 45mm x 37mm)
• TF Card Module (Offline Printing, Detachable)
• Rotary Encoder (User Control)
• BlueTooth HC-05 Module (Wireless Connection - short range, Detachable)
• ESP8266-01 WIFI Module (Wifi Connection - long range, Deachable)
•Change Bitmap to OLED with LCD Bitmap converter
[forums.reprap.org]
[ati-soft.biz]
[www.HKMakers.hk]
Edited 3 time(s). Last edit at 11/06/2015 12:57PM by fredchan.
|
Re: DIY Tiny OLED I2C full graphics controller December 02, 2015 12:59AM |
Have to agree on the shipping cost argument! Seems like shipping fee goes up alon with the shopping cart and not due to actual costs?Quote
Skimmy
visited your store, can't put things in cart with Safari, changed to chrome, put whole Displayassembly in cart, proceeded to checkout, saw 34€ shippingfee and no option to change this, closed chrome. I'm lazy and for sure would have paid 30€-40€ in total. But not 70€. Your shipping fee for such small things is ridiculous. And your store doesn't work with Safari.
I bought the first DIY 1,3" OLED and been very happy (somewhat) using it
But shipping is silly... many/most asian sellers can sell for free, or at least not over $10 for such light items.Somewhat = Has to use marlin RC to make it Work. It does not Work in latest stable Marlin.. unfortunately the Auto-level in RC makes my printer move very slowly... so for now I have no display.
Any way to make this Work in latest stable version of Marlin
My Instructables - both total newbie instructables and some for intermediate users.
My Designs on Thingiverse
YouTube channel containing a few 3D printing videos - they are videos for my Instructables, and mostly not standalone.
Ultius / Tantillus Thingiverse Group
|
Re: DIY Tiny OLED I2C full graphics controller December 14, 2015 01:07AM |
Thanks for the commets, I will try the lastest Marlin out with this TinyOLED,
BTW, the shipping charges is set wrongly and fixed, because I need to setup shipping charges for the Tinyboy 3D Printer Extended with weight is 4KG
!!! :p:
[github.com]
// SSD1306 OLED generic display support
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: [code.google.com]
#define U8GLIB_SSD1306
--------------------------------------------------------------------------------------------------------------------------------------------------------
#elif defined(SSD1306_OLED_I2C_CONTROLLER) || defined(SH1106_OLED_I2C_CONTROLLER)
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define BEEPER 37
#define LCD_SDSS 53
#define SDCARDDETECT -1
#define KILL_PIN -1
#elif defined(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
Edited 6 time(s). Last edit at 12/15/2015 11:15PM by fredchan.
BTW, the shipping charges is set wrongly and fixed, because I need to setup shipping charges for the Tinyboy 3D Printer Extended with weight is 4KG
!!! :p:
[github.com]
// SSD1306 OLED generic display support
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: [code.google.com]
#define U8GLIB_SSD1306
--------------------------------------------------------------------------------------------------------------------------------------------------------
#elif defined(SSD1306_OLED_I2C_CONTROLLER) || defined(SH1106_OLED_I2C_CONTROLLER)
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define BEEPER 37
#define LCD_SDSS 53
#define SDCARDDETECT -1
#define KILL_PIN -1
#elif defined(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
Edited 6 time(s). Last edit at 12/15/2015 11:15PM by fredchan.
|
Re: DIY Tiny OLED I2C full graphics controller January 15, 2016 10:57AM |
Kimbra creates MarlinKimbra4due
[github.com]
it works with any controller board which have serial interface b'cos it's using text character as command to instruct hmi lcd for display
Edited 3 time(s). Last edit at 01/15/2016 11:49AM by fredchan.
[github.com]
it works with any controller board which have serial interface b'cos it's using text character as command to instruct hmi lcd for display
Edited 3 time(s). Last edit at 01/15/2016 11:49AM by fredchan.
|
Re: DIY Tiny OLED I2C full graphics controller January 21, 2016 12:23PM |
Hi,
Why my lcd display is two color?
Thanks for help.
Why my lcd display is two color?
Thanks for help.
|
Re: DIY Tiny OLED I2C full graphics controller March 22, 2016 08:40AM |
I just printed this and there is no way the PCB can fit in there (I bought mine from [www.hkmakers.hk])Quote
enif
I have now made a slightly larger version of the PCB which leaves even with the 1.3" display some gap towards the rotary encoder, which is needed for building a nice frame around the tinyOLED controller:
And also I have now created frames for both sizes of the tinyOLED, based on the above PCB version, which I have put on thingiverse:
The display is a very snug fit, but the casing is 3-5mm too close to the Rotary knob for the PCB to fit in there.
My Instructables - both total newbie instructables and some for intermediate users.
My Designs on Thingiverse
YouTube channel containing a few 3D printing videos - they are videos for my Instructables, and mostly not standalone.
Ultius / Tantillus Thingiverse Group
|
Re: DIY Tiny OLED I2C full graphics controller March 23, 2016 03:43AM |
Thank you for you links fredchanQuote
fredchan
TinyOLED V1.0 for RAMPS
[www.thingiverse.com]
TinyOLED V1.2 for RAMPS
[www.thingiverse.com]
TinyOLEd V1.2 on TinyBoy 3D Printer Extended
[www.youtube.com]
TinyOLEd V1.2 on TinyBoy 3D Printer Extended using DC12V
[www.youtube.com]
you can make a case box easily with www.Tinkercad.com
I know how to make items, but it is far less timeconsuming if it is allready made. Seems V1 is not a fit at all. Wodner if the 1.2 fit for hkmakers 1.3" pcb... as mine is Square.
Edit: I rather like the box-style due to the very fiddly natur of the OLED + PCB + SDreader sandwhich
Edited 4 time(s). Last edit at 03/23/2016 03:47AM by dintid.
My Instructables - both total newbie instructables and some for intermediate users.
My Designs on Thingiverse
YouTube channel containing a few 3D printing videos - they are videos for my Instructables, and mostly not standalone.
Ultius / Tantillus Thingiverse Group
Sorry, only registered users may post in this forum.