Anet A8 bad/inconsistant extrusion after changing nozzle May 02, 2018 05:22PM |
Registered: 6 years ago Posts: 5 |
Re: Anet A8 bad/inconsistant extrusion after changing nozzle May 02, 2018 06:22PM |
Registered: 6 years ago Posts: 27 |
Re: Anet A8 bad/inconsistant extrusion after changing nozzle May 03, 2018 03:55AM |
Registered: 6 years ago Posts: 5 |
Re: Anet A8 bad/inconsistant extrusion after changing nozzle May 03, 2018 06:24PM |
Registered: 6 years ago Posts: 27 |
Re: Anet A8 bad/inconsistant extrusion after changing nozzle May 04, 2018 04:37AM |
Registered: 6 years ago Posts: 5 |
Re: Anet A8 bad/inconsistant extrusion after changing nozzle May 07, 2018 11:15AM |
Registered: 8 years ago Posts: 318 |
Quote
HugoG
I have checked the filament size if I push it out of the nozzle, and that is 0.42 mm, so not a problem. Right now I don't have another nozzle to put on so I will have to deal with it. My filament is exactly 1.75 mm so that isn't the problem either. I'm kinda running out of options here, so I'm just going to try to change some settings or something.
Re: Anet A8 bad/inconsistant extrusion after changing nozzle May 08, 2018 10:19PM |
Registered: 6 years ago Posts: 27 |