Had problems but worked through them No90 from RS

Chris1965

Had problems but worked through them No90 from RS
December 24, 2013 03:01PM

Registered: 9 years ago
Posts: 10

Had a few problems but nothing that with a little thought and challenge didn't sort out.
Made a sphere in a cube it rotates freely see pictures
Thanks RepRap

Reply Quote

Attachments:
open | download - 20131224_101638.jpg (124.6 KB)
open | download - 20131224_112425.jpg (125.7 KB)
open | download - 20131224_120609.jpg (80.4 KB)

droftarts

Re: Had problems but worked through them No90 from RS
December 25, 2013 04:34PM

Registered: 12 years ago
Posts: 1,611

Hi Chris1965

Looks really nice, thanks for sharing! As you have an early (pre-220) Duet board, see this thread: [forums.reprap.org]

Ian
RepRapPro tech support

Reply Quote

PNut

Re: Had problems but worked through them No90 from RS
December 28, 2013 09:42AM

Registered: 9 years ago
Posts: 5

Nice sphere in a cube Chris1965, can I ask where did you get the gcodes/stl file from?

RS#379

Reply Quote

Chris1965

Re: Had problems but worked through them No90 from RS
December 29, 2013 05:06AM

Registered: 9 years ago
Posts: 10

Got the stl file from a site called GrabCAD and used slic3r with Ormerod-0.5 settings with a few small adjustments