Hi! I have to curious problems with my ormerod 2.
It is extruding in bursts, making a sortof spoted patern on the skirt, and making a very bumpy, uneven print. Its like it extrudes, then pauses, the extrudes again, every other second or so. What can be causing this?
The other issue is that it will somtimes offset the print in x and y direction in the middle of the print. If im printing a flat heart for example, it will sometime suddenly start printing the heart offset to the original posistion. The shape will still be right, and the height will be right, but parts of the shape will be in the air. This only happens sometimes, and i cant relly find and method to the madness. Any sugestions?
Thanks in advance, alla help is appreciated