Welcome! Log In Create A New Profile

Advanced

Anyone know where I can get one of these?

Posted by fatesalign 
Anyone know where I can get one of these?
April 29, 2015 01:47PM
Hello everyone. I was wondering if anyone knew somewhere in the states that I could get the wire in the image below. My stepper motor is missing one, and I'm wanting to get it overnighted. If you notice, one end is a 6 pin connector that only uses 4 pins. Thank you for any help.


Re: Anyone know where I can get one of these?
April 29, 2015 01:54PM
Theyre not a common cable.
Theres some info here from my search for the motor connectors.
[forums.reprap.org]

Gordon


Gordon
Currently have a tweaked mendel prusa i2
About to build a P3Steel.
[scratchpad.thisandthose.org]

Printer for hire.
[www.3dhubs.com]

Member of South London Makerspace:
[southlondonmakerspace.org]
Re: Anyone know where I can get one of these?
April 29, 2015 02:05PM
I appreciate it. That is it I believe, but I have no clue on how to actually crimp and attach the wires. This is looking like I'm going to have to get them from China and just wait sad smiley lol.
Re: Anyone know where I can get one of these?
April 29, 2015 02:07PM
And for future reference E3D do ready made ones at 1200 mm long for £1.50 each

Motor cables

HTH

Doug

Sorry posted in wrong Thread

Edited 1 time(s). Last edit at 04/29/2015 02:10PM by dougal1957.
Re: Anyone know where I can get one of these?
April 29, 2015 02:13PM
Quote
dougal1957
And for future reference E3D do ready made ones at 1200 mm long for £1.50 each

Motor cables

HTH

Doug

Sorry posted in wrong Thread

That's them! Do you know of a US distributor by any chance? Thank you btw!
Re: Anyone know where I can get one of these?
April 29, 2015 03:08PM
[www.filastruder.com]

I don't see it on their website though. Pretty good service so you might want to contact them.
Re: Anyone know where I can get one of these?
April 29, 2015 03:34PM
Quote
dbrewski
[www.filastruder.com]

I don't see it on their website though. Pretty good service so you might want to contact them.
Ya I checked their site, but I went ahead and emailed them. I'd get it from really any electronics store, but I just can't find any. In america that carries it sad smiley

Edited 1 time(s). Last edit at 04/29/2015 04:01PM by fatesalign.
Re: Anyone know where I can get one of these?
April 29, 2015 10:29PM
buy from china and get a lot of spares, I am still waiting for mine but I got enough for like 3 printers lol
Re: Anyone know where I can get one of these?
June 15, 2018 12:14AM
I've seen cable like that at micro center. They are a big enough chain that they should have an outlet near you. The local branch here in Michigan caters to modders, reprappers, and arduino buffs so they get a lot of weird stuff, and the stuff they do have changes fairly rapidly. Best of luck!
VDX
Re: Anyone know where I can get one of these?
June 15, 2018 02:42AM
... when no crimping tool at hand, I'm bending the "flags" with a small pliers around the cable and soldering the free end to ensure good contact - so no real problem to make them DIY ...


Viktor
Re: Anyone know where I can get one of these?
June 15, 2018 04:11AM
I got mine from reprapchampion.com, now re-opened as gulfcoast-robotics.com...HERE

I haven't bought from them since they re-opened, but have many decent things from the former store.
They carry the best V6 clone I've ever used, hands down. I have two.

Edited 1 time(s). Last edit at 06/15/2018 04:18AM by Diggrr.
Re: Anyone know where I can get one of these?
June 15, 2018 07:01AM
I purchase mine from E-Bay
[www.ebay.com]
Sorry, only registered users may post in this forum.

Click here to login