Reversing a CoreXY axis in firmware December 19, 2020 07:46PM |
Registered: 3 years ago Posts: 5 |
//#define USE_XMIN_PLUG //#define USE_YMIN_PLUG #define USE_XMAX_PLUG #define USE_YMAX_PLUG #define INVERT_X_DIR false #define INVERT_Y_DIR true #define X_HOME_DIR 1 #define Y_HOME_DIR 1
Re: Reversing a CoreXY axis in firmware December 19, 2020 08:23PM |
Admin Registered: 13 years ago Posts: 7,004 |
Re: Reversing a CoreXY axis in firmware December 19, 2020 09:05PM |
Registered: 3 years ago Posts: 5 |
Quote
Dust
Also I was just starting the process of mapping out the pins pins ender 6, any chance you could add what you know for sure to [docs.google.com]
I was suspecting it is close to a v.4.2.2, but have not done anything other than step and direction and enable so far.
Re: Reversing a CoreXY axis in firmware December 19, 2020 10:49PM |
Registered: 3 years ago Posts: 5 |
Quote
Dust
One combination that most who are new to Core XY don't realise is that you may have to swap X and Y pins (ie effectively you have to swap X and Y stepper motors, but without unplugging )
Re: Reversing a CoreXY axis in firmware April 29, 2021 12:57PM |
Registered: 2 years ago Posts: 1 |
Quote
Dust
One combination that most who are new to Core XY don't realise is that you may have to swap X and Y pins (ie effectively you have to swap X and Y stepper motors, but without unplugging )
Re: Reversing a CoreXY axis in firmware April 29, 2021 08:11PM |
Admin Registered: 13 years ago Posts: 7,004 |