ABL final calibration, missing menu items, and more confusion January 15, 2021 12:28AM |
Registered: 3 years ago Posts: 3 |
Re: ABL final calibration, missing menu items, and more confusion January 15, 2021 01:46AM |
Admin Registered: 13 years ago Posts: 7,005 |
elif defined(LEFT_PROBE_BED_POSITION) #error "LEFT_PROBE_BED_POSITION has been replaced by MIN_PROBE_EDGE_LEFT. Please update your configuration." #elif defined(RIGHT_PROBE_BED_POSITION) #error "RIGHT_PROBE_BED_POSITION has been replaced by MIN_PROBE_EDGE_RIGHT. Please update your configuration." #elif defined(FRONT_PROBE_BED_POSITION) #error "FRONT_PROBE_BED_POSITION has been replaced by MIN_PROBE_EDGE_FRONT. Please update your configuration." #elif defined(BACK_PROBE_BED_POSITION) #error "BACK_PROBE_BED_POSITION has been replaced by MIN_PROBE_EDGE_BACK. Please update your configuration. #elif defined(MIN_PROBE_EDGE) #error "MIN_PROBE_EDGE is now called PROBING_MARGIN. Please update your configuration."
#elif defined(MIN_PROBE_EDGE_LEFT) #error "MIN_PROBE_EDGE_LEFT is now called PROBING_MARGIN_LEFT. Please update your configuration." #elif defined(MIN_PROBE_EDGE_RIGHT) #error "MIN_PROBE_EDGE_RIGHT is now called PROBING_MARGIN_RIGHT. Please update your configuration." #elif defined(MIN_PROBE_EDGE_FRONT) #error "MIN_PROBE_EDGE_FRONT is now called PROBING_MARGIN_FRONT. Please update your configuration." #elif defined(MIN_PROBE_EDGE_BACK) #error "MIN_PROBE_EDGE_BACK is now called PROBING_MARGIN_BACK. Please update your configuration."
Re: ABL final calibration, missing menu items, and more confusion January 15, 2021 03:01AM |
Admin Registered: 13 years ago Posts: 7,005 |
Re: ABL final calibration, missing menu items, and more confusion January 15, 2021 03:26AM |
Registered: 3 years ago Posts: 3 |
Re: ABL final calibration, missing menu items, and more confusion January 15, 2021 04:11AM |
Admin Registered: 13 years ago Posts: 7,005 |
Re: ABL final calibration, missing menu items, and more confusion January 16, 2021 01:10PM |
Registered: 3 years ago Posts: 3 |
Quote
Dust
You have DWIN_CREALITY_LCD enabled.
This is a smart screen, it is its own little controller and has its own firmware. Marlin just talks a serial protocol to it, along the lines of display screen_2, wait for click...
Unfortunately at this time it lacks several features.
These must be added into the LCD and marlin...