Wow, I feel like such a dunce. That was the issue, i read it as 5v+ and 11v+ instead of 5a+ and 11a+. I dont care to admit how many hours have been wasted on such a simple issue. Thank you both so much for your help. I can finaly get my printer up and running!by nubspera - RAMPS Electronics
Interesting. That makes sense, but the problem i run into is finding the source of the problem. The metrics from the power source read 5.22 volts and 12.43 volts. I'm wondering if that means that somewhere between the power input and the Vmot there is an issue, or if the issue might be that i dont have a hefty enough wire going from my power supply to the ramps board. Do you have any ideas whby nubspera - RAMPS Electronics
I recently purchases a ramps 1.4 board from Ultimachine but I'm having some troubles getting the stepper motors to turn(or really react to being attached to the board at all) I have loaded the testing script for ramps(http://reprap.org/mediawiki/images/0/0f/RAMPS1.4_TestCode.pde) and i find that all 4 LED's flash like(i think) they should. I also checked the voltage on the x axis pololu, whichby nubspera - RAMPS Electronics
I am just now getting my Prusa up and running and I'm having some issues with the stepper's. I am using the MakerBot Gen4 electronics with some steppers i had from another project(Here - except that it is the .9degree step version). At the moment i am utilizing ReplicatorG to interface with the board. The problem i am running into is that the steppers will not run continuously. Usually, wheby nubspera - General