rhmorrison Wrote: ------------------------------------------------------- > Where can I get the STL files for those figures? > > I have a colleague at work that would love to have > some of these. > He is a super South Park fan. Send me your email on rt@gadgets3d.comby RAF - Look what I made!
New staff came to our office We printed the figures guys from South Parkby RAF - Look what I made!
We made this models, but still require some improvements. Models was printed on Zortrax M200. Material: Z-ABS, Layer: 150 and 50 microns.by RAF - Look what I made!
Hello, Today we have reached the PLA spools. There are 3 colors: Atomic Green Green Bronze Goldby RAF - For Sale
We printed and painted a some Champions from LOLby RAF - Look what I made!
Summer is in full swing and we are working hard. Changes are constantly being made around us, and so we would like to share with you a few interesting pieces of information from the G3D Garage! 1. First of all, we are glad to inform you that we have launched our second store in Poland. From here we will send shipments to all of our European customers. The store is available at www.gadgets3d.euby RAF - For Sale
Hello, We want to show our MendelMax RepRap 3D Printer, which is building with 60% original parts and 40% modified parts Genereal guidelines: Electronics: - RAMPS 1.4 with G3D stepper drivers (1/128) - LCD panel + G3D Shield - HeatBed MK2a - power supply 12V/30A Mechanical: - Timing belts and pulleys GT2 - anodized aluminium profiles - printing ABS parts - G3D Hotend - stepper motors NEMA17by RAF - General Mendel Topics
Gerard Choinka Wrote: ------------------------------------------------------- > Nice design, the opening for the reset button is > a little small, it should be wide enough for a > fingertip Hello Gerard, We will make two version one as you will saw on picture with hole on the screwdriver, and the second one with more big hole on the finger. I think that we also can make some small buby RAF - Look what I made!
Hello, I would like to show you a new RAMPS Case project, Now we just started test it and we want make a few version this case. What do you think? Any suggestions are welcome Alpha version: Part 1 of 2: Version which will be available: - for RAMPS (USB version) - for RAMPS + SD Ramps - for RAMPS + LCD Shield Within a few days we will should add the first versions for downloby RAF - Look what I made!
Hello, Today we added a new RepRap Starter Sets for all who want to start a build RepRap 3D printers! RAMPS 1.4 MINI SET RAMPS 1.4 COMPLETE SET RAMPS 1.4 ULTRA SET RAMPS 1.4 MEGA SET Visit us: Online store: www.gadgets3d.com eBay: GADGETS3D eBay auctions Best Regards RAFby RAF - For Sale
@Eros - thanks for info. We will check it soonby RAF - For Sale
@jebba - All will be available soon. We want to make one small change more, I need to wait on new parts and test it. @Sound - temperature is not a problem for this acrylic, but there is one but, required is cooler fan. I'm not satisfied in 100%, and we changed materials in some parts (because some people not used cooler fan) - now we are waiting on new parts from factory and finally test it Beby RAF - For Sale
It is based on the Budaschnozzle 1.1 design by Lulzbot, which is currently the BEST hotend on the market for RepRap 3D Printers (MendelMax, Prusa, Rostock) and the various 3D printers. The wood parts was replacement on special arcylic parts. Hole for heater was rebuild and we put a high quality ceramic heater (diameter 6mm/0,24inch), also was added the additional hole on the small hex screw whichby RAF - For Sale
Hello, The new products are available in our shop! Timing GT2 Belts and Pulleys for RepRap Prusa 2 - Timing GT2 Belts and Pulleys for Rostock -by RAF - For Sale
If motor (or you) is not happy with this (fully CCW) then turing trimpot CW you can go back to the default Poplolu/StepStick 10K or even 30K as you wants to - it is fun, flexibility and more control over the driver without messing with resistor soldering. Regards.by RAF - For Sale
Early version of page is ready:by RAF - For Sale
Second trimpot turned fully counterclockwise is just a 0Ω For you it doesn't make sense but allegro datasheet explaining this clearly: "By pulling the ROSC pin to ground, mixed decay is set to be active 100% of the time, for both rising and falling currents, and prevents missed steps as shown in figure 3. If this is not an issue, it is recommended that automatically-selected mixed decay beby RAF - For Sale
bobc Wrote: ------------------------------------------------------- > RAF Wrote: > -------------------------------------------------- > ----- > > Sublime Wrote: > > > -------------------------------------------------- > > > ----- > > > You sure have a lot of opensource logos but > no > > > access to the source files for these drivers. > &gby RAF - For Sale
Sublime Wrote: ------------------------------------------------------- > You sure have a lot of opensource logos but no > access to the source files for these drivers. The files will be available when we finish the sale of the first batch. Best Regards, Rafal GADGETS3Dby RAF - For Sale
Hello! We want to present you a new version of A4988 G3D stepper drivers for your 3D printers 4 pcs of professionally manufactured A4988 G3D Drivers complete soldered with mounted heatsinks - tested before shipping, just plug and play. Original Allegro A4988 inside. Professional design and manufacture ensure stable operation of our driver - it contain double copper PCB for better heat dissiby RAF - For Sale
Hello! Today we would like to offer two new items in our store. 1. RAMPS 1.4 ULTRA PACK Kit includes: 1x Complete set of RAMPS 1.4 electronics: - 1x Complete soldered RAMPS 1.4 - 5x A4988 Complete soldered G3D driver with additional OSC trimpot (this is much better than StepStick or Pololu due of selectable off-time) - 1x Mega 2560 - 1x Cooler Fan - 14 cables (complete wiring cables set): *by RAF - For Sale
Hello, The new products are available in our shop! Heatbed MK2a - Mechanical Endstop v1.2 - Best Regards, Rafal GADGETS3Dby RAF - For Sale
You can put on the drivers some fan cooler, this should help for this hot driver/s. Best Regards, Rafalby RAF - General
Hello, We are not produce or soldered this Arduino board (all Arduino which we have was bought from 3rd part), we not written anywhere that this Arduino is ORIGINAL GENUINE ARDUINO. This board is only addon to RAMPS which we sell. We tested many Arduino boards, with graphic, design, brand etc. and this one which customer gets from us working without any problems. Some time ago my firend boughtby RAF - RAMPS Electronics
Hello Lodorenos, Thank you very much for your feedback. I am glad that you are happy. Regarding MFR1100 MFR500 and unfortunately we can not find at the moment, more relevant boxes, some are too small for the second are much too big But I think that soon we will find the right solution. BTW: Good luck in building your RepRap! Best Regards, Rafal GADGETS3Dby RAF - For Sale
Hello, Today we added a 3D model all parts (STP files) Additional links: RepRap Wiki GADGETS3D forum 3D Print development tracker More cool innovation upgrades will coming soon Best Regards, Rafal GADGETS3Dby RAF - For Sale
Design files and full description is now here: Best Regards, Rafal GADGETS3Dby RAF - For Sale
Hello, New promotions: - RAMPS 1.4 electronics with SDRamps 49,00 USD (RAMPS 1.4, SDRamps, cables set (14pcs) - - Complete set of RAMPS 1.4 electronics (FULL SET) 135,00 USD (RAMP 1.4, Arduino Mega 2560, 5x StepSrick drivers, SDRamps, cables set (14pcs) - All is in nice and safety box: Best Regards, Rafal GADGETS3Dby RAF - For Sale
Hello, Everything should be on Wikipedia in the next few days, just now if someone ordered it we are glad to share connectors diagrams and schematics, shield and panel was done in Altium EDA so we need to find a time first to move it into eagle. Best Regards, Rafal GADGETS3Dby RAF - General
Hello, Everything should be on Wikipedia in the next few days, just now if someone ordered it we are glad to share connectors diagrams and schematics, shield and panel was done in Altium EDA so we need to find a time first to move it into eagle. Best Regards, Rafal GADGETS3Dby RAF - For Sale