I've got me myself a little problem with my RAMPS 1.4 runinng Marlin-1.0.2-1 and 2004 LCD Intelligent Smart Controller (RepRapDiscount Smartcontroller, this one ebay) can get it to display temp etc. but do i use the button, the display gets weird , youtube it is a hardware problem with the encoder, or a software problem?by FintaruS - RAMPS Electronics
Hello. hope you can help me a little. I would like my Arduino to take power from the power supply instead of through USB, I use a RAMPS 1.4. I understand I need to put a diode D1, but only has a 1N4005, not a 1N4004 as it says on RAMPS_1.4. can I still use the 4005 or should they be the same, and it's okay to use two different?by FintaruS - RAMPS Electronics
if i set the temp to 217c (178c - 180c) its fine and stable, if i set it to 218c on the order hand, it gos unstable and jumps around 215c - 231c ( 176c - 186c)by FintaruS - Reprappers
okay, the multimeter prob, could be at a beder plads. i fixd that now. set temp to 210 it shows 190 and is stabel, set temp to 215 it shows 196 and is stabel, And than it gets unstabel Set temp to 220, multimeter jumps from 190 - 206 Pronterface shows 215 - 234 Set temp to 230, multimeter jumps from 190 - 210 Pronterface shows 216 - 254 Set temp to 235, multimeter jumps from 191 - 205 Pronteby FintaruS - Reprappers
Hi all, i hope there is a simpel fix for my problem. i finally got all my axis and extruder calibreted and they are traveling the right distance (that only tog a few weeks, me being dyslexic and all). My problem now is, that the temperature is way off, it starts out at rum temp about 25-30C, then i set the hotend to go op to 180c, its starts heading, it thinks that it got it at 180c, men realy itby FintaruS - Reprappers
Hey all. I have finally decided to make me a RepRap, but just a few questions, I hope you can help me find answers to. I'm going goning for the RAMPS, but i'm somewhat in doubt about what to choose Pololu A498 or Pololu A4983 , to me, there seems to be no big difference, what shell I choose, is there a difference, and what is the impact? stepper motor, I'm thining to uses NEMA 17, but what doeby FintaruS - Controllers