Fellas! This is Alejandro, founder of Selva3D: A project that helps transforming 2D images into 3D models. After moths of hard work I'm very happy to pre release the new version. that lets you emboss or engrave your transformed images into existing objects! I'd love to hear your feedback in the comments below. I want Selva to be as useful for you as it can be. And as a git for being so suppoby loskiorama - 3D Design tools
As far as I know the best way to do this is using www.selva3d.com Its easy, automatic and freeby loskiorama - 3D Design tools
Thank you very much for your help guys. But I belive I didn't made myself clear. I'm not using the graphical user interface but the COMMAND LINE oepnscad.exe "C:\Users\ale\iphone6Dec"scad -o "C:\Users\iphone6Dec_tdg2hliiF1_View.png" --camea=0,0,0,0,0,0,200 --imgsize=188,368 Now after exceuting this i get this result. I want the yellowish to be white on the COMMAND LINE exportby loskiorama - OpenSCAD
I'm using the command line export to PNG option. and I'd like the background color to be white on the exported images insted of the yelowwish that comes by default. How could I do this? Best!by loskiorama - OpenSCAD
Estimados, Quería saber si uds podrían arrendarme una impresora 3D de tipo prusa por 4 días en Madrid Saludosby loskiorama - RepRap User Group España
Thanks so much for the feedback! 1)Web app so you dont have to bother downloading even more stuff (slicer,host,etc,etc) 2)Thresholds: You are very right! as of now I'm developing the UI to set all parameters for the user to control the transformationby loskiorama - General
Hey guys! www.selva3d.com is an application (still on beta) that I'm developing to transform images into STL files. I've used it several times for my clients and because reprap is about sharing I put it online so you can use it as well. Feedback or any comments are appreciatedby loskiorama - General
Hey guys! I'm implementing my own M93 command I'm executing the Gcode sentence "M93 X" being X an integer. For some reason when I run this, code_value() instead of reading "X" reads "93" (from the M93) What is it that I'm doing wrong? Thanks!!by loskiorama - Firmware - mainstream and related support
That is very reveling...but I think I fried my driver by checking it current. It could be possible. How could I test if it's dead?by loskiorama - Smart_Rap
How could I check that? I set my driver potentiometer to the maximum and still facing the same issueby loskiorama - Smart_Rap
You mean changing the inner ptfe tube from inside the jhead?by loskiorama - Plastic Extruder Working Group
hey guys! I have a nasty issue with my Z motor when homing Z for autoleveling.without servo. When the Z enstop is proving the bed after clicking for the first time it raises so fast that at the middle of this raising movement the motor can't cope up with the speed and starts vibrating but wont raise the plate. Tweaking the firmware I managed to prevent this by lowering DEFAULT_MAX_ACCELERATION toby loskiorama - Smart_Rap
Simple question. I accidentally bought several 3.0 mm hotends and I have tons of 1.75 mm filament. Do you think I'll face any problem if I try to extrude the filament with this setup Thanks!by loskiorama - Plastic Extruder Working Group
The POWER IN is ok (It gives 11.6V) on both ramps power input terminals. How can I test the fuse?by loskiorama - General
Both incoming power connectors read 11.5 voltsby loskiorama - General
Hi folks! I'm having a problem with my heatbed. When I turn it on there is no red led on my ramps/no voltage on D8 (extruder on D10 works just fine). Tested the same ramps with a brand new arduino and I had same problem Do you know what could be the cause of this issue?? Thanks!by loskiorama - General
I was rushing and put all steppers upside down (screw heading to the power input) Now my ramps is not responding very well. When I connect it to my laptop it makes the "usb connected" sound and the "usb disconnected" one right after Did I burnt my stepper drivers? Is there any solution for this? Thanks!!by loskiorama - Stepper Motors, Servo Motors, DC Motors
any urls?by loskiorama - Firmware - mainstream and related support
Hey! I'm trying to tweak Marlin and I'd like to avoid loading the firmware to my Arduino mega every single time I want to test my changes. Is there any way to emulate and arduino/ramps where I could load my code easily and command from Repetier Host for example? Thnaks!!by loskiorama - Firmware - mainstream and related support
Hey guys, I was wondering if there is any way to keep track of the accumulated printing time on any firmware version. Otherwise I could try to develop such functionality so. Do you think it would be interesting to have this feature? Thanks!by loskiorama - Firmware - experimental, borrowed, and future
guys! i discovered what the problem was i had to put the jumpers that go under the pololus. there are 3 jumpers per motor connection Thanks for you help!!by loskiorama - Stepper Motors, Servo Motors, DC Motors
Tried tweaking the flowrate and feedrate without much success. Different sound but same behaviorby loskiorama - Stepper Motors, Servo Motors, DC Motors
Hey guys, I got this arduino mega/ramps/pololu combo from china last week. Put everything together (as every single piece was separate) and tested. The result wasn't very pleasent. I have the same problem with all my motors on that ramps. They make a noise and then (some of them) turn violently when I try to move them using Repetier's manual control interface. I tested the same ramps with a diby loskiorama - Stepper Motors, Servo Motors, DC Motors
hey guys, I'm looking into sourcing my parts from china so I came into this I plan to buy this ramps/mega/drivers combo and this stepper motors My question is if the drivers will be compatible with the motors and what should I check for driver-motor compatibilty? Thanks!by loskiorama - Stepper Motors, Servo Motors, DC Motors