Show all posts by user
původní diskuse
Page 1 of 1 Pages: 1
Results 1 — 6 of 6
It looks really good.. Couple of days ago I bought Titan Aero...
(aluminium foil doesn't help, I need sensor with 8mm detection distance I thing. I have 4mm)
by
pospa
-
General
Thanks for reply.. it's bad for me I needed capacitive sensor only because I have glass on MK3 heatbed, so is the better solution to use inductive sensor with larger distance, then standard 4mm? Or use something else then glass, but I don't know what..
Thanks
by
pospa
-
General
Hello.. is there somebody, who can help me with capacitive sensor "LJC18A3-B-Z/BX"? It's a NPN NO and I don't know how to connect it to RAMPS 1.4 or how can I test it. I have another sensor (Inductive LJ12A3-4-Z/BY) and when I wire it, it work well.But I'm using glass and I need capacitive.. I wired it as I found here: and here:
But unfortunately nothing helps. When I connect it red LED is stil
by
pospa
-
General
Ahoj, chtel bych mit zvlast zdroj pro napajeni desky, aby se rychleji ohrala a take na vice stupnu (s defaultem mi da max. okolo 90 stupnu). Mam 24V zdroj, SSR-25DA, zapojeny to mam urcite spravne (viz mraky obrazku na googlu), dokonce se rele i rozsviti kdyz arduino posle signal (Mega 2560, Ramps 1.4). Ale do desky uz zadne napeti netece. Firmware pouzivam Marlin 1.1.0 RC7 a podle me bude chyba
by
pospa
-
Obecné
T H A N K S !!!!! this exactly the problem... SOLVEEED! Auto leveling is super feature..
by
pospa
-
General Mendel Topics
Hi.. Topic says all.. I have problem with this feature, I made my own solution (with MK8 extruder) with servo and micro switch. After couple of firmware editing and tuning I have auto bed leveling. Before printing I go to home point (G28), then G29 for auto level, then G28 X0 Y0 (If I don't do this, all objects are printed with offset). Print starts, but Z motors only move when changing layer T
by
pospa
-
General Mendel Topics