Show all posts by user
Printing issues ...
Page 1 of 2
Pages: 12
Results 1 — 30 of 58
Well the general rule of thumb when using anything that gives off fumes is to ensure you use it in a well ventilated area.
With that said, if we look at the two plastics mentioned:
PLA
It's a biodegradable polymer.
From my personal experience, it's easy to work with as a beginner material, I've had no ill effects using it in my printer in the lounge room, and it gives off a smell, i can onl
by
Jaramaniac
-
General
I would Have to say Yoda Lite by Faberdasher has been one of my favourites.
there are so many yoda heads around my house atm
by
Jaramaniac
-
General
is it possible for you to upload a photo of your setup, seeing it may greatly help in identifying a potential issue.
-Kind Regards
Jaramanaic
by
Jaramaniac
-
Reprappers
Of Course!
Bridging is essentially the print head, extruding plastic out into open air, from 1 point of built up plastic to the next.
there are a lot of files available on thingiverse to help calibrate this for your printer.
Example
its a combination of getting the correct temperature for the plastic, so that it still extrudes nicely, but will cool shortly after being extruded to prevent it s
by
Jaramaniac
-
General
I Understand what you mean as far as more complicated shapes go, but I have to disagree with your statement that the hollow cube you propose would never work.
It would most definitely work, this is the exact situation where "Bridging" come in.
I know this works because I have been able to print 20mm hollow cubes as test prints with no issues.
as far as making a part hollow to reduce plastic and
by
Jaramaniac
-
General
I remember seeing this model come and go through thingiverse,
maybe someone can clarify this for me, but I thought Games Workshop actually got involved and asked 3dyeti to remove the model, due to it being an exact copy of one of their models.
by
Jaramaniac
-
Look what I made!
Hi Roger, no i didnt need any support for the ears
as it does an entire layer at a time, it just gradually builds out further and further as it goes up.
by
Jaramaniac
-
Look what I made!
richgain Wrote:
-------------------------------------------------------
> My first attempt, also in pink PLA (we're
> obviously quite secure and comfortable with our
> masculinity).
>
> ; generated by Slic3r 0.9.3 on 2012-10-11 at
> 07:10:46
>
> ; layer_height = 0.2
> ; perimeters = 2
> ; solid_layers = 4
> ; fill_density = 0.5
> ; perimeter_speed = 30
> ;
by
Jaramaniac
-
Competitions
Yes Definitely, I am ready for a new challenge
by
Jaramaniac
-
Competitions
Another Awesome Print!
I like it, and I definitely agree with your kids, I see the dinosaur skeleton there
by
Jaramaniac
-
Look what I made!
I believe it should definitely be printable, if not stand alone, then with some support material that just breaks away.
What format do you have it in at the moment?
I have access to a few different programs, i might be able to convert a copy and try.
by
Jaramaniac
-
Let's design something! (I've got an idea ...)
Nodeva Wrote:
-------------------------------------------------------
> No real reason. 0.1693 should have sufficed.
>
> Determined my layer height value by using the
> methodology outlined in RichRap's Guide to Slic3r
> Part 1
>
> I use a 3/8" lead screw with 12 turns per inch of
> travel. Each turn would be 0.0833333 inches of
> travel or 2.1166667 mm. If you divi
by
Jaramaniac
-
Competitions
Alternatively, if you are just looking for a simple option, and are running windows, you could do what i did and download the latest Precompiled version from HERE!
it is also linked to in the windows section of Kliment/Printrun's GitHub page
This gives you a windows executable file, super easy to use.
Also you can do the same thing with Slic3r, they also have a precompiled windows version, all
by
Jaramaniac
-
Reprappers
Thats a Pretty nice Yoda Nodeva!
Your layer height is very specific, any particular reason you went to that many decimal places?
by
Jaramaniac
-
Competitions
Thats Impressive!
Quite a unique Design you have there, is it based on any current designs, or is that your own.
Also what material did you use?
by
Jaramaniac
-
Look what I made!
This is interesting to know as i was planning the same thing on my raspberry pi as well.
I dont have anything super constructive to contribute yet, just wanted to post so i csn find this thread easily later :p
by
Jaramaniac
-
General
I agree with the kit process, having not long finished sourcing and assembling my Prusa Mendel, i have yo say thst i feel much more comfortable with the machine and that troubleshooting is easier as i am more aware of each parts function.
I hadnt seen the ultimakers in action prior to this post though. Those things are crazy fast
by
Jaramaniac
-
General
Not sure if i qualify for entry as a printed off a slightly different version of the yoda bust.
But thought I would through mine in to show it
its the largest print I have done so far with my printer
I do have a slight issue where the top of his head, ears and sholders are not completely filled, but I'm still proud of it.
by
Jaramaniac
-
Competitions
As Promised (and sorry for the delay)
Here is a picture to show the difference just changing the flow rate made.
-Jaramaniac
by
Jaramaniac
-
Printing
Alzibiff Wrote:
-------------------------------------------------------
> Have you checked that your firmware steps per mm
> figure for the extruder match the amount of
> filament which is actually being pushed through?
> You might wish to take a look here :HERE for
> instructions if you are in any doubt.
> Alan
You are bang on the money Alzibiff!!!
I did some research at wor
by
Jaramaniac
-
Printing
UPDATE
So I went hunting for some other posts that might help.
Found:
Printing Issues|Nozzle Dragging
this mentions a couple of good things to check
I am also trying switching to the latest release of Slic3r, and will upgrade my sprinter firmware if available.
Will follow up with results, but still very open to any further advice in the mean time
-Jaramaniac
by
Jaramaniac
-
Printing
Hi Everyone
I have been running prints off for about a week now, and have hit a snag.
I seem to be able to handle smaller items, but larger items present a challenge.
Firstly, it seems that I am feeding too much plastic, and it is building up on the first 3 solid layers.
Secondly it is causing a fairly dramatic shift on the y axis
Hopefully what i mean is visible in the photos.
I have a Pru
by
Jaramaniac
-
Printing
davew_tx Wrote:
-------------------------------------------------------
> Anyone have a link to Julianh7 build blog?
> a search didn't turn up results.
>
> maybe I'm not handy enough to be on here.
Yeah Sorry about that Dave, Curse my spelling .
Dark Alchemist, I know for me when I came to the reprap.org site, I was pulled to the Prusa Mendel, Partly Because it told me it was a g
by
Jaramaniac
-
General
Idolcrasher Wrote:
-------------------------------------------------------
> It is still a bit of a tough hobby to break into.
> Especially since you pr chances of meeting another
> person who does it might be small (depending on
> where you live)
>
> I have been thinking of doing a YouTube video
> breakdown of a simple printer build/setup.
>
> Not sure which printer
by
Jaramaniac
-
General
I find it amazing that you weren't able to locate the information you needed to get started on this site.
I find it more amazing that you believe us interested in feeding a troll
by
Jaramaniac
-
General
Two main excerpts I pulled from the article cover:
"You can make a receiver like Guslick's out of plastic because it houses only the basic mechanical parts of a firearm -- the trigger mechanism, the magazine, and other components. It's the barrel of a gun and/or the firing chamber, both of which you attach to the receiver, that must be strong enough to contain the heat and explosive pressure tha
by
Jaramaniac
-
General
you could check out extrude3d.com, i came across the site while posting about some filament for sale.
They are Aussie based, and have a hotend very similar to the J-Head variety.
I cannot vouch for them tho as I have not purchased anything from them
by
Jaramaniac
-
Wanted
Page 1 of 2
Pages: 12