Show all posts by user
Printing issues ...
Page 1 of 1 Pages: 1
Results 1 — 6 of 6
No, not a jam.
the stepper driving the extruder just locks up for some reson. Does not even die like it would if the driver overheats, just stops moving.
Like it forgets the E comands in the g-code, the motor locks up like any stepper does when it´s plugged in but not moving.
I got it to print one thing yesturday bot when i ran the same thing again the extuder stoped before the first layer wa
by
zarak_0066
-
Printing
Hello everyone!
I have had my printer for a while now.
i built it after summer last year and got it running great! but after updating repetier host during chrismas the extruder just started stopping during prints. i have tried all i can think of to get it to work propperly again, including: reinstalling repetier host, new repetier firmware, shorts, overheating drivers.
Please If anybody have
by
zarak_0066
-
Printing
So this sketch works on my Gen7:
/* YourDuino.com Example Software Sketch
20 character 4 line I2C Display
Backpack Interface labelled "LCM1602 IIC A0 A1 A2"
terry@yourduino.com */
/*-----( Import needed libraries )-----*/
#include // Comes with Arduino IDE
// Get the LCD I2C Library here:
//
// M
by
zarak_0066
-
Repetier
Yes, i have tried without defining them. Didnt work, might be an adress error but the adress that worked with an arduino Uno don't work. I Think i doubled the adress correctly, 0x27*2=0x4e.
I tried all other adresses i could Think of, still did not work.
Zarak_0066
by
zarak_0066
-
Repetier
I am planing to add a i2c lcd to my Gen7 setup. But i only get compile errors when i add the SCL and SDA pin defenitions in pins.h
My code looks as folows:
/****************************************************************************************
* Gen7 1.4.1 pin assignment
*
****************************************************************************************/
#if MOTHERBOARD == 71
#define K
by
zarak_0066
-
Repetier
Hello everyone!
So, im building a 3d printer and decided to go with the Gen7 board for the electronincs. Now that im almost done with it, i can´t get the x-axis motor to work.
I have tried everything i can think of to find where the problem lies.
I have: Cheked the wiring for shorts.
switched the wires around like crazy.
tried a differnt Pololu.
tried another motor.
checked for shorts on the g
by
zarak_0066
-
Controllers