Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 30 of 30
Hello
I have troubles with the M600 filament change function.
After reload filament, i clean the nozzle to be pretty clean. If it looks well, i press continue and the nozzle will resume to the last print position. When the nozzle go down to the object, it take a short time and extrude a little bit material. after this, the noozle work great.
I'm not happy with this little cloth on the printbed
by
jumbo125
-
Firmware - Marlin
@Dust
Okay. Thank you! I thought it is some like this...
So i changed it for a few days and now it works. :-)
i hope there is no other problem, when i changed the code.
I changed in the pause.cpp:
// Wait for the heaters to reach the target temperatures
ensure_safe_temperature(false);
// Show the prompt to continue
//show_continue_prompt(is_reload); //disable by jumbo125
by
jumbo125
-
Firmware - Marlin
Does somebody knows the process behind this code?
TERN_(HOST_PROMPT_SUPPORT, host_prompt_do(PROMPT_USER_CONTINUE, GET_TEXT(MSG_REHEATDONE), CONTINUE_STR));
//TERN_(EXTENSIBLE_UI, ExtUInUserConfirmRequired_P(GET_TEXT(MSG_REHEATDONE)));
Does it o my show the continue button on display?
by
jumbo125
-
Firmware - Marlin
Did it.
disable
#if M600_PURGE_MORE_RESUMABLE
in pause.cpp does the trick. know it works.
Last fail on the park/runout procedure
After reload filament, I press continue to load the new filament, the printer do his job.
But, if I need more time and the nozzle turn off, I can't do finish the print...
Problem:
I press continue, but the printer don't load the filament, because nozzle is cold. Tha
by
jumbo125
-
Firmware - Marlin
Quoterq3
I believe you have to invert the run-out sensor in configuration.h:
#define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present.
I had to do this for my Anycubic delta.
I changed it. Did not help!
I check the state of endstops. Its correct wenn i use "HIGH"
if i use "HIGH" and no filament is in the sensor, i get callback "open"
by
jumbo125
-
Firmware - Marlin
Hy
i config. my config.h and config.adh files for my anycubic i3 mega.
I have a problem with Filament Runout: M600
After relaod the filament, the printer stop and do nothing. on the lcd isn'T any continue button, only pause and stop
here my steps:
Runout triggerd:
1. automatically unload filament
2. on the display appears "Conitnue" Button and Pause bottun disapper
3. on Continue the printer l
by
jumbo125
-
Firmware - Marlin
I use marlin for my Ender.
Now i want create a new version for my Anycubic i3 Mega. It works, but the movement/travel from XY is very slow, when i go to the next probe_point.
Homing works great.
Only the probe_manually not work.
Thank you for your answer
Steps to Reproduce:
Disalbe Auto_bed_
set up XY_PROBE_FEEDRATE (100*60) higher
set HOMING_FEEDRATE_MM_M higher
disable AUTO_BED_LEVELING_BILIN
by
jumbo125
-
Firmware - Marlin
Hab nun die aktuelle bugix 2.0 runtergeladen. Das Manöver vom Beginn der parkposition zum Druckobjekt funktioniert plötzlich......
by
jumbo125
-
Software
Ich habe nun einige male Änderungen vorgenommen, doch es hat nicht wirklich geholfen....
Wenn die Noozle von der Parkingstation wegfährt, beginnt auch schon der Extruder zu fördern....
was mich aber am meisten ärgert:
ich kann bei der Unload_length einstellen was ich will, es werden immer zu viel entladen. Der extruder schiebt noch weiter zurück, obwohl gar kein filament drinnen ist...
ich habe
by
jumbo125
-
Software
QuoteAlterBastler
Unload_Length und Fast_Load_Length sind auch anders (unterscheiden sich auch um 10cm).
Gibt es dafür einen bestimmten Grund?
Herzl, Grüße
Danke. Werde ich korrigieren.
by
jumbo125
-
Software
das war auf 0. hab es gerade zuvor auf -1 umgeschrieben. das war aber die einzige Änderung...
by
jumbo125
-
Software
it's really strange...... the Filament change function is also a little bit confused....
The noozle goes to park-position
after a few minutes the LCD shows heat noozle -> i'll do this.
Load Filament -> i accept
all works very fine!
After load Filament i click continue on the LCD
The noozle goes back to the last print-position
NOW it will be confused..... The noozle start the printing, Exac
by
jumbo125
-
Firmware - Marlin
okay. danke. ich dachte schon meine Frage wäre euch zu lächerlich....
by
jumbo125
-
Software
ist die Frage so ungewöhnlich oder die Antwort so kompliziert.... Langsam zweifle ich an mir und meiner frage....
by
jumbo125
-
Software
Is the question so difficult or did I wrote so confused...?
by
jumbo125
-
Firmware - Marlin
Hallo zusammen
ich habe ein Problem mit meiner Marlin Firmware. Es geht um den Run-out sensor, sowie den damit verbundenen M600 Code.
Prinzipiell klappt alles, außer der Funktionsablauf, wenn das Filament zu ende ist und der Sensor auslöst.
Folgender Ablauf:
1. Der Sensor merkt, ende des Filaments
2. Die Düse geht zur Park-Position
3. Am Display erscheint nach einigen sekunden: Düse heizen -->
by
jumbo125
-
Software
Hello
I use Marlin 2.0.7 and it works great for me, BUT
If my printer detect runout of filament, it do some confused steps.....
this is the procedere:
1. End of Filament, the filament detector check Runout.
2. The noozl go to park position
3. On the LCD display can i chosse "Heat noozle"
4. Then Load filament.
-----All functions work great
5. On the display are two options: Purge more filament o
by
jumbo125
-
Firmware - Marlin
Hallo zusammen
Ich besitze einen Anycubic i3 mega und nutze diesen mit Marlin 2.x
Ich bin wirklich sehr begeistert davon, vorallem die mesh bed level funktion war sehr hilfreich, da mein Bett schon etwas "unwuchtig" ist....
Nun habe ich mir vor einigen Tagen einen Ender 3 Max gekauft und bekomme den bald geliefert. Nun bin ich am zusammensammeln diverser Software/Firmware Infos...
Gibt es für d
by
jumbo125
-
Software
Hello experts!
Sorry to consult the forum again. I created a new topic, because the last topic hasn't the same problem.
I only would to know:
What is the correct Connection type for the anycubic i3 mega?
#define SDCARD_CONNECTION LCD
#define SDCARD_CONNECTION ONBOARD
I use the sdcard_connection_lcd, because i can open the special menu without sd-card insert.
But, is it the correct type? Wh
by
jumbo125
-
Firmware - Marlin
Okay. I see. Thank you
I tried to change some settings in the configuration.adv.
Do you know, which type i should use for the anycubic i3 mega?
Choice:
#define SDCARD_CONNECTION LCD
#define SDCARD_CONNECTION ONBOARD
by
jumbo125
-
Firmware - Marlin
Hello
does anybody knows how i can add a button to the lcd menu of the anycubic i3 mega?
I tried to enable the custom user menu
#define CUSTOM_USER_MENUS
#if ENABLED(CUSTOM_USER_MENUS)
#define USER_SCRIPT_DONE "M117 User Script Done"
#define USER_SCRIPT_AUDIBLE_FEEDBACK
//#define USER_SCRIPT_RETURN // Return to status screen after a script
#define USER_DESC_1 "Do the trick"
#defin
by
jumbo125
-
Firmware - Marlin
Hello member
I flashed my 3d printer with the Marlin 2.0.6 firmware. After the installation all the feature worked fine, BUT:
If i remove the sd-card and plug it again, the printer doesn't show the files. I need to restart the printer.
If i press the refresh butoon, nothing happend.
I viewed this in the terminal too.
If i press refresh, the print get the code
A26
A6 S0
If i type manual M21,
by
jumbo125
-
Firmware - Marlin
I sended 502 and 500 after flashing up the printer.
Can I do it again now, or will be delete all my settings(mesh bed leveling) etc
by
jumbo125
-
Firmware - Marlin
Hello experts
I used marlin 2.0 on my anycubic i3 mega since nearly 2 month.
Now i have a problem.
At my last prints i got sometimes a error.
Situation: The printer work for a few minutes and suddenly stopps. The Noozle didn't move in any ways. The extruder did nothing and the temperature still works.(Bed and Hotend). I only can press "restart" on the LCD. All other buttons doesn't work. But
by
jumbo125
-
Firmware - Marlin
I have a problem with my Repetier. I use it to insert a gcode.
It is:
G28
G26 C H200 P5 R25 Q4.2 Z4
after i send it to the printer, it starts and print a little example. how can i cancel it? Stop the job?
is there any g-code?
thank you
by
jumbo125
-
Repetier
Hello everyone
I I have a problem with my bed leveling(Anycubic i3 mega). i flash my printer with the marlin firmeware, because i want use the mesh bed levling. After leveling all 25 points, the test was not so good.
My test-code was:
G28
G26 C H200 P5 R25 Q4.2 Z4
So i look for a method to set everyone point without leveling all 25 points. I found this code:
G29 S0
it shows all 25 point coordin
by
jumbo125
-
Firmware - Marlin