Somehow it stopped working when users are required to log in. I have updated it so it now works with login as well. It's a bit tricky as you can get a permissionDenied at the beginning which you need to catch especially if you have already send a login request ignore all permission denied until the callback id of the login is handled. See demo code what I mean.by repetier - Repetier
Depends on your definition of large. Host reads it into ram and also creates graphic data in ram so big could also be out of memory. Check with task manager how memory usage grows. For very big files use our Repetier-server (http://www.repetier-server.com) which does not load complete file into ram so it can print even files bigger then your ram as long as it fits on hard drive.by repetier - Repetier
What you described means the mac connected to a serial driver but does not get the right response e.g. because baud rate is wrong or driver does not support baud rate or wrong serial port (should disappear if you disconnect printer). If your board has a FTDI driver you might need to install the ftdi driver, for all other no driver is required as far as I know. You could also try a direct connecby repetier - Repetier
You have #define FEATURE_Z_PROBE 1 but #define Z_PROBE_PIN 63 not ste to a valid pin. If you do not want z probing, disable that feature and not pin to -1.by repetier - Repetier
You have checked speed dependent positioning. Then you only have one z setting (as well as x y) and rotation speed changes moved distance.by repetier - Repetier
No you can not change that. You can toggle log to hide it. Normally you only need it when having problems or doing calibration.by repetier - Repetier
Hanging compilation is a compiler problem. Can't do anything to that. With errors - shall we guess what errors or will you tell so you could get help:-)by repetier - Repetier
Reupload correct firmware.by repetier - Repetier
Simply rename printer settings and press apply. Then you have 2 settings. But you can still only run one printer at a time, just select which one. You can start repetier 2 times and control 2 printers. You should be aware that this buts much load and resource usage on your computer. A better solution would be installing Repetier-Server. It uses nearly no resources and can handle even more printerby repetier - Repetier
There are so many parameter influencing temperatures, so it would better you show a screenshot of host temperature graph (including output) while heating up along with your parameters. If you do not read target temp. you might need to increase PID drive max whcih is depending on target temperature often too low.by repetier - Repetier
This happens if updating the preview gets too slow. First it reduces the quality (which your image shows) and then it stops updating to keep the print healthy. If updating gets slow the host can not send commands fast enough any more so it would reduce print quality and we do not want this. In Preferences->Basic Settings you can disable quality reduction but I'm not sure if this will also preby repetier - Repetier
Nur so ein hinweis - folge dem Thread nur so halb, aber ich denke es gibt hier ein wenig Verwirrung wie man konstante Geschwindigkeiten erreicht. Das gleiche Problem ist beim delta ja auch gegeben. In repetier-firmware wird ja die kopf bewegung angegeben und die soll konstant sein, wodurch die 3 Motoren alles andere als linear bleiben. Die Lösung dazu ist sehr einfach wenn es einmal verstanden wby repetier - Software
zHomeDir 1 comes from the autocorrection in the config tool and it is good since -1 is wrong. Deltas home to top which is max direction. I also saw you have set 3 min endstops which you most probably do not have. This can prevent moving if this not existing one triggers. Especially with you having check always endstops enabled (which is good). So set z min to "Not Installed" and I guess it will wby repetier - Repetier
The algorithm is iterative improving every iteration (or at least should), so you should use the latest values.by repetier - Repetier
The log is below the graphic if enabled. Just disable easy mode and hit toggle log in toolbar. Old machine could be a reason. OpenGL 1.5 was somewhere during windows xp time near end. So maybe a driver update is available.by repetier - Repetier
When starting a print we simply add all printing times for the moves = total time. Then for each line we send we subtract the time for that line. That way we have a full prediction, but we do not know additions per layer and we do not know where layer switches are while printing. To do that we would need a much more complex structure at print start having all this computations as well.by repetier - Repetier
No, the host does not know per layer printing times. So this will not work. You can set a pause at any position if the gcode just by adding @pause Message than printer will pause exactly at that point. You might even add @sound some lines before to get ready.by repetier - Repetier
The first one. Travel feedrate. Be carefull it is in mm/minute not per second!by repetier - Repetier
Ok, did not know that is a different thing. Have fixed it (i guess) also I did not define #define U8G_DEV_MSG_SET_COLOR_ENTRY 60 #define U8G_DEV_MSG_SET_COLOR_INDEX 60 which were already there. I guess you copied you changes at the beginning so it came before the definition. Anyhow it now compiles the right driver so i guess it will also work for you.by repetier - Repetier
Ok I have added SSD1306 support for I2C and software SPI. So all you now should need to do is in uiconfig.h setting #define U8GLIB_SSD1306_I2C instead of the ST920 driver. Everything else should be changed already, also untested. AllI could test was that it compiles, so no function are missing and all conversions were added. Hope it works now.by repetier - Repetier
Something seems wrong compared with your config. In config you say #define HEATED_BED_DECOUPLE_TEST_PERIOD 360000 While your errors come after 13 seconds. So I guess you are using some different config or it is the extruder triggering the decoupled which has 12 seconds to raise temperature according to config. + 11 signals to make clear it is no accident. So since extruder matches criterion Iby repetier - Repetier
Sure it does. It's just like @pause from host so it runs the pause script and at the end it goes back to start position.by repetier - Repetier
In deed. User needs to click the message on the host to continue. After all it is a request to execute host pause command. Maybe I'd also add a RequestContinue: to simulate the button check in case it was done in firmware. But that will work only in next release then.by repetier - Repetier
Looks pretty much like reprapdiscount smart controller clone, so take that setting (FEATURE_CONTROLLER 2)by repetier - Repetier
For lights we have a special command: M355 S<0/1> - Turn case light on/off, no S = report status M42 is supposed to not work on sensitive pins as defined at the end of pins.h. Not sure why your pin is now there as it does not include light pins.by repetier - Repetier
This is a bug in mac version. Only solution is to delete all settings and reenter or ignore the extra printer. To delete all settings use defaults delete repetier.Repetier-Host-Macby repetier - Repetier
What currently works is sende RequestPause: Some message which will initalite "@pause Some message" on the host. So you can still use manual controls and temperatures get still polled, but print job stops being executed. Next releases will also support full stop of communication with // action:pause and continue sending command // action:continue Then you get no commands at all incluby repetier - Repetier
The host uses the speeds you have set in printer settings for the manual control. Sounds like you have the z speed also for xy.by repetier - Repetier
glGenBuffers is a opengl function required for fast rendering from video memory. Should be included in all OpenGL version from 1.5 upwards. What is the start message about graphic driver in the log and what card/os do you use?by repetier - Repetier
Native port also uses RTS pin I think. Anyhow 1.0.6 has a special mode for native port cause of these problems.by repetier - Repetier