Show all posts by user
Page 2 of 2
Pages: 12
Results 31 — 43 of 43
Just been looking at taulman 910 might try a small sample
by
adambrum
-
Printing
What's peoples opinions on the best filaments for 3d printer parts, I have had some problems with pla delaminating under stress.
I have an e3d hotend and heatbed so should be able to run anything.
Thanks
by
adambrum
-
Printing
Now why didn't i think of that !
Thanks for that
by
adambrum
-
Delta Machines
Hi Andy,
I have your printer up and running no problems at all at 100mm/s except my pla is a little dodgy !
The one thing i wanted to do was print new higher "bottom stepper bases" so i acnput a power supply underneath, Could you send me the sketchup file for the ones you sent me which look like a lite version compared to the thingiverse ones.
Thanks Adam
by
adambrum
-
Delta Machines
Hi Andy,
Got my parts today and managed to get the basic frame built up and squared.
Thanks Adam
by
adambrum
-
Delta Machines
Started my build now following Jands design for printed parts but im using gt2 belts. Most parts are printed, the frame is built and i think all hardware has arrived.
Next big step is to pull my delta apart for the electronics or maybe i should just upgrade to 32bit ?
by
adambrum
-
CoreXY Machines
what are peoples thoughts of using spectra braid instead of belts ?
thanks adam
by
adambrum
-
CoreXY Machines
One step closer to z-probing
Thanks again for your help
by
adambrum
-
Repetier
Im having a little problem with servo control,
Firmware version 0.91 rev 4
host 0.95f
If i send script M340 P1 S500 i get "20:49:34.184 : Printer height:0.01" basicaly i sets whtever height im at to 0,
I have tried with different s values and servo0 and servo1 pins and the same result
Really have no idea whats happening ?
I did find another post about this in german but no answer
Thank
by
adambrum
-
Repetier
I think this is one line, im unable to scroll to the right as it just creates more of the following errors
17:19:17.906 : Error drawing 3d view:Attempted to read or write protected memory. This is often an indication that other memory is corrupt. / at OpenTK.Graphics.OpenGL.GL.DrawElements(BeginMode mode, Int32 count, DrawElementsType type, IntPtr indices)
at RepetierHostExtender.geom.Subm
by
adambrum
-
Repetier
Thanks for getting back,
Tried the new version and no windows errors but loads in repetier, Hopefully thers a link to a screenshot showing the errors
^^ The link to the url works
Thanks Adam
by
adambrum
-
Repetier
Hi,
Been having a few problems with 0.95f and the previous 0.95e but 0.9c works ok.
I have tried uninstalling everything including the registry keys, Ran in 16 and 32bit graphics mode and different resolutions.
Guessing its to do with the graphics ?.
Copy of graphics properties.
Video Card Vendor: Intel
Renderer: Intel 965/963 Graphics Media Accelerator
OpenGL Version: 2
by
adambrum
-
Repetier
This my first post so be gentle,
I have just built a prusa I3 which went well but now im going to build my own machine, Most the design is floating around in my head and on scrapes of paper but im a little stuck on z-axis.
I realy want to go with trapezoidal threads but not sure if the pitch would be too mucht, the ones i have available are TR8x8 or TR8x1.5 im thinking the TR8x1.5 would be perf
by
adambrum
-
Mechanics
Page 2 of 2
Pages: 12