Show all posts by user
Safety...
Page 1 of 5
Pages: 12345
Results 1 — 30 of 147
I think I forgot how to get my Z heights right. Too many changes and version on the forum now.
; Configuration file for Duet 0.6 (firmware version 1.20 or newer)
; executed by the firmware on start-up
;
; generated by RepRapFirmware Configuration Tool on Sat Mar 17 2018 10:36:25 GMT+0800 (Malay Peninsula Standard Time)
; General preferences
G90 ;
by
antlvk
-
Ormerod
Thank you very much guys. Indeed great support group.
by
antlvk
-
Ormerod
; Ormerod 1 config file for dc42 Duet firmware
M111 S0 ; Debug off
M550 PAnthony Ormerod ; Machine name (can be anything you like)
M551 Preprap ; Machine password (currently not used)
M540 P0xBE:0xEF:0xDE:0xAD:0xFE:0xED ; MAC Address
;*** Adjust the IP address and gateway in the following 2 lines to suit your network
M552 P192.168.1.222
by
antlvk
-
Ormerod
After few year going to prusa. Now I reviving my old Ormerod 1. But seems many update after I've left.
I've updated to firmware 1.21RC4 and now I cannot home as my X is crashing to the left. Is there anything changed on pin side?
10:34:08 PMError: Z probe already triggered at start of probing move
Error: Homing failed
10:34:07 PMError: Z probe already triggered at start of probing move
Error
by
antlvk
-
Ormerod
Printing ok now, with width of 0.4-0.45mm settings
by
antlvk
-
Ormerod
Ops sorry, i what i meant is extrude some at the corner before start with printing. To get ready the extruder to print and get some extras ooze off the head.
by
antlvk
-
Ormerod
gcode for unload filament at corner before printing starts after heat up. is it possible?
by
antlvk
-
Ormerod
Thanks Printing ok now. Just the infill and solid are very thin. maybe its the extrusion width?
by
antlvk
-
Ormerod
I've change my extruder steps M92 430 to M92 E477 after some calculation following the old ormerod 1 instruction, seems better. more testing later.
by
antlvk
-
Ormerod
Changed from 0.5mm to 0.3mm nozzle do I need to re set extruder steps or something?
by
antlvk
-
Ormerod
I've been not printing for many months now. from 0.96 directly to 1.04 firmware. anything i need to keep my eyes on? no cable need to change? Sorry cause I kinda lost. While i'm still using ori ormerod 1
by
antlvk
-
Ormerod
ops forgot 1 attachment
by
antlvk
-
Slic3r
Why my support material come with perimeter? as in the pic i shared. i tried all pattern all comes with perimeter and it is super hard to remove. it is like one of the part printed
by
antlvk
-
Slic3r
I'm using Cura engine in Repetier. Maybe that is the problem?
by
antlvk
-
Ormerod
I'm confused. Should I run Absolute position or Relative Position?
by
antlvk
-
Ormerod
G0 F9000 X99.922 Y96.704
G1 F2100 E677.11110
G0 F9000 X99.922 Y96.704 Z14.000
; Default end code
;G1 X0 Y0 Z130 ; Get extruder out of way. Uncomment to use!
G1 X2 Y190; park the machine
;M1
;M107 ; Turn off fan
; Disable all extruder
;G91 ; Relative positioning
T1
G1 E-1 ; Reduce filament pressure
;M104 T0 S0
;G90 ; Absolute positioning
;G92 E0 ; Reset extruder position
;M140 S0 ; Disable heated
by
antlvk
-
Ormerod
New problem, after finish printing. The extruder restract the whole loaded filament out automatically
by
antlvk
-
Ormerod
It works, Thank you very very much
by
antlvk
-
Ormerod
And all motor are powered except extruder
by
antlvk
-
Ormerod
; Configuration file for RepRap Ormerod
; RepRapPro Ltd
;
M111 S0 ; Debug off
M550 PAnthony's Ormerod 3D Printer ; Machine name (can be anything you like)
M551 Preprap ; Machine password (currently not used)
M540 P0xBE:0xEF:0xDE:0xAD:0xFE:0xED ; MAC Address
M552 P192.168.31.144 ; IP address
M553 P255.255.255.0
by
antlvk
-
Ormerod
It shows up as Active
by
antlvk
-
Ormerod
When turn on and try tu retract or forward in any speed or length it won't work. please help
Using Web 1.08 and 0.96i-zpl firmware
Here is my config
; Configuration file for RepRap Ormerod
; RepRapPro Ltd
;
M111 S0 ; Debug off
M550 PAnthony's Ormerod 3D Printer ; Machine name (can be anything you like)
M551 Preprap ; Machine password (currently not used)
M540 P0xBE:0xEF:0xDE:0xAD:0xFE:0xED ;
by
antlvk
-
Ormerod
Something funny just now happened. PTFE tube to feed pla to the head just sparked.... only once but wonder why?
by
antlvk
-
Ormerod
ok it works with your new firmware but having problem with web control
extruder control what ever setting i use also only load by 1mm i cant load 400mm, it will take ages to load my filament, lol
by
antlvk
-
Ormerod
Shouldn't be wires. Cause everytime the extruder will heat perfectly and fast. just as the temp met the head become on active and temp goes down. i try out the new firmware first. thanks
by
antlvk
-
Ormerod
G21 ; set units to millimeters
M107
M190 S60 ; wait for bed temperature to be reached
M104 S195 ; set temperature
T1
M107
G28
M109 S195 ; wait for temperature to be reached
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
G1 F1800.000 E-2.40000
G1 Z0.200 F7800.000
G1 X80.791 Y84.693 F7800.000
G1 E2.40000 F1800.000
by
antlvk
-
Ormerod
M111 S0 ; Debug off
M550 PAnthony's Ormerod 3D Printer ; Machine name (can be anything you like)
M551 Preprap ; Machine password (currently not used)
M540 P0xBE:0xEF:0xDE:0xAD:0xFE:0xED ; MAC Address
M552 P192.168.1.14 ; IP address
M553 P255.255.255.0 ; Netmask
M554 P192.168.1.1 ; Gateway
M555 P2 ; Set output to look like Marlin
G21 ; Work in millimetres
G90 ; Send absolute corrdinates...
M83 ; .
by
antlvk
-
Ormerod
when i print thing stop working when temp for extruder is met. temp going down after temp is met and it wont print after that.
by
antlvk
-
Ormerod
Page 1 of 5
Pages: 12345