Show all posts by user
Safety...
Page 5 of 5
Pages: 12345
Results 121 — 147 of 147
my setbed.g
G31 Z2.57 P656
G30 P0 X60 Y0 Z0
G30 P1 X60 Y180 Z-0.2
G30 P2 X180 Y180 Z0.6
G30 P3 X180 Y20 Z0.7 S
by
antlvk
-
Ormerod
I'm running on latest firmware. I tried send manually, can print but print levitated
by
antlvk
-
Ormerod
How about hard code in the config.g?
by
antlvk
-
Ormerod
Is it navigate to where I think is center then key in the X and Y? Thanks
by
antlvk
-
Ormerod
Help: How to center to print bed to x100 y100? Because it's not centered i can't print full bed of parts. Thanks in advance
by
antlvk
-
Ormerod
yup my white paper flew off that's why it crashed.
by
antlvk
-
Ormerod
crashing because why white paper on the X axis flew off. lol. now X calibrate normally
by
antlvk
-
Ormerod
NVM found the problem
by
antlvk
-
Ormerod
NVM found the problem
by
antlvk
-
Ormerod
I found out to set G31 Z2.59 P656 to zero my heights now but when i put this in config.g or setbed.g it will crash my print head to the X axis. funny
by
antlvk
-
Ormerod
When ever i put this
G31 Z2.59 P656 to config.g it will crash my head to the x wall. anyone?
by
antlvk
-
Ormerod
tried cura 13 same thing . crash or nothing happen.
by
antlvk
-
Ormerod
How to permanently 0 the Z axis? or I missing something?
by
antlvk
-
Ormerod
I'ts more like the software itself as it crash if i click somewhere while in the slicing mode. or even if it finish slicing it will undim the print button and nothing happen.
\BTW here is the code
;Generated with Cura_SteamEngine 13.12
M140 S60.000000
M109 T0 S205.000000
T0
M190 S60.000000
G21
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
M140 S65; Set bed temperatur
by
antlvk
-
Ormerod
Mine a bit loose on the gear on the motor (EDIT) would it be bettter using PLA?
by
antlvk
-
Ormerod
Fix it already donno how to get back to the error now.. lol... probably some gcodes i'm trying. I use back default slicer profile now.
by
antlvk
-
Ormerod
Will try again you firmware. Thanks for your effort . BTW if using 057t without your mod still works right?
by
antlvk
-
Ormerod
I see.... thanks for the info. Thats why printing normally from SD
by
antlvk
-
Ormerod
BTW circle.g turn round smoothly
by
antlvk
-
Ormerod
Printing round object head not turning round smoothly but it's like jerky movement going round point by point. That making blob on every point it jerk
by
antlvk
-
Ormerod
Totally won't start to print.... got cura 14 and the plugin...
by
antlvk
-
Ormerod
Arduino Duet is there any spare pin that we could do some custom coding for some functions? like extra fans, buzzer beeping when board are ready, start printing etc...
by
antlvk
-
Ormerod
OK change back firmware from dc's version t to reprappro's a, everything works find
by
antlvk
-
Ormerod
OK. Thanks for the info. But when I really print after many times try the manual bed compensation and printing still levitate about 2mm
by
antlvk
-
Ormerod
I've followed Bed Plane Compensation guide from the reprappro documentation everything folloed and seems right once try print circle.g i print on the air instead on the bed.... hmmm
by
antlvk
-
Ormerod
Plain paper does works! Thanks
by
antlvk
-
Ormerod
Anyone? the X when initializing keep hitting is wall and motor keep running until few second to stop. Tested can get reading from the iR. hmmm...
by
antlvk
-
Ormerod
Page 5 of 5
Pages: 12345