How old are we talking? I have a set of the pic based electronics that are mostly complete and last I checked were still working. They are all based on the last boards produced that were pic based. So the universal board stuff. Got stepper motors that work with them as well. Whatever the kelling ones were. I'm currently stalled on actually finishing the darwin I started several years back due toby Graxe - For Sale
I'd be glad to make a couple of sets. I have plenty of mdf now because I bought a 4X8 sheet. Turns out the acrylic I have is like 1/10th of an inch so it is probably way to thin to use. I'll post here once I have a couple of sets made to see if there is still interest. Also I can be found in the reprap irc channel if needed. Thanks, Gregby Graxe - Reprappers
Hi all, I found out my dad has a scroll saw and I am learning how to use it. I am going to cut my own set of mcwire boards. What I wanted to know is if there would be any interest if I cut several sets. Only problems with what I would be making are as follows: it would probably be made of plywood or mdf, and the quality might not be amazing to look at. (I am learning this as I go thats why). I'mby Graxe - Reprappers
Hi everyone, I've so far gotten everything working and am now finishing assembly of the extruder controller boards for Darwin. My current question is what heatsink should I use for the Tip 110 transistors? I can't seem to find it marked anywhere. Thanks for the help. Gregby Graxe - Controllers
Thanks for the help. I just tried booting up the live dvd and that worked. That I assume means I have a problem with the software installed on my two computers that I installed it on. I'll see if I can figure it out but not I'm going to go and continue testing the boards. Thanks! Gregby Graxe - Controllers
Hi all, I am currently still working on buildling a Reprap and have gotten to a point where I am testing the Universal Controller Boards for Darwin. When trying to test the board on test three in the tutorial I cannot seem to get the debug led to blink. Both power and programming of the pics were successful. There does not appear to be any issues with the soldering. I also cannot get the steby Graxe - Controllers
Hi all, I am in the process of building a Darwin Reprap based around the documentation. I was hoping someone could link me to the Darwin version of the wiring guide. I was able to find an Audrino version but I figure that won't help me much. The Audrino version was here for reference: Thanks, Gregby Graxe - Reprappers