Category:MOST
By Michigan Tech's Open Sustainability Technology Lab.
Wanted: Students to make a distributed future with solar-powered open-source RepRap 3-D printing and recyclebot recycling. |
This page is part of an international project hosted by MOST to use RepRap 3-D printing to make OSAT for sustainable development. Learn more.
Research: Open source 3-D printing of OSAT • RecycleBot • LCA of home recycling • Green Distributed Recycling • Ethical Filament • LCA of distributed manufacturing • RepRap LCA Energy and CO2 • Solar-powered RepRaps • solar powered recyclebot • Feasibility hub • Mechanical testing • Lessons learned • MOST RepRap Build Make me: Want to build a MOST RepRap? - Start here! • Delta Build Overview:MOST • Athena Build Overview • MOST metal 3-D printer • Humanitarian Crisis Response 3-D Printer |
This is the category that will contain all of MOST's RepRap projects...coming soon.
Contents
Articles
2018
How to Install a Heated Bed and Printhead Heater Cartridge for the Ultimaker 2 Go
3D printers in the public library: Finland ahead of the curve
Tricks for telling if your 3D print is good enough for your bike
Take Climate Change Preparation Into Your Own Hands
2017
Low-Cost 3D Printers Are Growing Up Can You Earn 1000% ROI with 3-D Printing At Home? How buying a 3D printer can save you money 3D Printing The Next Five Years Three reasons for open source tech in your 3D printing classroom Clones welcome in scientific hardware Open source hardware: first issue of HardwareX now available The first open source 3D printer filament Design and produce 3D printed, custom breast prosthetics How an open source board game is saving the planet HardwareX journal reveals the equipment behind the science Fall Bridge on Open Source Hardware Is the rise of open source connected to a decline in selfishness? Paying it forward at Finland's Aalto Fablab How to use OpenSCAD to design for 3D printing
2016
https://www.huffingtonpost.com/joshua-pearce/3-d-printers-are-finally_b_10622998.html https://www.materialstoday.com/mechanical-properties/news/hardware-x-new-open-access-journal-for-open-source/ https://www.huffingtonpost.com/joshua-pearce/building-your-own-home-fr_b_10737124.html http://www.ariadne.ac.uk/issue/76/pearce/ https://opensource.com/life/16/11/maker-open-source-communities https://opensource.com/article/16/12/best-of-hardware
2015
https://www.academia.edu/14049733/Intellectual_Property_as_a_Strategic_National_Industrial_Weapon_the_Case_of_3D_Printing https://opensource.com/education/15/3/open-source-3d-printing-course https://blogs.scientificamerican.com/guest-blog/science-for-all-how-to-make-free-open-source-laboratory-hardware/ https://www.engineeringforchange.org/news/buckle-up-for-fast-tracked-science-thanks-to-open-source-hardware/ 3-D printable photovoltaic module spacer
Subcategories
This category has the following 3 subcategories, out of 3 total.
Pages in category "MOST"
The following 141 pages are in this category, out of 141 total.
3
- 3-D printable open source dual axis gimbal system for optoelectronic measurements
- 3-D printable photovoltaic module spacer
- 3-D Printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing
- 3-D printing open-source click-MUAC bands for identification of malnutrition
- 3-D Printing Solar Photovoltaic Racking in Developing World
- 3D Metal Printing Slicer Plugin
A
- A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials
- Aluminum substrate cleaning for 3-D printing:MOST
- Anisotropic mechanical property variance between ASTM D638-14 type I and type IV fused filament fabricated specimens
- Applications of Open Source 3-D Printing on Small Farms
- Applications of Open Source GMAW-Based Metal 3-D Printing
- Applications of RepRap distributed production - literature review
- Approaches to Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations
- Athena Build Overview
B
C
D
- Delta Build Overview:MOST
- Delta Build Workshop
- Democratising design in scientific innovation: application of an open value network to open source hardware design
- Design Optimization of Polymer Heat Exchanger for Automated Household-Scale Solar Water Pasteurizer
- Development and feasibility of applications for the RepRap 3-D printer
- Development of a Resilient 3-D Printer for Humanitarian Crisis Response
- Distributed Manufacturing of Flexible Products- Technical Feasibility and Economic Viability
- Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems
- Distributed recycling of post-consumer plastic waste in rural areas
E
- Economic Potential for Distributed Manufacturing of Adaptive Aids for Arthritis Patients in the U.S.
- Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers
- Emerging Business Models for Open Source Hardware
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System
- Environmental impacts of distributed manufacturing from 3-D printing of polymer components and products
- Environmental life cycle analysis of distributed 3-D printing and conventional manufacturing of polymer products
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament
- Evaluation of RepRap 3D Printer Workshops in K-12 STEM
- Expanded microchannel heat exchanger
- Expanded microchannel heat exchanger: Non-destructive evaluation
- Expanding the Consumer Bill of Rights for material ingredients
- Experimental Characterization of Heat Transfer in an Additively Manufactured Polymer Heat Exchanger
F
- Fabricating Ordered 2-D Nano-Structured Arrays Using Nanosphere Lithography
- Factors effecting real-time optical monitoring of fused filament 3D printing
- Franklin Firmware on GigabotHX:MOST
- Franklin:MOST
- Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD
- Free and open-source automated 3-D microscope
- Free and Open-source Control Software for 3-D Motion and Processing
- Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties
G
I
- Impact of DIY Home Manufacturing with 3D Printing on the Toy and Game Market
- Implementing Self-Replicating Rapid Prototypers (RepRaps) into a Mechanical/Manufacturing Program
- Improved model and experimental validation of deformation in fused filament fabrication of polylactic acid
- Improving recyclebot concepts
- In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-D Printing
- Integrated Voltage—Current Monitoring and Control of Gas Metal Arc Weld Magnetic Ball-Jointed Open Source 3-D Printer
L
- Laser welding protocol: MOST
- Life cycle analysis of distributed polymer recycling
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament
- Life cycle analysis of polymer recycling literature review
- Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers
- Low-cost Open-Source Voltage and Current Monitor for Gas Metal Arc Weld 3-D Printing
M
- Maximizar la rentabilidad de la inversión para la salud pública con hardware médico de código abierto
- Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins
- Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions
- Mechanical testing of polymer components made with the RepRap 3-D printer
- Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities
- Modular Design for Spherical Microphone Arrays
- Template:MOST
- MOST Metal Cura
- MOST open-source metal 3-D printer v2
- MOST quad delta RepRap
- MOST RepRap
- MOST RepRap Build
- MOST Reprap Printing Lessons
- Multi-material additive and subtractive prosumer digital fabrication with a free and open-source convertible delta RepRap 3-D printer
O
- Open Source 3-D Printed Nutating Mixer
- Open Source 3-D Printers: An Appropriate Technology for Developing Communities
- Open source 3-D printing of OSAT
- Open source 3D printers: an appropriate technology for building low cost optics labs for the developing communities
- Open Source Database and Website to Provide Free and Open Access to Inactive U.S. Patents in the Public Domain
- Open Source Lab
- Open Source Laboratory Sample Rotator Mixer and Shaker
- Open Source Laser Polymer Welding System: Design and Characterization of Linear Low-Density Polyethylene Multilayer Welds
- Open source laser system for polymeric welding
- Open Source Low-Cost Power Monitoring System
- Open Source Multi-Head 3D Printer for Polymer-Metal Composite Component Manufacturing
- Open Source Polymer Welder Literature Review
- Open source rapid prototyping of OSAT
- Open source science
- Open-source 3-D Platform for Low-cost Scientific Instrument Ecosystem
- Open-source 3-D Printing in Managing Humanitarian Innovation
- Open-source 3-D printing Technologies for Education: Bringing Additive Manufacturing to the Classroom
- Open-source 3D-printable optics equipment
- Open-Source Automated Mapping Four-Point Probe
- Open-source colorimeter
- Open-source hardware for research and education
- Open-source metal 3-D printer
- Open-source mobile water quality testing platform
- Open-source nanotechnology: solutions to a modern intellectual property tragedy
- Open-source parametric 3-D printed slot die system for thin film semiconductor processing
- Open-Source Photometric System for Enzymatic Nitrate Quantification
- Open-source syringe pump
- Open-Source Three-Dimensional Printable Infant Clubfoot Brace
- Open-source Wax RepRap 3-D Printer
- Open-source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics
- Open-source, self-replicating 3-D printer factory for small-business manufacturing
- Optimal Design of Thin-film Plasmonic Solar Cells using Differential Evolution Optimization Algorithms
- OSAT
P
R
- Recyclebot
- RecycleBot modification - automated feeder
- RepRap Mechanical Testing Literature Review
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament
- Reversing the Trend of Large Scale and Centralization in Manufacturing: The Case of Distributed Manufacturing of Customizable 3-D-Printable Self-Adjustable Glasses
S
- Self-sufficiency of 3-D printers: utilizing stand-alone solar photovoltaic power systems
- Slicer and process improvements for open-source GMAW-based metal 3-D printing
- Solar powered distributed customized manufacturing
- Solar powered recyclebot literature review
- Sponsored Libre Research Agreements to Create Free and Open Source Software and Hardware
- Substrate Release Mechanisms for Gas Metal Arc Weld 3D Aluminum Metal Printing
T
- Tensile Strength of Commercial Polymer Materials for Fused Filament Fabrication 3-D Printing
- Tensile test protocol: MOST
- The Effects of PLA Color on Material Properties of 3-D Printed Components
- The RepRap 3-D Printer Revolution in STEM Education
- Thermal properties of 3-D printed polylactic acid-metal composites
- Three Hundred and Sixty Degree Real-Time Monitoring of 3-D Printing Using Computer Analysis of Two Camera Views
- Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing
- Total U.S. cost evaluation of low-weight tension-based photovoltaic flat-roof mounted racking
- Towards Low-Cost Microchannel Heat Exchangers: Vehicle Heat Recovery Ventilator Prototype