New user of marlin with some questions February 03, 2018 06:29PM |
Registered: 6 years ago Posts: 2 |
Re: New user of marlin with some questions February 03, 2018 07:41PM |
Registered: 6 years ago Posts: 1,866 |
Quote
jesse002100
I've leveled it several times thru the menu and it does a 9 point leveling before each print.
[photos.app.goo.gl]
Quote
jesse002100
Second issue is the screen goes to gibberish and will come back if I hit the center button but it has seemingly caused the printer to stop and reset or it was a coincidence.
[photos.app.goo.gl]
Quote
jesse002100
And lastly the center of the slicer does not print on the center of the bed its off a good but on x/Y.
[photos.app.goo.gl]