Hello,

I`m printing with clay using the E0 stepper inside the extruder head and an air compressor to feed the extruder with clay.
I want to replace the compressor with another stepper that pushes a plunger, helped with a gearbox, so i need the same movement in both steppers.
I achieve installing the second stepper and moving it with the G-code but picking out first the one that i want to move with T0 and T1, so i can`t move them simultaneously with the same order.

The Firmware I`m using is Marlin 1.1.9, and the board is a Trigorilla (Anycubic Kossel) which is equivalent to the RAMPS 14,

Thanks in advance

... why here? - I'll move it to Marlin forum ...

---

Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]

Also X-posted [reprap.org]
Where I have attempted to answer them..