Just been looking at taulman 910 might try a small sampleby adambrum - Printing
What's peoples opinions on the best filaments for 3d printer parts, I have had some problems with pla delaminating under stress. I have an e3d hotend and heatbed so should be able to run anything. Thanksby adambrum - Printing
Now why didn't i think of that ! Thanks for thatby adambrum - Delta Machines
Hi Andy, I have your printer up and running no problems at all at 100mm/s except my pla is a little dodgy ! The one thing i wanted to do was print new higher "bottom stepper bases" so i acnput a power supply underneath, Could you send me the sketchup file for the ones you sent me which look like a lite version compared to the thingiverse ones. Thanks Adamby adambrum - Delta Machines
Hi Andy, Got my parts today and managed to get the basic frame built up and squared. Thanks Adamby adambrum - Delta Machines
Started my build now following Jands design for printed parts but im using gt2 belts. Most parts are printed, the frame is built and i think all hardware has arrived. Next big step is to pull my delta apart for the electronics or maybe i should just upgrade to 32bit ?by adambrum - CoreXY Machines
what are peoples thoughts of using spectra braid instead of belts ? thanks adamby adambrum - CoreXY Machines
One step closer to z-probing Thanks again for your helpby adambrum - Repetier
Im having a little problem with servo control, Firmware version 0.91 rev 4 host 0.95f If i send script M340 P1 S500 i get "20:49:34.184 : Printer height:0.01" basicaly i sets whtever height im at to 0, I have tried with different s values and servo0 and servo1 pins and the same result Really have no idea whats happening ? I did find another post about this in german but no answer Thankby adambrum - Repetier
I think this is one line, im unable to scroll to the right as it just creates more of the following errors 17:19:17.906 : Error drawing 3d view:Attempted to read or write protected memory. This is often an indication that other memory is corrupt. / at OpenTK.Graphics.OpenGL.GL.DrawElements(BeginMode mode, Int32 count, DrawElementsType type, IntPtr indices) at RepetierHostExtender.geom.Submby adambrum - Repetier
Thanks for getting back, Tried the new version and no windows errors but loads in repetier, Hopefully thers a link to a screenshot showing the errors ^^ The link to the url works Thanks Adamby adambrum - Repetier
Hi, Been having a few problems with 0.95f and the previous 0.95e but 0.9c works ok. I have tried uninstalling everything including the registry keys, Ran in 16 and 32bit graphics mode and different resolutions. Guessing its to do with the graphics ?. Copy of graphics properties. Video Card Vendor: Intel Renderer: Intel 965/963 Graphics Media Accelerator OpenGL Version: 2by adambrum - Repetier
This my first post so be gentle, I have just built a prusa I3 which went well but now im going to build my own machine, Most the design is floating around in my head and on scrapes of paper but im a little stuck on z-axis. I realy want to go with trapezoidal threads but not sure if the pitch would be too mucht, the ones i have available are TR8x8 or TR8x1.5 im thinking the TR8x1.5 would be perfby adambrum - Mechanics