Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 17 of 17
hola a todos alguien me puede explicar como hacer esto.
lo que vemos es una pantalla de una i3 con marlin cargado ero que en vez de mostrar lo que pasa en Z muestra la potencia de pwm fijada en el fan
Gracias.
by
gosth87
-
RepRap Usergroup - Argentina
Hi, thanks for the interest.
No, single parts 2d, a single motor-steper communicated with the two ends of the wire mechanically.
What I need is to modify the menu section and screen presentation
by
gosth87
-
Firmware - Marlin
Hi everyone, I have been looking for a while for a Marlin to be able to assemble a two-axis X-axis Y-axis polyfan cutter
The idea is to use a 1.4 + mega ramp with lcd and SD to be able to make it 100% autonomous to a pc.
If someone has one or knows one of them, they will be welcome.
On the other hand, when I did not get this, I decided to take the marlin from a pristine printer and modify it for
by
gosth87
-
Firmware - Marlin
Hola a todos estoy buscando desde hace un tiempo un Marlin para poder armar una cortadora de polyfan de dos ejes X Y por hilo caliente
la idea es de usar una ramp 1.4 + mega con lcd y SD para poder hacerla 100% autónoma a una pc.
Si alguien tiene uno o conoce de alguno sera bienvenido.
Por otro lado al no conseguir esto que les comento mas arriba decidí tomar el marlin de una impresora prusa y mo
by
gosth87
-
RepRap en Español
QuoteRoxy
There is laser control built into Marlin. And there is more of that coming soon. If you just want to cut or scar a material.... Everything you need is in the main branch. The bigger problem is getting your hardware configured.
Actually what i want to put together is a hot wire cnc to cut polyfan
by
gosth87
-
Firmware - Marlin
Quotequbotica
Si es funciona con ramps y con cnc shield
La mia tiene una ramps
esto queme pasaste esta armado con un uno y cnc shield no con una ramp 1.4 vos usaste ese firmware en una ramp?
by
gosth87
-
RepRap Usergroup - Argentina
si lo armo con este sistema no puedo poner un lcd
esa es la macana
por eso buscaba algo con ramp para poder poder un control y directamente pasar los archivos en codigo G por la SD
by
gosth87
-
RepRap Usergroup - Argentina
PEDIDO - 7 years ago
Hola a todos quisiera consultarles si alguien armo alguna maquina de 2 ejes con arduino + ramp 1.4
estoy queriendo armar una cortadora de polifan por hilo caliente y no encuentro de donde descargar el fimware para mi areduino mega + ramp 1.4
alguien me da una mano?
Gracias
by
gosth87
-
RepRap Usergroup - Argentina
Hello everyone
I'm trying to build a foam cutter by hot thread
I would like to control it via arduino one + cncshield, someone has in their possession a marlin to control this type of machines?
Where can I get it ?
Thank you
by
gosth87
-
Firmware - Marlin
Hello everyone
I'm new to this and I'm not very familiar yet
The problem is that I can not calibrate the extrusion motor
Is of the direct system by means of gear teeth
I've read tutorials where it says how to calibrate through "DEFAULT_AXIS_STEPS_PER_UNIT {40, 40, 40, 96}" using the formula
But I can not calibrate it is but for more that it changes to any value always does the same route
1mm = 50
by
gosth87
-
Delta Machines
Hola a todos reciente mente arme un kit delta Anycubic kossel lineal
después de configurar manualmente la altura de la cama y hacer algunas impresiones, decidí por comodidad montar un sensor mecanico para hacer autocalibrado
el problema es que no logro autocalibrar
así monte el sensor
luego controle el marlin y note que ya estaba preparado para recibir el autolevel asi que conecte via pront
by
gosth87
-
RepRap Usergroup - Argentina
I think it's a pwm problem
Playing pin assignment
#define FAN_PIN 9
#define FAN2_PIN 7
#define CONTROLLERFAN_PIN 44
Manage to control the fan of the piece
But when regulating different speeds this reaching 255 stops and emits a shriek
In low of 50 also
Then note that if you applied
#define FAN_PIN 7
#define FAN2_PIN 9
#define CONTROLLERFAN_PIN 44
I could also control this turbofan (by changin
by
gosth87
-
Firmware - mainstream and related support
The hot end fan always goes on?
To 100%
If so, you could use it directly from a 12V line
And to the other put it in the line of pin7 modifying the code?
Dust in which tab you found
#define FAN_PIN 9
#define FAN2_PIN 44
#define CONTROLLERFAN_PIN 7 ?????
by
gosth87
-
Firmware - mainstream and related support
If I enter the code that happened to me
the result is
M106 P2 S255 ---- no movement
M106 P0 S0 ----- no movement
M106 P0 S255 ---- fan of the printing no movement
M106 P0 S0 ----- fan of the impression movement average as 50% would say
M106 P1 S255 ----- no changes
M106 P1 S0 ------ no changes
by
gosth87
-
Firmware - mainstream and related support
you are right
This is the firmware provided by the manufacturer anycube for delta kossel
Does not start with the machine
Neither when making impressions
gui is cura 15.4.6
by
gosth87
-
Firmware - mainstream and related support
Hi, I'm new to the forum, I bought a printer anycube tipe delta kossel linear
It has a trigorilla motherboard
I'm new to this world and I do not understand much
The problem is that you never turn on fan 0 or 2
Someone can help me to solve the problem I give them the necessary data
tanks
by
gosth87
-
Firmware - mainstream and related support