Thank you for your answer obewan. I also posted on the repetier forum and got answers there.by Mister Fab - Repetier
Hi all, I have a prusa i3, with an inductive probe on Z. With the Marlin firmware, the probe is also used as the Z endstop, and it works well. As I modified the printer with dual extruder, I wanted to switch to Repetier, but I can't get the Z probe to work as an endstop. I have been trying for two days to configure Repetier, but nothing works. Has anyone got an idea?by Mister Fab - Repetier
Salut, Je déterre ce post car je me retrouve dans la même situation. Je n'arrive pas à faire fonctionner le capteur inductif de la prusa I3 rework avec le firmware repetier. Si quelqu'un pouvait poster une copie de sa conf pour que j'y jette un oeil, ce serait sympa.by Mister Fab - RepRap Groupe d'Utilisateurs Francophone
Bon, après test, j'ai essayé fanSpeed = 0; ça n'a pas fonctionné, puis j'ai remplacé par analogWrite(FAN_PIN, 0); qui n'a pas fonctionné non plus. Par contre, j'ai cherché le bouton sur le LCD, je l'avais complètement oublié car peu visible dans le boitier que j'ai imprimé. Celui ci fonctionne et me stoppe bien tout sans faire de modification à marlin. Par contre, il fait planter le firby Mister Fab - RepRap Groupe d'Utilisateurs Francophone
Ouahou ! Merci pour tout ça. Je teste dès que j'ai un peu de temps et je te dis comment ça a fonctionné. La commande me sert pour une modif de la prusa avec un laser, qui est commandé par m106 et m107.le problème c'est qu'il ne s'arrête pas avec la commande stop du lcd. Et du coup le bouton d'urgence aurait la même fonction, car jai déjà un bouton urgence qui coupe l'alimentation, mais je préby Mister Fab - RepRap Groupe d'Utilisateurs Francophone
Salut DeuxVis, Merci pour ta réponse. J'utilise le firmware de EmotionTech prusa i3 rework 1.5 Marlin prusa i3 rework 1.5 J'ai déjà commencé à regarder le code mais je ne suis pas assez expert en arduino. J'ai trouvé ce qui correspond au menu affiché dans le fichier ultralcd.cpp "arrêter l'impression" correspond à la variable MSG_STOP_PRINT que l'on trouve dans le fichier language.h Après jby Mister Fab - RepRap Groupe d'Utilisateurs Francophone
Salut à tous. J'ai déjà posté dans le forum international sans succès J'ai besoin de lancer la commande M107 quand je sélectionne arrêt sur l'écran de ma prusa i3. Est ce que quelqu'un pourrait m'aider?by Mister Fab - RepRap Groupe d'Utilisateurs Francophone
Hi all I already posted in the prusa section but I will probably get answers with developers. I have modified my prusa i3 with a laser. The laser uses M106 and M107 commands for on and off. But when I select stop from the lcd menu, the laser stays on. How can I add in Malin the M107 command to be sent while I select stop? In the same idea I would like to add an external emergency stop buttonby Mister Fab - Developers
Hi all I have modified my prusa i3 with a laser. The laser uses M106 and M107 commands for on and off. But when I select stop from the lcd menu, the laser stays on. How can I add in Malin the M107 command to be sent while I select stop? In the same idea I would like to add an external emergency stop button I would connect to an available pin on the ramps. I want the button to send the stop commby Mister Fab - Prusa i3 and variants
Hi Sorry I just saw your message. I will be away from home for a few days so can't work on it. I just had a look at your topic. You seem to be getting something interesting.by Mister Fab - Laser Cutter Working Group
Thank you for you precision falwty99. I just try to understand everything. I don't really have an high electronics skills, you seem to understand much better than me the TTL stuff. When you say to check if TTL inputs are connected to ground, am I right if I test the continuity between these wires and the minus of the 12V laser power input?by Mister Fab - Laser Cutter Working Group
Thank you cozmicray. I already got information from this website, and that's why I wanted to use D9 as their driver uses that pin also. I won't have much time to test during the weekend anyway, but I keep questioning myself about the differences between jtech driver and my chinese driver that couldn't use D9.by Mister Fab - Laser Cutter Working Group
Quotefalwty99 Connect signal and ground from SERIAL 4/pin 4 to TTL on the laser driver. Do you mean ground and pin 3 (D4) to respectively ground and signal of the laser TTL?by Mister Fab - Laser Cutter Working Group
Ok, I understand better. Thank you. I have been looking around a lot to find information on how to connect a laser on the ramps. Could you give me any information, or any links so i would be able to modify marlin? My idea is to make a double head so I can use the extruder or the laser.by Mister Fab - Laser Cutter Working Group
I'm surprised about your answer. I tested the output with my oscilloscope, and I got these results using the M106 command from 0 to 255by Mister Fab - Laser Cutter Working Group
Hi all, I just received all I need to modify my prusa i3 into a laser cutter. I bought a chinese laser on ebay to make my first tests, I will see next to buy a better one. The laser is this the one on the attached photo I tested my D9 output and it gives 12V. As the TTL input accepts 5V I built a regulator using a 7805 circuit as on the schematic attached. Does everything seem ok? I wouln'tby Mister Fab - Laser Cutter Working Group
je crois que j'ai trouvé dans les paramètres du firmware: #define min_software_endstops true // If true, axis won't move to coordinates less than HOME_POS. #define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below. // Travel limits after homing #define X_MAX_POS 200 #define X_MIN_POS 0 #define Y_MAX_POS 190 #define Y_MIN_POS 0 #define Zby Mister Fab - RepRap Groupe d'Utilisateurs Francophone
Salut à tous, Je suis confronté à un problème de taille de pièce. Sur le slicer, elle ressort impeccable après le slicing, mais quand je lance l'impressio, la buse ne va pas au bout de l'axe X ni du Y, du coup ma pièce s'imprime tronquée. Sur quels paramètres faut il jouer?by Mister Fab - RepRap Groupe d'Utilisateurs Francophone
Il faut aussi t'assurer que la vitre soit parfaitement dégraissée. Perso je nettoie régulièrement à l'acétone. Avec le plateau réglable en hauteur aux 4 angles, la hauteur de première couche en 0,2 et extrudeur 0.5, température de lit 55 et température extrudeur 200, aucun problème d'accroche.by Mister Fab - RepRap Groupe d'Utilisateurs Francophone
I'll try it. Thank. There is already a four hour batch running.by Mister Fab - Reprappers
Thanks MiggyMan!! It works!!by Mister Fab - Reprappers
Thanks for the answer Dust, I tried 25000 bauds but it won't connect, I have to stay on 115200. I will take out the SD for transfers. I also checked the resistor, there are two. I can reach the first one on the white board, but the second one is behind on the green board and everything is soldered. Wich one is it?by Mister Fab - Reprappers
Hi everyone, Do you know if there is a way to force the backlight on on the 12864 LCD? It only turns on 5 seconds when I push the button, and it's not enough for me. My other question is about the USB file transfer to the SD card. It takes me 5 minutes for a 2Mb file. Do you have faster transfer rates?by Mister Fab - Reprappers
Bon après avoir appelé emotion tech, ma tête hexagon semble deconner. Il me l'ont échangé pour une j-head 0.5. Tests à venir.by Mister Fab - RepRap Groupe d'Utilisateurs Francophone
Oui, tout est bien ventilé. Je me demande si la sonde m'envoie la bonne température, peut être que mon hotend chauffe trop.by Mister Fab - RepRap Groupe d'Utilisateurs Francophone
Non, j'ai pas de tfe à l'intérieur. C'est un hotend Hexagon 3mm, avec buse 0,4by Mister Fab - RepRap Groupe d'Utilisateurs Francophone
Oui, même fabricant. Mais j'ai déjà obtenu de très bons résultats avant que ça se mette à deconner. Je pense pas qu'il soit en cause.by Mister Fab - RepRap Groupe d'Utilisateurs Francophone
Merci pour ton conseil, je vais regarder ça dès que je peux. Là où je me pose des questions c'est sur l'aspect que prend le filament. Hier en début d'après midi, j'ai réussi à sortir la colonne de calibrage de 5cm sans problème avec un bel aspect, et elle mesure la bonne taille. J'ai essayé d'extruder d'autres pièces juste après puis ça s'est mis à chier sans raison. Le plastique ne sort pasby Mister Fab - RepRap Groupe d'Utilisateurs Francophone
Salut Revolution, Merci pour ta réponse. J'ai essayé des tas de trucs en vain. En effet le fil se ronge lorsque j'extrude au niveau de la vis d'extrudeur. J'ai reserré la vis mais pas mieux. Le filament ne sort pas droit non plus, il fait des tortillons en sortant. à quel endroit jouer sur les vitesses? J'ai essayer de jouer sur la température, mais à 190 comme à 220 ça finit toujours par dby Mister Fab - RepRap Groupe d'Utilisateurs Francophone
Salut à tous. J'ai rencontré sensiblement les mêmes problèmes que vous à l'assemblage, plus un problème de noozle mal usiné, du coup impossible de faire une extrusion propre. Depuis le changement du noozle, j'ai réussi quelques impressions, mais depuis deux jours ça recommence à déconner sans que j'ai rien changé. On dirait que le filament ne veut plus sortir au bout d'un moment et toutes les iby Mister Fab - RepRap Groupe d'Utilisateurs Francophone