Show all posts by user
Page 1 of 2
Pages: 12
Results 1 — 30 of 36
@ Luis Rodriguez, how do u go about getting a UP! Printer for 1500 USD ? Im really wanna get one after ive had some many problems trying to get my mendel to print correctly. Feel free to email me ridingg@hotmail.com or pm me
Gary
by
Gary Riding
-
General
AgeingHippy Wrote:
-------------------------------------------------------
> Gary
>
> As per my post in response to your question in the
> General section - set the feed rate and flow rate
> as mentioned. Your gcode is extruding 27 meters by
> the end of that snippet you have pasted !!!
@Ageinghippy - Sorry for being stupid, but can you advise me where in skeinforge are the
by
Gary Riding
-
Skeinforge
Ok this is intresting... Ive finally have got my extruder to turn by doing the following :
opening the Gcode in notepad and use "replace" to find M101, and M103 with a blank. (( But this on its own didnt fix the problem ))
So i created the same stl file using repsnapper to create the gcode , then cut and copyed the following :.
; GCode generated by RepSnapper by Kulitorum
G21
by
Gary Riding
-
Skeinforge
my mendel runs fine, i was just wanting to use skeinforge to genarate the gcode thats all.. but after slicing the stl files in skeinforge my extruder wouldnt work, so i know its a skeinforge problem !
i have uploaded a screenshot of speed and dimensions from skeinforge.
also does anyone have a mendel with the firmware from " reprap-mendel-20100719.zip " installed and is using skeinforge,
if so
by
Gary Riding
-
General
M104 S240 T0 (Temperature to 240 celsius)
G21 (Metric FTW)
G90 (Absolute Positioning)
G92 X0 Y0 Z20 (You are now at 0,0,20)
M108 S255 (Extruder speed = max)
M6 T0 (Wait for tool to heat up)
G0 Z0 (Go back to zero.)
G90
G21
M103
M105
M115 S60.0
M116 S30.0
M117 S0.0
M108 S210.0
G1 X-20.0 Y-20.0 Z0.2 F1801.218
M101
G1 X-20.0 Y13.53 Z0.2 F1890.0
G1 X-17.56 Y13.53 Z0.2 F1890.0
G1 X-17.75 Y13.36 Z0.2 F
by
Gary Riding
-
Skeinforge
ive turned accelerate in the firmware off by blanking it out using // but fter loading the gcode in rapsnapper the stepper motor isnt doesnt move, but i can see the lights on the extruder controller flash a little and the motor trys to move but doesnt.
here is a sample of the gcode below :
M104 S240 T0 (Temperature to 240 celsius)
G21 (Metric FTW)
G90 (Absolute Positioning)
G92 X0 Y0 Z20 (You
by
Gary Riding
-
General
dazed.dnc Wrote:
-------------------------------------------------------
> If you have not adjusted the variable resistor,
> you might not be driving the motor with enough
> power. If it vibrates no mater what setting you
> use, one of the motor coils may be in reverse
> polarity from the other. Lets say you have one
> coil connected to A and B and another connected to
> C an
by
Gary Riding
-
Skeinforge
Ok, i really need help with getting skeinforge to work with my reprap mendel, ive ticked to enable dimension in skeinforge but when loading the gcode into reprap host all i get is the extruder motor not turning but is shaking like there isnt enough power to turn the motor.
does anyone know what i am doing wrong ?
by
Gary Riding
-
Skeinforge
Mmm ive turned dimension on in skeinforge but, my extruder motor isnt really turning ? any ideas ? Take note i'm a newbie to skeinforge
by
Gary Riding
-
General
thanks guys , and is there a reason why turning off acceleration in the firmware when using Skeinforge ?
by
Gary Riding
-
General
does anyone know how to get skeinforge to use e codes so i can get my extruder on my reprap mendel to work ?
by
Gary Riding
-
General
does anyone know how to reposition a stl file on the reprap build board in skeinforge ? it just when i slice the stl file using skeinforge then load it in rapsnapper it appears to be off the build area , does anyone know how to correct this problem ?
by
Gary Riding
-
Skeinforge
- mlagana wrote :
- how much is shipping of the UP! printer? Must be kinda pricey to internationally ship a fully assembled 3dprinter
Hey mlagana,
I've did a little research into the amount charged by the company for shippment of there 3d printer.... Here is what ive found :
Shipping information :
Europe & South America 192.00 dollars
by
Gary Riding
-
General
I've kinda been wondering for a while now, of what the 3d printing community think's about the fairy new " UP! 3D Printer made in china, and its price tag of 2890 USD = ( £1821 GBP ) .
Do you guy's think this is a value for money piece of kit ? or a printer with a over priced price tag ? And what do you think of its quality's, compaired to Reprap , Makerbot, BFB ,etc..
And which is the Must h
by
Gary Riding
-
General
Does anyone here know anythink about the recent project " T-Rap " which bothacker was currently working on ? Just i understood he was planning on publishing the information on the T-Rep project as opensource, but have notice his website hasnt been updated in a long time now.
Does anyone have any updates ? or information ? Would really like to make somethink like his T-Rep as my next project.
by
Gary Riding
-
General
Thank brian... do you know where i could buy one of these from ? or do you have one which you could sell me ? ready made ?
Gary
by
Gary Riding
-
General
Does anyone know of anybody who sell good extruder barrels, which are strong and ready made ? just ive been having a lot of problem with many of barrels from ebay and other company, and have found that the barrel come away from the ptfe after a number of prints....
if anyone know of anybody or if you sell such a barrel, then please get in touch.. also i am looking for another way of heating the
by
Gary Riding
-
General
Does anyone know why i am getting a runtime error "53" ( File not found ) when i click on 3d_simple.exe ?
by
Gary Riding
-
RepRap Host
Does anyone know why wades geared extruder displays werid like a star shape in reprap host software after you load its stl file ready to be sliced ?
Anyone know how to fix this ? see picture for details
gary
by
Gary Riding
-
General
Just wondering does anyone know how you reposition a stl 3d object on the build bed once loaded in RepSnapper ?
by
Gary Riding
-
RepSnapper
Hi Guy's
I am wondering if anyone can give me some advise on a problem i am having with one of the boards.. I've got myself a set of Reprap's MIDI Electronics from IPRINT3D , and after having a few problems , I desided i would re-program the motherboard and extruder controller with the latest firmware.
Ive successfully reprogrammed the motherboard , but the only problem i am having is with t
by
Gary Riding
-
Controllers
Ive uploaded the latest firmware to the motherboard... which has solved the problem...
by
Gary Riding
-
General
Hi Guy's
I am currently having a problem extruding using my mendel, which ive just only finshed..... After heating the extruder to 190c and clicking extrude in the host... the PLA comes out and wraps around the printhead and forms one big chunk..
How do i correct this problems and does anyone know why this is happening ?
Gary
by
Gary Riding
-
General
Ok... i have downloaded the Arduino software, And download the Sanguino extensions into ardunio's hardware folder so it looks like this : C:\Documents and Settings\Owner\Desktop\arduino-0018\hardware\Sanguino
It then ask's to copy the configuration.h.dist. and create a new file called configuration.h .. which i done
Then i run the Arduino Development Environment and load up the sketchbook me
by
Gary Riding
-
General
You know where it says " Download and install Arduino software, then download the Sanguino extensions from Zach's Sanguino site. " well which file do i have to download ? Would it be " Sanguino-0018r2_1_4.zip " ?
And would you recommend i use the latest's firmware from " reprap-mendel-20100702.zip " ?
Gary
by
Gary Riding
-
General
I got the MIDI version from IPrint3d, which came ready made and pre-programmed... Is there any way i can find out which version of firmware has been programmed onto the motherboard , and will i have to re-program the extruder controller too ?
Gary
by
Gary Riding
-
General
Hi Guy's
I am very new to this stuff so bare with me .... haha ....... The machine i am using is a "mendel" .. And i got my controller's from iprint3d ... he say's they where programmed using the latest "stable" version of firmware .. i am also using reprap's software from the file " reprap-mendel-20100702.zip " Not sure if that helps ?.... :s
When i use the 1.0 nudge option in "XYZ" to mo
by
Gary Riding
-
General
Hey Reprapper's,
I am currently having a slight problem with my Z Axis and was wondering it anyone know how to reslove this problem ?
The problem is when printing the z axis is moving up 5mm for each layer , but the value set under "Extruder0_ExtrusionHeight(mm)" in the reprap software is "0.3"
Does anyone know why this is happening ?
Gary
by
Gary Riding
-
General
Does anyone have a spare H21LOB which they would like to sell me... just and finding it hard to find or atleast buy a single unit of this... would be very greatful if anyone could help me out
email me ridingg@hotmail.com
Gary
by
Gary Riding
-
Wanted
Ok am stupid.... i didnt know that you had to connect a cable from scl to d10 and sca to d9
sorry guys all is working
by
Gary Riding
-
Controllers
Page 1 of 2
Pages: 12