Dust I have a question: Looking at all of the information you sent me, The wiring of my Motors and the wiring on my motors is not the same, sending what I have and how I wired my plugs, Question is it right? I have looked at 50 videos, pictures and read that many more papers on the reprap mendel prusa i3 printer.by yar60 - General
I would like to know Where do I look to find out information on wiring my control boar... I want to do it right. "sainsmart mega2560 Ramp 1.4 control board" Thank you for any help.by yar60 - General
Paul I got that SainSmart MEGA2560 Ramp 1.4 control board. looks good. I would like to know do I have to wait for the LED screen or can I run it with my computer?by yar60 - Printing
Paul. Can I just buy a new Control board and put it on my 3d printer? and what do you thing would be a good control board to buy? looking on ebay how about something like ::::: 3D Printer Kit RAMPS 1.4 MEGA2560 A4988 12864 Controller Board for RepRap Hot US Also I would like to thank you for all your help... Thank You.by yar60 - Printing
Paul got some more information on my board it's a : MKS Gen V1.3 3D Printer Controller Board Replace RAMPS 1.4 + Mega 2560, any way of fixing it or should I get a new board? the file name is: Marlin_Screw.hex Thanks Rayby yar60 - Printing
I would like to know if you every got your problem with your printer worked out or got a new board? Thank you, I have the same problem and I have the same printer.by yar60 - Prusa i3 and variants
right now it printing with nylon, and it's printing 1/2 the height, I'll include a picture. Ya it driving me up the walls, it's not a plug and play thing. and here in Price, Utah I'm the only person with a 3d printer. I have read, view videos and still nothing. got the X and Y axis working but the Y axis is the one that is not working right, now every thing I try all I get is more errors and can'by yar60 - Printing
I would like to know if anyone has the firmware for a "RepRap Prusa Mendel i3"H.I.C. print size L270*w200*180mm. Arduino Mega 2560 with RAMPS 1.4 that is all ready set up.I have been 3 weeks pulling my hair out (don't have that much to spare as it is) trying everything I can read, YouTube videos and this web site. Im 70 years old and would like to print something 3d printed before i die. damnby yar60 - Printing
Paul is there any other firmware out there that works for a RepRap prusa Mendel i3 printer? if so where do I get it? i found out how to config the firmware for my Printer RepRap Prusa i3 Mendel printer, found a video that ealked me through it, so far so go, got one error so far you may know what it is. ''" SERIAL_ECHOPGM(STRING_VERSION_CONFIG_H) """ whats next? Thanks.by yar60 - Printing
Paul I want one. Raptosaur ................ Nice.by yar60 - Printing
// default settings #define DEFAULT_AXIS_STEPS_PER_UNIT {71.582,78.7402,200.0*8/3,760*1.1} // default steps per unit for Ultimaker #define DEFAULT_MAX_FEEDRATE {500, 500, 2, 45} // (mm/sec) #define DEFAULT_MAX_ACCELERATION {180,180,10,200} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them aby yar60 - Printing
Sorry about that.... Well the cube should by 20x20x20 mm It came out 20x20x10mm can't seam to get the Y axis to full size X a okay Y a okay Now Z if off on it's own read your information about shifted layers the part about : DEFAULT MAX ACCELERATION {180,180,10,200} Mine was set at {9000,9000,100,10000} I changed it and nothing changed at all. This time I sent a picture. this is my lastby yar60 - Printing
Paul: I would like to ask a question, cant seam to find the answer to, printer working better how it only prints 1/2 height, what do I adjust? read very thing you said to read and then some I move Z 10mm and its 10 mm, any thing else to read?by yar60 - Printing
I have a RepRap Prusai3 Mandel. 270*200*200, it's been a long battle getting it running, But making progress little by little got the X axis down pat working on Y stilling drifting a little to the rear. up 2 layers and the shift to the rear 2 layers, really hard to get a picture i think you can see the drift in the 2 I'm sending. Thanks for any and all help, starting to drive me up the walls. reaby yar60 - Printing
I would like to know where? "Best to post this issue in it's own thread," I'm new to this and I was just asking for General Help. thank you for all your help. I'm getting closer now the only Drifting I have is on the "Y" axis now. but I'm doing a lot of reading and getting closer to the answers I need. Thanks Ray.by yar60 - Printing
Thank you for your help. Now to adjust the voltages you turn the "pots" right? I have them set at X=.8, Y=.8, Z=1.1 and Extruder motor at .8 does that sound right or wrong? does anyone know where to go and check on the setting? also have picture of the last test run it's drifting to the right. Again thank you for your help.by yar60 - Printing
OKay how do you adjust the setting? someone said us Arduino I got it but nothing to tell me how to use the darn program. I'm including a picture of the control board could you tell me the type of board it is so I can find out more information about it? need to know the model of it so i can get the right information. I know it's an Mendel but that's all i know not sure if it's 1.4, 1.6 or what. Tby yar60 - Printing
I have an RepRap Prusa i3 Mendel 3d printer. it seams to run okay except it drifts to the right (top picture) first layer was fine then it started drifting to the right. (bottom Picture) tried something else this time it drifed to the left. what is wrong and how do i correct it? thank you for any help.by yar60 - Printing
thank you for your note, I did try all that and still nothing, So sent it on it's way back to california this morning, I still have my Reprap Mendel prusai3 so going to read every thing I can and get it working. again thank you.by yar60 - RAMPS Electronics
Sir I would like to ask you a question what is a good 3d printer for under 400 buck. I'm going to send this thing back, so ill be looking. Thank you for your help.by yar60 - RAMPS Electronics
thank you, well a lot of reading and thinking about it. again than you. also all i get on the lcd screen is (sending picture) when its power on, when I plug just the computer in nothing at all. the screen doesnt even come on.by yar60 - RAMPS Electronics
sorry about that. here ia a .jpg file.by yar60 - RAMPS Electronics
And yes English is my FIRST and ONLY Language!!!!!!!!!!!!!!!!!!!!!! (ya sometimes I really screw it up) It's just that I'm trying to figure out what's going on with this 3D printer and trying to put it in a few words at the same time, It's driving me up the walls, The only support I get out of CHINA ia a day later and a dollar short. They say nothing at all. I found this web site one day and sby yar60 - RAMPS Electronics
nope just checked everything out again, samething as the picture i sent this morning. nothing new.by yar60 - RAMPS Electronics
I even changed the cables all it did is the screen is now blue without the little squairs. are there drivers for the control board and if so where do you get them? thank you for your help.by yar60 - RAMPS Electronics
the control board is a ATMega 2560. does that help?by yar60 - RAMPS Electronics
I would like to know if anyone out there can really help me? this is the second 3d printer I have gotten and can't get eather one of the DARN things to work. this newest one is the Euroway (hahaha) got it put togeather and can't find any firmware for the darn thing, so where does someone go to do that? downloaded CURA 15.0 and it can't find the darn thing. if simeone could please help my emailby yar60 - RAMPS Electronics