... the main difference are the fumes - some plastics are extreme toxic and carcinogenic when burned away ... remember Seweso/Dioxinby VDX - General
Hi Bob, rhmorrison Wrote: ------------------------------------------------------- > > Even the badest ones, ... > > > Is that proper English English because it's > certainly not proper American English! ... this is more like "German English" - sometimes i have similar issuesby VDX - General
... or adopt this behaviour as "RepSpam"by VDX - Russia RepRap User Group
... a word for "all files in one place" - i'm actually posting/blogging and updating my diodelaser-work ... As i was asked for more informations in complete separate forums (and languages), i started with a 'multi-places'-blogging: - so i actually have to update all relevant infos here in english and german, on the wiki in two language versions too and aditionally in a german CNC- and a specificby VDX - Plastic Extruder Working Group
... i'm following the f@h-project as long as RepRap ... As you can see, the f@h had a highly optimized start, a strict roadmap, mainly closed development ... and a relative small community RepRap on the other hand was/is much more imperfect, a bit 'shaky' and a really good candidate for 'repstrapping' with materials you have at hand or in your scrapery ... and the community 'explodes' in a neby VDX - Plastic Extruder Working Group
... um die Dioden mit einem 'richtigen' Laser zu vergleichen, habe ich mit dem Faserlaser bei 1Watt Leistung mit einer einfachen Fokussierlinse und einem Spot von etwa 30 Mikrometer Durchmesser (mit Strahlaufweiter wird der Spot kleiner 10 Mikrometer) parallele Linien mit 2mm Abstand über die vorher gelaserten Buchstaben gezogen: Die Schmelzspuren sind zwischen 40 und 80 Mikrometer breit - icby VDX - Laser-Ecke
... to compare i engraved the same material with the fiberlaser at 1Watt CW and a single focussing lens - so the spot was around 30 microns in diameter (with beamexpander the spot will be below 10 microns). The trays have 2mm distance and measure between 40 and 80 microns in width. I think the surrounding material melts and retracts, so the molten tray is much wider than the original laserspotby VDX - Laser Cutter Working Group
... here is an old post about embedding prefabbed structures and such ... or try the search with "embedding" and "All Dates" set ...by VDX - General Mendel Topics
Hi Marcus, > > and/or > > you embedd some rods or fibres for the needed > > rigidity. > > Way ahead of you. > The parts already have added support-structures. > > For some flat parts I´ll add additional ones as > they flex too much for my linking > (unfilled). ... have you constructed/fabbed the support-structures or embedded aditional insets from metal,by VDX - General Mendel Topics
Hi Marcus, ... hotglue (mostly EVA) is really elastic, so a harder filling material would be better ... and/or you embedd some rods or fibres for the needed rigidity. But anyway - excellent workby VDX - General Mendel Topics
Hi Marcus, ... have you already tried with infilling the parts with some 2K-epoxy for getting higher stability? I think with your shelled parts and solidifiyng critical objects after printing with epoxy the building time and the overall costs per set can go down dramaticallyby VDX - General Mendel Topics
... i don't see any real benefit either You can get complete single motor-drivers below $20 (i remember seing some singlechip-drivers even below &10) which need two pins per motor (DIR, CLOCK) and you can drive two or more motors synchronous so your mechanic is much faster/accurater than with only a single axis moving per timeframe ... The advantage of a discrete transisitor-array over a sby VDX - Controllers
... anbei zwei Photos von Folienschneidtests mit 1Watt bzw. 2Watt und 500mm/min Vorschub. 1 - 1Watt: zum Testen der Mindest-Anforderungen - die Gravierspur ist 0.25mm breit, die Löcher haben etwa 0.28mm Durchmesser und entstehen beim Start/Ende einer Linie oder eines Kreisbogens wegen des etwas langsameren Vorschubs 2 - 2Watt: glatter Schnitt mit einer Fuge von etwa 0.28 bis 0.3mm Breite - dby VDX - Laser-Ecke
... atached two photos where i cutted black plastic foil with 1 Watt power at 500mm/min for testing the min-limits and with 2 Watts for a clean cut. The carved tray in the first image is 0.25mm wide, the holes were melted at the start/end of lines and curves, where the moving speed was a bit slower. The holes and through-cuts have a width of 0.28 to 0.3mm - for a thinner cut i need a much betteby VDX - Laser Cutter Working Group
... for what More problems and misbehaviour than cost saving ...by VDX - Controllers
... with the naming conventions: - a RepRap is mainly built with printed parts (self-Replicating Rapid prototyper) ... all other systems should better be named RepStrap And for the accuracy: - my CNC-mill has an accuracy of 0.0125mm in halfstep-mode and corresponding better with microstepping - the repeatability of the XYZ-position is depending of the mechanical setup and even with high microstby VDX - General
... für in den Vertrieb gebrachte elektronische Komponenten dürften die allgemeinen Bedingungen gelten (TÜV/GS/CE, Elektronikschrottverordnung/Rücknahme), unabhängig davon, ob die Platinen geätzt oder gedruckt wurden. Die Frage ist eher, was du in der Richtung mit dem RepRap anders machst oder was für Kunden du hastby VDX - Altes Forum
... i've got my three IM483 together with some mechanical parts for something below 100 Euros from a german CNC-fellow what was a fair trade ... but actually we have running an exchange-group where we swap spare parts among a small (closed) community. So i received the Berger-Lahr-steppers/controllers, the lasers, filters and some other usefull stuff too without any payment - in exchange of someby VDX - Controllers
... ich habe Modulhalter und Heizelemente aus Ofen-Speckstein gefräst - das Zeug ist zwar viel 'fräsermordender' als der weiche Speckstein, den man normal zum Schnitzen nimmt, aber auch deutlich robuster. Ich habe noch einige einseitig geschliffene Fliesen in 120x120x11mm da, bei Speckstein-Winter hatte ich mir aber auch schon mal Platten in 400x300x30 bestellt ... der hat sie auch in Meter-Maßby VDX - Altes Forum
... here is a datasheet of a 1/256-microstepping driver, which can turn a standard 1.8°/200steps-stepper until 51200 steps per turn. I tested it with a Nema34-2Nm-Motor @3Amps and it's really soft and accurate driving, but with max. 10kHz you can use it in real life only until 1/32 microstepping (6400 steps per turn) ... with higher microstepping the moving speed isn't fast enough for milling orby VDX - Controllers
Hi Sebastien, ... some translations are really funny, others incorrect in essential technical terms, so we need some motivated native speakers reediting the babelfish-outputby VDX - General
... or use the right steppers - i have some 3-phase-steppers from Berger-Lahr with appropriate controllers which are specified with 200/400/500/1000 steps per turn in normal mode and 2000/4000/5000/10000 with microstepping. The possible systematic aberration is specified wit +/- 6 arcmin or +/- 0.1 degree with a maximum step-resolution of 0.036 degrees with 10000-spt-microstepping. The aberratiby VDX - Controllers
... bei der letzen Zählung bin ich etwas durcheinandergeraten, sollte aber irgendwas um die 2 herum sein ... Abgesehen davon, daß ich zur Zeit Daheim etwas wenig Zeit und Gelegenheiten habe, läuft das auf die Art schon seit über 30 Jahren - ich habe auch noch ein paar Projekte aus der Anfangszeit, die immer noch neben her vor sich hin köcheln und darauf warten, daß der Markt bzw. die Möglichkeiby VDX - Offtopic
Hi Erich, ... sind angekommen, Danke! Durch den Rauchfilter habe ich eine weitere Zwischenbaustelle, danach wollte ich parallel zu den Lasermodulen noch meine Mikro-Fräse weiterbauen ... eventuell setze ich da neben den 0.1µ-Referenzschaltern noch ein paar Encoder auf den Motorachsen als Feedback/Kontrolle rein ...by VDX - Offtopic
Hi Erich, ... with such a gigantic 'thermal mass' you'll get very long startup times until reaching the extruding temperatureby VDX - General
... das sind so die 'Rosinen' unseres Tauschkreises ... einer der Kollegen hat übers WE eine Tour von Hamburg nach Süddeutschland gemacht mit Übernachtung bei mir, da haben wir ein paar der größeren (schlecht versendbaren) 'Trümmer' getauscht. Von mir hat er eine DIN-A4-Vakuum-Belichtungs- und Ätzanlage von Isel, einen justierbaren Vakuumtisch von einer Siebdruckanlage und pneumatische Kleinteilby VDX - Laser-Ecke
... but they didn't mention the cost of the filament-cartridges anywhereby VDX - General
... anbei ein Bild des Laserauch-Absorbers - das Teil hat eine Turbine drin, die genug Saugleistung bringt, um damit einen starken Vakuumtisch oder auch einen Spänabsauger aufzubauen ... dann müßte noch ein Vorfilter davor ...by VDX - Laser-Ecke
... da ist der RepRap aber immer noch sehr gut konkurrenzfähig Und wenn ich an die Preise für HP-Tinten denke, dann wird das 'Verbrauchsmaterial' wohl ebenfalls entsprechend teuer zu Buche schlagenby VDX - Altes Forum
... some years ago i was busy developing grippers and positioning systems for pick-n-place - but more focussed on microasembling optical systems and MEMS than PCB's. If you're interested in tools: - i developed different grippers (vacuum, tweezers and morphing structures), camera-optics with tenfold DOF than normal and micro-/nano-positioners for manual or 'teleoperated' microassembly - what's pby VDX - Pick-and-Place Electronic Assembly (and robots!)