Hallo Johannes, kannst du mal dein configuration.h posten? Hast du alle Einstellungen gelassen so wie sie in Github waren? Eigentlich müsste er ja nach dem Homen der Y und X Achse in die Mitte des Bettes fahren und dort die Z Achse homen. Es sieht bei deinem Build so aus, als ob er irgendwie die falsche "Bed mitte" hat, kann das sein? Auf welcher Version basiert dein Smartrap? Standard eingevon Xhnnas - Allgemeines
Also als Anfänger könntest du mit sicherheit viel Spaß an einem Kossel Mini haben. Er ist recht einfach aufzubauen, zu kalibrieren und man kann recht fix gute ergebnisse erzielen. Zudem gibt es eine "single source" wo du alles kaufen kannst: Wenn dein Kollege dir kostenlos die Plastikteile druckt kannst du nochmal 40€ sparen. In Summe wirst du bei vielleicht 500€ liegen.von Xhnnas - Allgemeines
Guten Morgen Zusammen, ich möchte meinen Drucker in ein Gehäuse packen zwecks "Sicherheit" und Lautstärke. Aktuell steht der Drucker auf einer 6mm Multiplexplatte. Der Rahmen besteht aus Openbeam Profilen und hat die Maße 32x32x32. Damit niemand aus versehen in den Druckraum packt und sich vielleicht den Finger einklemmt oder verbrennt, möchte ich das ganze in ein Gehäuse packen, bin mir aber bevon Xhnnas - Mechanik
Still not working for me. I think this is caused by the Probe itself. If I'm probing at 0/0 he need much lesser force that at 180/0. I don't know how to describe it in english. What I mean is: at the location of 0/0 the hotend just need to tip on the glas and the enstops activate. At the location at X = 180 he has to drive down the Z Axis much more to create enough force to activate the endstop.von Xhnnas - Smart_Rap
Good Morning everybody. I tried to level the bed as described by verteez, unfortunately it did not helped. I startet with homing x and y, and traveled to 180/170, my print maximum. The endstop activates at -2,44. I used this value and added 0.01 (2.45) and insertet it for the offset. I tried to print at 180/170 my calibration cube: Nope, the nozzle scratched on the bed. I tried to increase thvon Xhnnas - Smart_Rap
Sorry, I don't get it with the X Delta. You have activated the 3 Point method, right? Where did you measured the Z offset? In the Middle of the bed or at 0/0? If you measured the height at 0/0 and for example the Z Offset at this point is 0.5. and the nozzle scratches on the bed at 180/180, do I have to choose a positiv value for the X Delta? I will post as much pictures this evening as possibvon Xhnnas - Smart_Rap
I'm terribly sorry, but I forget to make some pictures of my build, I will implement them this evening. I tried the negativ value of the offset: It's scratching on the heatbed. But finally I think the probing works much better than before. I got the tipp to clear the EEPROM with the following code: /* * EEPROM Clear * * Sets all of the bytes of the EEPROM to 0. * This example code is ivon Xhnnas - Smart_Rap
Danke, EEPROM Löschen hat geholfen jetzt funktioniert alles wie es sollvon Xhnnas - Elektrik & Elektronik
Und wie erkenne ich das? Ich kenne es nur vom RUMBA, da hat EEPROM Super funktioniert. Wo kann ich die EEPROM Baudrate definieren?von Xhnnas - Elektrik & Elektronik
Die Schrittmotoren reichen vollkommen aus für einen Kossel. Beim Extruder, würde ich auf einen Stepper mit Planetengetriebe zurückgreifen. Wenn du einen Kossel Mini baust, ist der ja sowieso in der original BOM vorgesehen.von Xhnnas - Elektrik & Elektronik
When I choose a negativ value, it crashed on the bed.von Xhnnas - Smart_Rap
#define BAUDRATE 250000 Aber warum sollte die Baudrate einfluss auf das EEPROM haben? Wie gesagt, der Drucker funktioniert einwandfrei ohne aktives EEPROMvon Xhnnas - Elektrik & Elektronik
Hätte noch einen Mega Clon von Sainsmart den ich alternativ verwenden könnte. Wo kann ich denn in Marlin den Modus 0 Auswählen? Ich kenn die Funktion nur aus der Repetier Firmware.von Xhnnas - Elektrik & Elektronik
Guten Morgen Zusammen, ich habe momentan probleme bei meinem Ramps 1.4 das EEPROM zu aktivieren. Sobald ich die Entsprechende Zeile auskommentiere und die Firmware hochlade, gibt der Drucker keinen Mux mehr von sich, in Repetier steht nur: 5 Befehle wartend. Eine Bewegung ist nicht möglich, egal welche Achse, geschweige denn Heizbett oder so erwärmen. Sobald ich die Zeile mit EEPROM wieder kovon Xhnnas - Elektrik & Elektronik
Unfortunately nothing helped. Yesterday I did the same procedure as everyday. I zeroed the Z offset in Marlin and uploaded it. I Homed the axis (Z Home is at 90/90 due to marlin firmware settings) Put a piece of Paper under it and highered the Z Axis Defined the Z Height at 1.4 Insertet Z Offset height of 1.4 into Marlin. Started to print a small 1,5cm Cube Nozzle was to close to bed and pvon Xhnnas - Smart_Rap
As I'm a little bit familiar with the probing from my kossel mini, I entered the G29 command to the start Gcode. G28; Homing G29; Probing And thats it. The Firmware is the standard Firmware attached to the smartrap master folder. As Slicer I'm using Kisslicervon Xhnnas - Smart_Rap
Good morning everybody. It has now been 2 Month since my first smartrap. My first printer was wa delta style printer, but due to the limited build area and the big dimension, I switched to a smaller printer type, the smartrap. I started with the version 0.46 with fishing line system. Because I had many slanted prints, the servo not working and some other problems, I ordered the newest version 0von Xhnnas - Smart_Rap
Lm6UU Lager scheinen generell eher selten zu sein habe ich das Gefühl. Auf den ganzen Reprap sourcing Seiten scheint man zumindest keine vernünftige Qualität zu bekommen. Generell gestaltete sich die Suche mehr als schwierig. Ich habe jetzt vorläufig auf Sinterbronzelager umgestellt, da hatte ich noch ein paar übrig und tun ihren Zweck ganz gut.von Xhnnas - Mechanik
ich habe kürzlich bei Ebay 10 LM6UU Lager erstanden, für knappe 2 euro das Stück. Angeblich qualitätslager. Leider sind beim aufschieben auf die Stangen bereits 4 Lager hops gegangen indem die Kügelchen sofort rausgesprungen sind. Die anderen 6 verbleibenden Lager sind auch nicht das gelbe vom Ei. Sie sorgen für keine kontinuierliche Vorwärtsbewegung, sondern stocken, bzw harken extrem beim Vorscvon Xhnnas - Mechanik
Also den Strom müsste er definitiv liefern. Ich habe jedoch nur 1x12V am 5A Eingang und 1x12V an 11A Eingang. Manche haben 2x12V drangepackt. Macht das den Unterschied?von Xhnnas - Elektrik & Elektronik
Good Morning, I just upgraded my printer with a heatbed. Included in the shipment was a 100k Thermistor with the following spec: Manufacturer: Murata Partno: NCP21WF104J03RA Type: Thermistors - NTC Resistance: 100 kOhms Power Rating: 200 mW Tolerance: 5 % Termination Style: SMD/SMT Operating Temperature Range: - 40 C to + 125 C Current Rating: 0.1 mA Unfortunately I didn't know which type I shvon Xhnnas - General
Moin, ich habe momentan folgendes Problem: Ich habe am Ramps ein beQuit 560 Watt Netzteil als Stromquelle. Bisher wurde es nur als für die standardelektronik benutzt. Seit neuestem habe ich jedoch auch ein Heizbett angeschlossen. Seitdem habe ich immer den merkwürdigen Fehler, dass sich das NT einfach ohne Vorwarnung oder ersichtlichen Grund abschaltet. Leistungsmangel dürfte es nicht sein, dasvon Xhnnas - Elektrik & Elektronik
Finally, I used 6mm Plywood, 1mm felt (? correct english word?) and on the top a Mk3 alu heatbed (yet not soldered, because I don't know how to solder it). The first test went fine, I used UHU gluestick to get the PLA stick to the bed. I printed a 20mm Box and it turned out 19,95x19,99 - Unfortunately the Z height was wrong with 23,xxcm, but this is dued to the wrong steps (I'm using 8mm threatedvon Xhnnas - Smart_Rap
Quoteregpye There is definitely no need to use 48mm motors. I am using 40mm motors on all my i3 machines which need more power than a Smartrap, and I am also using 40mm and even 35mm motors on the Smartraps. 48mm motors are simply overkill. that might be correct, unfortunately I only had these Motors available. Second: Due to this issue, I'm not able to print spare parts, I ordered the Kit in tvon Xhnnas - Smart_Rap
It's the j head lite attachment form version 4.9.1 from thingiverse.von Xhnnas - Smart_Rap
Hi everybody. I finished my build today and startet with the homing routine. Unfortunately I'm not able to home the Z axis. The Stepper Motor for the X Axis is touching the extruder motor before the endstops can be activated. It hits the motor ound about 5mm before the bed surface. Any Ideas what to do?von Xhnnas - Smart_Rap
Das mit DHL finde ich gut. Hermes liefert immer an einen Paket Shop der um 17 Uhr zu macht. Als Teil der arbeitenden Bevölkerung mehr als ärgerlich. Wenn ihr das Filament selbst herstellt... Könnt ihr spezielle Farben herstellen auf Bestellung? Zb. Wenn jemand einen besonderen Farbton möchte den es im Shop oder anderswo nicht gibt?von Xhnnas - Kommerzielle Angebote & Produktvorstellungen
Super danke, direkt mal probeweise bestelltvon Xhnnas - Kommerzielle Angebote & Produktvorstellungen
Did you chosed in marlin Thermistor "5"?von Xhnnas - Reprappers
Hallo zusammen, ich habe statt 6/12/19mm Lager nur welche mit 6mm Innen und 8mm Außendurchmesser bestellt. Gibt es eventuell einen druckbaren "Adapter"? Leide hat meine suche bei Thingiverse nichts gebacht, und die lm6uu die ich hier noch habe haben eine sau schlechte Qualität (trotz hohem Preis)von Xhnnas - Mechanik