Show all posts by user
People building or using RepRaps.
Re: howto: gravitech micro SD adapter to Sanguinololu pins - 12 years ago
Wish I had read this before regarding the adafruit board, I spent a frustrating evening trying to get this simple adaptor working.by QFE24 - Sanguino(lolu)
Re: Use Slic3r! - 12 years ago
Thanks for the tips, Just got my Prusa up and running, in all directions and have printed a pile of dog doo, so far. I know it's a learning curve, but wanted to say these are examples of what can be achieved. The other part is to shut the wife up who seems to be sensitive, to fine tuned steppers moving around. Many thanks for the inspiration, I will get there Regards Qby QFE24 - Printing
Re: Prusa Mendel build Abingdon Oxforshire - 12 years ago
Well the beast is up and running, it has printed loads of blobs, that very rarely look like they should in reality, I'm welcoming myself to the World of hot plastic extrusion....by QFE24 - Reprappers
Re: Sprinter firmware, All 3 axis going twice the distance - 12 years ago
The motors purr and move smoothly, so I guess it's go with what worksby QFE24 - Firmware - mainstream and related support
Re: The art of actual 3D printing and how to get good results - 12 years ago
Thanks for the tips I am just at the stage of my first prints rather than melted blobs. Regards Qby QFE24 - Printing
Sprinter firmware, All 3 axis going twice the distance - 12 years ago
Am I missing something in the sprinter firmware? In configuration.h where you set the Calibration variables, I have to enter 1/2 the expected values for a Metric Prussa Mendel, to make my machine behave. The board is set for Sanguinololu 1.2 and above = 62 I have all three jumpers M1,2,3 set for 1/16 stepping (1.8 degree steppers) If I have values of 80 for X & Y the machine travels 200mm foby QFE24 - Firmware - mainstream and related support
Prusa Mendel build Abingdon Oxforshire - 12 years ago
Just a quick introduction and to say hello. I have started gathering the parts to build a Prusa Mendel and would like to give a big thanks to all who have contributed their time and effort in this fantastic project. Regards Tomby QFE24 - Reprappers