That is a possibility. But unless you have a hot air station it will get messy probably.by brupje - RAMPS Electronics
RAMPS 1.2 is a different story. If you have stackable headers on the right like you can plug it in there. If you don't have that, you are going to have a soldering job, I guess.by brupje - RAMPS Electronics
RAMPS 1.3 and 1.4 make no difference for SD RAMPS. What is your problem?by brupje - RAMPS Electronics
Unfortunately some colors are sold out again. I'll try my best to get them back in stock ASAPby brupje - For Sale
Ik ga met Bas mee, modulair is goed. Zeker voor open source dingen die regelmatig wijzigen. Orca 0.3 lijkt ook nog niet up to date te zijn op de Wiki. Dus ik kan als open-source aanhanger geen Orca adviseren.by brupje - Dutch User Group - Archive
New shipment arrivedby brupje - For Sale
Ik doe voor 20 euro / kilo ongeveerby brupje - Dutch User Group - Archive
Now also available from reprapworld.com: timing beltsby brupje - For Sale
It's hard to tell where to start as everybody has his own budget and requirements. In the end it pays off to have considered different options. So reading a lot is a good thing here. Some of the questions are (based on Prusa as its the easiest to build):- *What are the core electrical items needed? (stepper motor drivers, Arduino MEGA, etc) - 4x NEMA 17 stepper motor with enough torque - A elecby brupje - Reprappers
ABS is back in stock now!by brupje - For Sale
The DIY-kit is now also available . Also the TCST2103 is available as separate product .by brupje - For Sale
What's wrong with that one? or do you just need alternatives?by brupje - Controllers
After an enormous amount of orders the past two weeks were are getting back on track with our stock. Most of the PLA colors are again available and . We expect the rest of the PLA and ABS next week. For larger quantities (>2KG) please contact us first.by brupje - For Sale
New: Opto end stops, completely assembled. Soon also DIY kit availableby brupje - For Sale
This offer has ended today, shipment of RAMPS 1.4 has started. RAMPS 1.3 has dropped in price, but there are only few boards left.by brupje - For Sale
You could also go for RAMPS 1.2, which is easier to build yourself and cheaper preassembledby brupje - RAMPS Electronics
You need the 12v lines for stepper drivers, heater and heated bed. That's no problem. I don't know how valid these concerns are. I had a damaged mega while using the D1, but I have no proof that it directly related to the D1 or maybe a problem with the mega in the first place. Maybe it has also to do with the quality of the 12v -> 5v power regulator or capacitors. I am not a electronics expeby brupje - RAMPS Electronics
I expect endstops this week, but not especially for gen7. This one: But it should be able to work with Gen7 none the less.by brupje - For Sale
As that page said, with D1 the Arduino is powered from the ATX supply. Some people believe that it might damage the Arduino when doing this. Without D1 the Arduino board won't have power. So this is expected behaviourby brupje - RAMPS Electronics
This is open source, general preferences are not available I am still running the FiveD code from reprap and skeinforge. I am looking into sprinter however because of the SD RAMPS. You just need Arduino software arduino.cc to upload your firmware. This will also work on Windows.by brupje - RAMPS Electronics
I have created a wiki page on the SD Ramps . It's not finished yet, but I have come a long way. Any assistance is appreciatedby brupje - RAMPS Electronics
Also I have created a SD Ramps page on the wikiby brupje - For Sale
As promised, now available: Only €19.99!by brupje - For Sale
Hi AndrewD, Thanks for your positive feedback! I already answered to you by mail, but if others have the same question regarding VAT, here is the answer again: - you will have to pay dutch VAT if you are located in a country within the EU, unless you are a company and have a valid EU tax number. You shouldn't have to pay VAT in the UK if you buy from within the EU. - Outside the EU you don't haby brupje - For Sale
I agree, I am still printing with 1.2 myself although I sell mostly 1.3 It's also much cheaper to buy/build...by brupje - RAMPS Electronics
I have RAMPS 1.4 available for preordering . RAMPS 1.4 FULL KIT (€129.00) - An Arduino mega 1280 - Fully assembled RAMPS 1.4 board - 4x Stepstick stepper drivers, including heatsinks Ramps 1.4 DIY-kit FULL (€100) - An Arduino mega 1280 - DIY RAMPS 1.4 board with components - 4x Stepstick stepper drivers, including heatsinks Ramps 1.4 DIY-kit (€29.22) - DIY RAMPS 1.4 board with components Raby brupje - For Sale
For anyone interested in SD RAMPS, I sell them in a DIY kit for 9.98 or Complete assembled coming soon.by brupje - RAMPS Electronics