Halo mas Taufiq, Saya menggunakan Huxley juga pronterface, tanpa Sli3r. Saya juga pernah mengalami yang no. 3, w? terus-menerus, saya biasa disconnect lalu saya connect lagi lalu print. Sekarang saat pakai kipas tambahan, w? muncul saat tombol print kipas masih menyala jadi kipas harus mati sebelum proses print dilakukan. Tapi kadang juga w? bisa berubah w4 atau w3 menghitung mundur sampai w0 laby herisuprapto - Indonesia RepRap User Group
Now I know, if required by the SD process faster. Perhaps this should be, what it's called, the default setting, so all of the printing process is always through SD. Yes, and I am grateful to you for helping me and to all who have read this.by herisuprapto - Printing
@zungmann Maaf pak zungmann, 4 rol ABS filamen 1.75mm dengan harga Rp. 1.160.000 sudah terjual ke Depok dengan biaya kirimnya Rp. 14.250 / rol. Kalau pak zungmann dan teman-teman ingin pesen juga bisa, tapi sekarang filamen dari 3d-printer-filament.com, untuk harga per rol yang baru akan saya konfirmasi.by herisuprapto - Indonesia RepRap User Group
If not mistaken, your message is, if SD is used for small details and curves ... Can you explain this one: These can saturate the USB line causing slowdown or pauses in the print. Sorry, I'm still learning to understand English, use Google to translate what I want to know, and learn to use the right words.by herisuprapto - Printing
@zungmann Halo pak zungmann, 1 rol beratnya 1 kg, kalau berat bersih filamennya 0,9 kg, pak zungmann mau pesen juga? Salam kenal, Heriby herisuprapto - Indonesia RepRap User Group
Thank you Spk64, TerryKidd, Komb '. I've tried it, I change my name to *. GCO at the time of upload and select them in SD Print, the printer interface displays the number of bytes such as Formula 1, until the last lap. I feel, not too much difference between the print with or without a microSD, maybe I am wrong about this ...by herisuprapto - Printing
Thanks to Komb', I'd do it by copying files (. Stl) to the microSD, and do not appear on the SD> SD Print> Pick File SD, may indeed have to use the 8.3 format, I do not know about that format? Or have changed the format of the first. Stl to 8.3-format?by herisuprapto - Printing
I read this, Preparing a file to print: ... It is recommended, however, to print from the MicroSD card for a number of reasons. ... (http://www.reprap.org/wiki/RepRapPro_Huxley_printing). I use pronterface, when I press the SD button appears inactive SD Upload and SD Print, I think you can move the files to the SD Print to micro-SD and SD Print to print the file. Is it possible to move the printby herisuprapto - Printing
Thank you konwiddak and you are very right, I've used the Minimum Layer Time: 6 seconds, by far the settings right. The result as shown in this photo attachments, the hole has been closed, but the other side to be like, what it's called, is not clean. There may be other settings related to the 'cool' that can fix it?by herisuprapto - Printing
@awasmaji Halo pak awasmaji, maaf sudah terjual semua. Kalau pak awasmaji dan teman-teman mau pesen masih bisa, saya bisa pesenkan, untuk selanjutnya filamen dari 3d-printer-filament.com, dan harga per rol akan saya konfirmasi lagi, filamennya PLA atau ABS dengan diameter 1,75 mm atau 3 mm. Kemarin ngirim ke Depok untuk 4 rol itu, Rp 57.000 atau Rp 14.250/rol. Saya berencana jadi reseller dari 3by herisuprapto - Indonesia RepRap User Group
Ada yang tinggal di Semarang?by herisuprapto - Indonesia RepRap User Group
I use Huxley with the addition of a fan, which I experienced when making a certain angle, fanless results are more rounded at the angle that I'm printing, I was using ABS.by herisuprapto - General
Sorry I do not know .... How to slow it down? Is a way to enable oozebane ....by herisuprapto - Printing
Thank you very much, your guess is appropriate at all, it was only on one side and at z moves up the hole spacing is also about 10-15mm, I think you understand more about it. I did not turn oozebane because I do not understand what it was used for, can you help me? Heriby herisuprapto - Printing
Hi, Sorry if I do not exactly use those words. I am trying to print a vase with a smaller scale, height 5 cm, such as at this address . The two images (left and center) there is a kind of, what it's called, cracks. Rightmost picture, I felt 'cracks' that can be lost after making a 2 mm thick, but it remains there as a bulge. I use the printer Huxley, pronterface, the existing settings which Huxby herisuprapto - Printing
Hi, I use Huxley, I too have experienced jams, while I feel that I belong to the PLA have different diameters, there is less and up to 2 mm in 1 roll of PLA.by herisuprapto - Printing
Hi, Sorry if I do not exactly use those words. I am trying to print a vase with a smaller scale, height 5 cm, such as at this address . The two images (left and center) there is a kind of, what it's called, cracks. Rightmost picture, I felt 'cracks' that can be lost after making a 2 mm thick, but it remains there as a bulge. I use the printer Huxley, pronterface, the existing settings which Huxby herisuprapto - Huxley
Sorry all been sold to Mr Muis. Thank you for your attention. Regards, Heriby herisuprapto - For Sale
Halo Teman-teman, Nama saya Heri dari Semarang, Jawa Tengah, Indonesia. Saya ingin menjual 4 rol filamen ABS 1,75mm. 2 rol sudah pernah digunakan, warna hijau dari Solidoodle (gambar 1) dan warna biru dari 3d-printer-filament.com (gambar 2), dan hanya digunakan untuk tes cetak (gambar 4, atas: 1,75mm PLA dari 3d-printer-filament.com). Lalu untuk 2 rol lagi, belum pernah digunakan (gambar 3), juby herisuprapto - Indonesia RepRap User Group
Hi, My name Heri from Semarang, Indonesia, I have 4 rolls 1.75 mm ABS filament, 2 has been used only to test print (purchased from Solidoodle green and blue to be purchased from 3d-printer-filament.com). I am attaching the photos, that have been used from Solidoodle (Figure 1) and is of the 3d-printer-filament.com (figure 2). And this to 2 other rolls that still have never used (Fig. 3), printiby herisuprapto - For Sale
Now, it's all taken care of, thank you. Regards, Heriby herisuprapto - Reprappers
Hi Ashley, I do not use it, do not know what I'm doing is right or not but so far everything is going well. I put it on the bottom, like this: But there is someone who had a much longer about this can tell us. Regards, Heriby herisuprapto - Reprappers
Hi, You can create a button by right-clicking around the buttons (GET POS, ECHO, etc.) appear Add Costum Button and then you can fill: Button Title (HOME ALL), Command (G28), Color (Blue). Hope this can help you. Regards, Heriby herisuprapto - Printing
Halo, Salam kenal buat semua... Petunjuk perkitannya ada di sini: Semoga membantu Heriby herisuprapto - Indonesia RepRap User Group
Hello, I think it's okay if you do not mind waiting in the booking Solidoodle and you have other alternatives. But if you've already bought it, you should always ask your order it. Hope it helps you, thanks. Regards, Heriby herisuprapto - General
Thank you for you, at last I got it from this address: . But now that the heated bed does not want to heat up, whereas before it could get hot. Whoof, I am now a dizzy head. What causes them? Or is it the cause? And what could cause this? (I am attaching the photo below). I still need more help, thank you.by herisuprapto - General
Hello, I have removed the buttons in the window Printer Interface (as I have attached), how do I restore it? Please help from you guys, thank you. Regards, Heriby herisuprapto - General
Hello, I have been practicing the explanation given by Alzibiff, by providing a photo attachment. Wire 1: The unused wire, wire 2: to a pin on the expansion headers, wire 3: connected to Btemp, wire 4: connect to Btemp - ground connection. Please corrected if there is something wrong with what I do, thank you.by herisuprapto - Huxley
Hello, Thank you for responding to me. Well I would not connect the cables to the heated bed power. I use Melzi Electronics. I do not know where to connect the four cables, which are to Btemp and / or to BED.by herisuprapto - Huxley
Hello, My name Heri, from Semarang, Indonesia. I am a newcomer, and I have difficulty in assembling Huxley in the wiring on the heated bed. I am attaching a picture, an image A to image B will continue with a description of numbers on the cable. I do not quite understand the guidelines. I want to ask, where are the cables connected? Thank you. Regards, Heriby herisuprapto - Huxley