Show all posts by user

Re: [Slightly off-topic:] Wealth without money? - 12 years ago

While I'm sure this ethos was around early on in reprap... Nah, it still happens all the time. It just doesn't get blogged or wikied, so in internet terms it doesn't exist.

Re: [Slightly off-topic:] Wealth without money? - 12 years ago

I remember how, when the Reprap project began, there was a slogan at the top-left of the homepage that read - "Wealth without money". This seems to have been somewhat de-emphasized since then, as I had to search the wiki to find it. http://reprap.org/wiki/Wealth_Without_Money Hmmm. If I remember properly, we took it down from the front page after a massive de-rail/argument/philosophy/cat fight

Re: Anyone heard of any metal deposition heads? - 12 years ago

mostly about electron beam freefrom http://reprap.org/wiki/MetalicaRap http://forums.reprap.org/list.php?215 Which you found: I am now thinking along the lines of a printer that can put out carbon fibre or other high tensile filaments in thermoplastic. We do have this which puts down one fiber at a time: http://forums.reprap.org/read.php?143,32944 http://reprap.org/wiki/SpoolHead

Re: forum->email test (Wed Aug 10 23:59:50 PDT 2011) - 12 years ago

Follow-up 2.

Re: forum->email test (Wed Aug 10 23:59:50 PDT 2011) - 12 years ago

Follow-up.

forum->email test (Wed Aug 10 23:59:50 PDT 2011) - 12 years ago

Wed Aug 10 23:59:50 PDT 2011

Re: overview of categories? How to find designs? - 12 years ago

Hmmm ... http://reprap.org/wiki/Main_Page/Sandbox_MarcusWolschon would work very well next time, when you do have the time to help the project. Thank you for your suggestions, Marcus. They've been very helpful.

Re: overview of categories? How to find designs? - 12 years ago

If you could edit http://reprap.org/wiki/Main_Page/Sandbox next time, that would make my job much easier.

Re: 2011 Maker Fair? - 12 years ago

Here's the 2011 schedule: http://blog.reprap.org/2011/03/aha-reprap-appears-do-be-doing.html 2012 Bay Area Maker Faire would probably be May 26-27.

Re: overview of categories? How to find designs? - 12 years ago

With Darwin on the right it even suggests that Darwin is the newest of the batch , Ah ... yes. Some people were very insistent that we give a shout out to one particular entrepreneur, Bits From Bytes, using the front page, and Adrian didn't want to explain to them how it is highly unfair bias to demonstrate favoritism to one and only one entrepreneur yet, especially one who maintains a separ

Re: overview of categories? How to find designs? - 12 years ago

It requires one library administrator with the right access permissions and a few hours to actually think about page navigation in the wiki and what people may be looking for and how to make it obvious and easy for them to find what is offered. Marcus, would you like to sketch out what you mean as a new wiki page?

Re: overview of categories? How to find designs? - 12 years ago

Well, we do need folk like you following http://reprap.org/wiki/Special:RecentChanges doing up new pages (with photos, renders) and making sense of the wiki.

Re: Dangerous items vs. Dangerous Censorship - 12 years ago

Relegation of "Adult" and "Weapons" discussions without models attached *may* be a potentially acceptable middle ground where the forum can have limitations markings applied to such discussion sections of the forum? So, we play host to a 'let's design a plastic derringer (no kids)' forum ... and then 6 months later a child accidentally uses the model the adults designed to slay a playmate ... I

Re: so many new spam pages, what to do? - 12 years ago

Well, we're somewhat busy deleting spam. I'll have a word with Buzz and Dave about deploying a new mediawiki extension; there may be a technical solution.

Re: 2011 Maker Fair? - 12 years ago

It's an important place to see and be seen. It'd be good to have a thoughtfully set up and well attended space there.

Re: Arm vs AVR & SD memory card support - 12 years ago

Hmmm ... these are the "Official" electronics, as far as random folk have told the wiki: http://reprap.org/wiki/Official_Electronics At some point it will know about the "Gen X Electronics" and the "Gen 10 Electronics" (I'm trying to get Camiel to name that one the "Salmon Electronics" so that he doesn't get red-queened by the Gen 11 Electronics guy the next day. According to Kliment: Indeed, I

Re: 2011 Maker Fair? - 12 years ago

Julie, I've merged this thread with the existing one. See you at next years' faire. -S

Re: Does anybody know where the RepRappers are at the MakerFaire today & tomorrow? - 12 years ago

And I am really wondering what happened to the RepRap community. ... We're very slightly disorganized. And we're not really sure who's in charge. You guys think Wade or I am in charge and should set up the booth. And I think you guys are in charge and should set up the booth. Since you guys are "Official" and so on, if you say that you're running the "Official RepRap Booth", that booth is

Re: Manufactured RepRap Project - 12 years ago

I'd suggest a t-slot (aluminum extrusion) RepStrap done up in the wiki. With a good write-up and a parts list like WolfStrap or the 1X2 bots. No one has done this, and it has been five years now. I think what happens is once they get the machine working, they lose interest in writing it up. Because they have what they need, so they're gone. It is a little bit frustrating. I created a dedicated

Re: Anyone Nearby - 12 years ago

I have tried looking for the required information on the wiki site, but to be quite honest I find it draining. I know that most, if not all, the information is in there somewhere, but it wears me out trying to access it. Our documentation is an organic process, I'm afraid. As you get going building your machine, please polish the wiki a bit for the next guy, eh?

Re: [UK] £299 Full 3d printer reprap kits April 2011 - 12 years ago

Don't forget to stuff some cad files in here: http://reprap.org/wiki/Sumpod_3D Doing the cad files as a last step that keeps getting put off results in lots of drama.

Re: Where should I document my Huxley build ? - 12 years ago

The wiki is best: You can do a stand-alone page like this: http://reprap.org/wiki/LaserCut_Mendel_Assembly_For_Complete_Beginners That stuff is easy to remix into more formal documentation. Also, join the reprap-dev mailing list, since you are probably a developer.

Wiki Page! - 12 years ago

Hi Guys! We've got a wiki page here for the group: http://reprap.org/wiki/RUG/Texas/Austin Could you guys polish that page so that it glows like a jewel? Cheers,

Re: Alernative for RepRap host - 12 years ago

http://reprap.org/wiki/CAM_Toolchains#RepRap_Drivers Good luck!

Re: Considering a new extruder design - 12 years ago

I now realise that I was wrong in using EMC2 for this and I am going to change my design to use standard reprap control electronics and motors. AAAAAAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGGGGGHHHHHHHHHHH! We almost had a chance for good documentation in http://reprap.org/wiki/EMCRepRap We were so close. So close. So close. So close So close So close So close I would like to thank re

Re: Reprap versions - 12 years ago

Re: Reprap versions - 12 years ago

It is difficult to say from our current documentation on it: http://reprap.org/wiki/Orca But Camiel stands by his work, so it is probably a quite good machine and an improvement on Prusa Mendel. We have a well defined procedure we enact in such cases, which is that we talk you into buying and building one so that we find out that yes, it is a good machine, merely one which currently lacks com

Re: Skinning - 12 years ago

Nice bit of work, James.

Re: Reprap versions - 12 years ago

Yes, the original Mendel is the Sells Mendel I'm not sure the wiki knows the "Sells Mendel" term. We probably need to tweak the wiki accordingly, since it is leading to new-folk confusion. so unless you are planning to do a lot of demos and shows I've always felt twitchy about this bit. When you're doing a demo or show, you want to drag out the big iron, not an undersized machine. Bob is

Re: Powderbed Machine - 12 years ago

can anyone recommend which stepper library to use, If you don't get any nibbles, try reprap-dev?