Hi guys, Chronic printing issues caused me to have replace the stepper feet on my cherry Pi Delta printer which were crumbling apart, this called for the electronics to be pulled apart and so I've rewired like i think it should be. The bed heats up The extruder heats up and most steppers "at least" seem to work, BUT trying to "home" in repeiter does not work as it should do. I can move theby pringleman - RAMPS Electronics
QuoteRoxy Soon there will be better Delta Auto Bed Leveling code. But it will be another 5 or 6 weeks until it is ready. good to know, thanks for this, but is there a setting I should know about to change the width of the platform.by pringleman - Firmware - Marlin
Hi Guys, Last time I messed with this, it would get five minutes through the initial stages and then a rod would pop out because it would go out too far. It would still mange to continue for some reason with 5 rods but obviously there is a problem so I canceled the procedure. Can anyone guide me how to fix this so Auto bed leveling so it works. I am in bad need to get this feature working as moby pringleman - Firmware - Marlin
Hi all, our printer is the Cherry PI, delta style, We've been trying to get it fixed for 8 months now, it randomly stopped working and would never print correctly, we tried many things, swapping electronics calbrations etc. Soo we just sent it back to the maker, after recieving it. It printed one 10 by 10 cube and then the power supply popped when initiaiting a print for cura... After that swby pringleman - General
Hi guys, I have just had a 3D printer back from repair and the PSU popped when launching CURA after one successful print with repiteir. So I replace the power supply but now nothing prints and the printing is all over the place. I am pretty sure the electronics have been corrupted from when the PSU popped. The tell sign is that there is just no conistency. If I heat the bed. it will hangby pringleman - General
Hi group, we bought a cherry pi back in september well, we're having our first major issue, I was changing the PLA over and upon starting a print. it seems the Z axis has lost it's placment, it is no longer printing on the bed but like 10mms away from this. I have tried a multitude of things, renistalling software, changing computers etc. tried it with repetier and cura, same issue all round. i'by pringleman - Delta Machines
Selling my reprap build. sadly haven't got time for it anymore.. My gain is your loss.by pringleman - For Sale
How much is total shipped to the UK thanks Jamesby pringleman - Plastic RepRap Parts for Sale
Hi how much is shipping to UK. Thanksby pringleman - Plastic RepRap Parts for Sale
Hi, Starting this up because there seems not be a thread which is about building your own gen7 from a novices perspective. Getting good and cheap electronics was not as easy, gen6 being sold out. So gen7 looked the way to go and and didn't look too complicated. There is how ever a lack of straight forward information on this. I have a PCB board which needs drilling bought from ebay. I have tby pringleman - Next Wave Electronics Working Group
Hi guys, Has any one here ever tried soldering a gen 6 pcb board and coming out with some thing that works. Demand is high for this version of electronics but stock is SO low. It seems like putting the unit together is one of the only options or go with other electronics. Good side to it is that it would be significantly cheaper. around £70. Only problem is that is looks an advanced projectby pringleman - Controllers