Show all posts by user
Page 1 of 1 Pages: 1
Results 1 — 12 of 12
thank you!!! very useful ! are you allowed to give me a link?
now i understand, i do not need magnets too advanced for what i need.
do you know a similar size bed? 12v preferably? and last if applicable similar mounting holes.
i had searched the web with no success.
by
Stoica
-
Prusa i3 and variants
hi all
please help me with the purchase of a heatbed.
i try to build a mk3 clone.
i had downloaded am made a frame and y carige from aluminium but i can not find an appropriate heatbed that can be installed on carrige / frog.
i had purchase a 220x220 heatbed with 214x214 mounting holes distances and does not fit.
what heatbed i need to buy for 210x215 holes, please see attachement. sorry for t
by
Stoica
-
Prusa i3 and variants
oh thank you for the answer
1. the G28 is new added, just a test. you the only way to change the G code is with a post processor i will see what i can do
2. if i place G91 before the fillament retract and after G90 will work?
G92 E0
G91
G1 E-20.0 F300
G90
this change must be in the pronterface buttons and in the slic3r Start and end G-code with the change from - to +
THANK YOU
by
Stoica
-
Slic3r
Hi all
i have two problems and i do not get an answer on google
1.
before start of print i use this start G code
G1 Z10 F5000 ; lift nozzle
G28 ; home all axes
G29
G1 Z10 F5000 ; lift nozzle
G28 X0
then the Z lowers to 0.2
after that it goes to pint the skirt ...etc
i want if it is possible not to edit the code manual every time
Run the start G code
get to Z 10
go to the start position of
by
Stoica
-
Slic3r
Hi all
I have a prusa i3 and recently i tried to add autobed leveling option... Printed my parts ... Scavaged electronics and put all togheder but 2 issues
And if you please help me
1. If everything is stationari M401 and M402 work perfectly
If i moove my axes.. The servo jumps a little bit and get back. Only when other axes are moved ... This sent me to queation 2
2. I had sent m49/m29 co
by
Stoica
-
Stepper Motors, Servo Motors, DC Motors
Hi there all
I have my prusa assembly 99% complete now i need to buy the stepper motors but on internet i find a lot of steppers with diffrent holding torque
What models of steppers do you use for x y z axes
Where did you buy it
by
Stoica
-
Stepper Motors, Servo Motors, DC Motors
Hi all i have a doubt about endstops for my prusa i3
1.Do you use endsops on both sides of the axis
Two endstops for one axes x+ and x-
I whant to buy from ebay... And i'm not sure how meany.
2.I whant to buy the one with led builtin. I need all the same dimmension??
by
Stoica
-
Prusa i3 and variants
Hi all
i'm about to buy the printed parts for prusa i3 rework from ebay but i found two sellers witch sells same parts but one sell parts manufactured from PLA one from ABS
Witch do you think is Better because the monney diffrence is not so big
by
Stoica
-
General
hi all i have some things that i'm not understanding about the frame!
1. i have the cad models for two prusa i3, the one from the left have a frame part (highlighted in blue) that the other one does not have
used to make the frame more rigid .... is it necessary to make it?
by
Stoica
-
General
1. I can manufacture one aluminium frame at work but.. Just one. For the future my wish is to print another one a larger printer that is why i'm intrested about the frame and the long parts.
2. Im thinking that if i print the first part .. At the end of it with a long slope\angle that will allow the hed not to touch the previosly printed part . they will stick together??
Or another idea to creat
by
Stoica
-
General
Hi all
My name is stoica and i need some info about the print area...
1.The prusa i3 can 100% print itself. The frame& bed mount
2. If i have a part that exceed prin area..can it be printed for example one half move controlled after that the other half some one had this issue??
Kind regards and have a nice day
by
Stoica
-
General