I hade exakt same problem and the wird part was that it worked if my Raspberry pi was printing but not my pc or the SD card.. After more testet it turn down to be the Adjustment on the driver as needed little more. After that it works perfect.by tintinz - Ormerod
Hey! What temprature are you printing at?by tintinz - General Mendel Topics
Not sure yet.. but after i change the potentiometer on stepper driver for Y. it seams to work.. I lower it. just little. still so I i can be sure it's not to low.by tintinz - Printing
hello! I need some help to identify this mess.. I have a Mbot Cube plywood and have change to ramps1.4 ( old arduino mega.. ) using marlin firmware. on the picture it looks like the printer is "miss stepping" but nothing sounds when it happening.. so i wanna say there is somthing with the arduino. but still not sure.. sliceing with repetier-host/slic3r 1.2.9 using my MKS TFT28 and computer wiby tintinz - Printing
Just Wondering. what do you use it for ?by tintinz - Experimental and Hobby
My frst like 5 layers get a verry uneven contour. and the rest is perfect. can it be to much extrution? I have problem with solid infill to so i think it can be to much extrution, but whay are the rest perfect then? any tips?by tintinz - Printing
Hey. i have an reprap prusa Air. and want to add auto bed levling without a switch on the extruder. my hotend are E3D hotend so my hotend are total in metal. my idea are to use the 3:th termostatis port in ramps 1.4 to detect 0 resistans between hotend and a folie on the bed. So set a clamb on the hot end and a folie bit and plase the folie on the bed. when the hotend touch the bed it get liby tintinz - Developers
I have that problem when my hobbed bolt was home made and without teeth. so i make a new one and also stronger springs on the extruder so it have a better controll of the Plastic volume.by tintinz - Printing
I have a plane to use 2 MM aluminium plate and 4 Bitcoin usb miners. Prototype. and glas on top of that. 30-40 degres Cby tintinz - General Mendel Topics
if you useing repetier-host. take a look at the temperature history. I saw that I print at 240 C and the max temp in firmware was 250 C and some times it just go up to high for a little bit and hot end and extruder just turnd off. rest of the print still moving. so look max temp of the firmwareby tintinz - General Mendel Topics
Little information to all users as are there i was for 3 month ago!by tintinz - General Mendel Topics
I love IT! i have problem with my i2! some times one of the 2 motors yous flips out and dosent move and i need to take 30 minutes for config the motor high. so i lookign for a solution to my prusa airby tintinz - General Mendel Topics
change the accelration from 3000 to 1000 in slic3rby tintinz - General Mendel Topics
try to comment this out: const bool max_software_endstops = true; //If true, axis won't move to coordinates greater than the defined lengths below. in my firmware i have one row called(repetier-firmware): // You can disable endstop checking for print moves. This is needed, if you get sometimes // false signals from your endstops. If your endstops don't give false signals, you // can set it onby tintinz - General Mendel Topics
If your endstop have 3 pins sett // to commet out this row: #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. If your end stop have 2 pins leav it like that.by tintinz - General Mendel Topics
i use repetier-host and repetier-server( for rasperrby pi) and have no problem with the temperature. No LCD. what firmware do you use?by tintinz - General Mendel Topics
Hey. I have the same problem. and my solution was: 1. try to run in slower. 2. you need to have lower accelration for the stepper driver. 3. the belt are to stretched. some firmware are running at 3000 accelrator. i run 1000 nd it's working well. the problem are if yo run att 3000. the stepper will accelerat that much but the belt will Jump over. hope that help youby tintinz - General Mendel Topics