i closed browser allways when upload failed. And i turned the machine (printer) off, but i didn't reset it. I conected my labtop with router wia cable, and now it works better. but it would be great if you ad that piece of code Thank you, for your workby Mercnik - Ormerod
Hi. I have problems uploading files via Duet Web Control. I have latest DC42 firmware and latest DWC. I get AJAX error all the time. I have this problem for a while now. Machine control works fine. And when i finaly get the file uploaded, ewerything works fine. I tried to change name of the file, and sometimes it works. And it doesnt matther if the file is a few KB or couple of MB. sometimes thby Mercnik - Ormerod
not allways on the first print it heat's up, but on the next one it doesn't. then i have to turn off the printer or even reset it to get it working again.by Mercnik - Ormerod
I have just flashed your new firmware. I get the same problem as I had with 1.04 version tool is not selected. i have T0 command in my confi.g file and in slicer start code. attached file is copy of DWC g-code console report What should I do?by Mercnik - Ormerod
Hi! I didn't do a lot of printing last week so i couldn't take screenshot of js report. I could upload files yesterday normaly, but today I have problems. I get error_connection resset.-see attached file I also have problems connecting to the web interface. I allready changed the cable to the router, but same problem. I will go and buy a new one tommorow, bouth that i have are old and maybe damby Mercnik - Ormerod
this is not my start G code- this is what slicer generates. this is my start G code T0 ;select extruder 0 G28 ; home all axes G32 ;bed leveling G92 E0 ; Reset extruder M116 ; Wait for temperature to be reached G92 E0 ; Reset extruder G1 E-1 F200 ; retract 1mm of filament G92 E0 ; Reset extruder G92 commands are probably not necessary but i didn't delet them yetby Mercnik - Ormerod
ofcourse. that was the first thing that i didby Mercnik - Ormerod
Hmm. I still have the same problem with no tool selected. I put the T0 comand in config file, but it doesn't help. I gues i will have to preheat the nossle.by Mercnik - Ormerod
I allready closed the tab, before your post. i had no problems with upload now. i waill post a printscreen when i get another error Thank'sby Mercnik - Ormerod
This is the file ; generated by Slic3r 1.1.7 on 2015-05-02 at 13:12:41 ; perimeters extrusion width = 0.17mm ; infill extrusion width = 0.52mm ; solid infill extrusion width = 0.35mm ; top infill extrusion width = 0.28mm ; support material extrusion width = 0.50mm G21 ; set units to millimeters M107 M190 S54 ; wait for bed temperature to be reached M104 S200 ; set temperature T0 ;select extrudby Mercnik - Ormerod
yes my slicer start G code T0 ;select extruder 0 G28 ; home all axes G32 ;bed leveling G92 E0 ; Reset extruder M116 ; Wait for temperature to be reached G92 E0 ; Reset extruder G1 E-1 F200 ; retract 1mm of filament G92 E0 ; Reset extruder ; layer_height = end G code G92 E0 ; set fillament coordinates to 0 G1 E-10 F200 ; retract 10 mm of filament G92 E0 ; set fillament coordinates to 0 G1 X2by Mercnik - Ormerod
I use Chrome. I'm not shure what to look for in JS console.by Mercnik - Ormerod
Hi! I changed P1 to P0 in my M563 command, and in G10 P0 S-273 R-273 command but i stil have the same problem. What am i doing wrong?by Mercnik - Ormerod
Hi! I flashed dc42 new firmware 1.04f version and new duet web control. and I have problems uploading files. either i get Ajax error or upload stops at 100% and the window can not be closed.-see attached file Once i manage to upload a file, everything works fine. what do you think could be the problem?by Mercnik - Ormerod
Hi. Just flashed new firmware. updated from your 1.00a Great work. printer seems to run smoother. I like that every new version is better, It's just hard to keep up with all the changes. So i don't know realy if i have to change some settings or that there is just a bug? I just saw one problem, after i started print job see attached file.problem 2 should i make changes to config file? defineby Mercnik - Ormerod
Hi! I haven't updated my ormerod 1 for quite some time now. I use dc42's ''1.00a-dc42'' firmware version and 1.04 ormerod control. I also use modulated Z probe. And only one extrusion head. Can I just flash your new firmware and your duet web control.? And use my old config.g file?-see attached file are there any things that I need to change? Or is it better to upgrade firmware to dc's new 1.by Mercnik - Ormerod
Ofcourse. You are right. Only IR Light affects probe. I have to think about things more. Sometimes i just don't think things thru. Thank youby Mercnik - Ormerod
But same reading, for a few hours? White sun moving around. Lights going on and off. I tought it is not possible But you are probably right! The prints were ok. Thank youby Mercnik - Ormerod
as we talked in your topic, new firmware 1.00... probe reports two identical readings example 315(315), when it should give an different modulated walue but then suddenly it reported two readings 315(326) for few hours-like it should and then it stopped, and went back to two identical readings. It didn't mather if it was in dark room, or sunny, or light shinning directlyby Mercnik - Ormerod
i deleted the bed.g file, and put P4 in config and it works now. Only the IR probe is still unmodulated. the crimps are ok. And if the wiring would be bad,i dont know if probe would work at all?by Mercnik - Ormerod
it didn't work- meaning: it stopped at P3, it did not go to P4. I thougt of sunlight too, but i tried to print in dark, and it was the same, I will check out crimps and wires, as soon as print stops.by Mercnik - Ormerod
First i tried other way around, with P3 on X220 Y0 and P4 on X100 Y100, but it didn't work. And regarding the problem from other post (New firmware.... about Modulated Z probe not working) It seems that the problem is back. It worked for few hours and then it stopped, and then started again, and now it's not. Is it a software bug, or do you think there could be some bad wires connection?by Mercnik - Ormerod
I put this in my config.g but it didn't work M557 P0 X55 Y0 ; Four... M557 P1 X55 Y175 ; ...probe points... M557 P2 X220 Y175 ; ...for bed... M557 P3 X100 Y100 ; ...levelling ... M557 P4 X220 Y0 ;...fifth one... i changed P3 and P4by Mercnik - Ormerod
I'm using your 1.00a. The lines are not separate, they are in one line. I coppied them, and rearange them just so i had better view. hmm, i used old bed.g file, that is on my computer, i did not check on SD card yet, becouse im printing something for work. I only tried to put in P4 in config.g file but it did not work. So I checked files on PC, that used to be copy, of SD files (but ofcourse i flby Mercnik - Ormerod
Hi! I have a probably basic question. How do i set 5 point auto bed leveling. Now i have 4 points, but the bed seems to be a little bit convex. (waiting for Al bed to be cut out) I've set P3(fifth point X100, Y100) in config.g, but i'm not shure, where in bed.g file should i put in 5 point, or if it has to be put anywhere else. I wanted to try this, am I correct?? G1 Z10 F200 G1 X60 Y0 F2000 G3by Mercnik - Ormerod
Strangely IR Z probe works fine now. It computes modulated value. I'm not shure why? not that i'm complaining And i did not do any configuration to my config. or any other file.by Mercnik - Ormerod
ok, i thought the b version is only for delta. and a is for others, and that you will be developing two different firmwares. my mistake.by Mercnik - Ormerod
Yes, it is connected the right way. it worked fine with your version 0.78r.by Mercnik - Ormerod