Dipende dalla versione del firmware. Il marlin che scarichi dal sito geeetech per la pro b vuole una versione vecchia di arduino ide.by eavo - Stampa 3D per principianti
Come la attivo la voce del menù per montare la sd?by eavo - GCODE, Software e Firmware
Salve a tutti, con MK 4.3.9 non riesco a visualizzare i file gcode sulla sd da display LCD. Se però mi collego alla stampante con Repetier-Host pare funzionare bene. Allego due foto senza e con collegamento a Repetier. Sto usando una GT2560. P.S. con MK 4.3.8 non ho questo problema ma non mi riprendeva la stampa dopo la pausa con la pausa avanzata attivata.by eavo - GCODE, Software e Firmware
Se invece stampo da repetier-host, mettendo in pausa sempre da lcd poi la stampa riprende normalmente.by eavo - GCODE, Software e Firmware
Buonasera a tutti, sto provando MK4duo 4.3.8 su una scheda gt2560 ma ho un problema con la pausa da lcd. Quando riprendo la stampa, l'estrusore si riporta sull'oggetto ma poi rimane fermo. Cosa può essere? (ho attivato sia NOZZLE_PARK_FEATURE sia ADVANCED_PAUSE_FEATURE)by eavo - GCODE, Software e Firmware
QuotePinzgauer can you suggest software to manipulate an .STL file to add supports before slicing? You could use Meshmixer. Video:by eavo - Slic3r
Hi guys, what settings do you use to generate supports which are easy to detach? With default settings it's hard to remove them.by eavo - Slic3r
Ciao, anche se in inglese dai un'occhiata al canale youtube di Michael Hackneyby eavo - GCODE, Software e Firmware
In slic3r I usually set extrusion width in mm because percentages are referred to the first layer heigth.by eavo - Slic3r
Ciao Luca, grazie per il lavoro svolto.by eavo - FAQ e guide
Io uso nomi cortiby eavo - Elettronica e meccanica
Yes, I set this value to 25. In this way a layer height of 0.2 mm corresponds to 5 full steps and I don't understand why slic3r makes layers of 0.16mm.by eavo - Slic3r
Hi guys, setting the Z full steps/mm in Printer Settings I have some troubles with the layer height. If I set a 0.2 layer height Slic3r makes each layer of 0.16 mm. Why? p.s. I'm using Slic3r-master.2017.12.15.1558.54205b7.64bitby eavo - Slic3r
Try setting the Z full steps/mm (25) in Printer Settings.by eavo - Slic3r
Assumendo che il piano sia ben livellato prova a cambiare il valore di Loop/Solid Infill Overlap.by eavo - Problemi e qualità di stampa